Immersion pumps
Immersion pumps (standard coolant pump) are self-venting and usually have an exposed shaft. This eliminates the need for a bearing in the pump section. The pumps are safe to run dry, wear-resistant and operate with large clearances, making them insensitive to swarf.
- Simple installation directly on the container
- Simple pipework due to SAE/replaceable flange
- Long service life, partly sealless or with low-wear plain bearings
- Multi-stage design (steep characteristic curves) possible
- Immersion depth of up to 1.5 m possible
- all wetted parts are partly available in stainless steel
• flow rate: 400 l/min at delivery head 23 m
• immersion depth: 960 mm
• power: 5.0 kW
• speed 50 Hz / 60 Hz: 2920 / 3520 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 32 m
• immersion depth: 1020 mm
• power: 5.5 kW
• speed 50 Hz / 60 Hz: 2915 / 3510 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 32 m
• immersion depth: 390 mm
• power: 5.5 kW
• speed 50 Hz / 60 Hz: 2915 / 3510 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 32 m
• immersion depth: 470 mm
• power: 5.5 kW
• speed 50 Hz / 60 Hz: 2915 / 3510 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 32 m
• immersion depth: 540 mm
• power: 5.5 kW
• speed 50 Hz / 60 Hz: 2915 / 3510 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 32 m
• immersion depth: 620 mm
• power: 5.5 kW
• speed 50 Hz / 60 Hz: 2915 / 3510 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 32 m
• immersion depth: 710 mm
• power: 5.5 kW
• speed 50 Hz / 60 Hz: 2915 / 3510 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 32 m
• immersion depth: 820 mm
• power: 5.5 kW
• speed 50 Hz / 60 Hz: 2915 / 3510 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 45 m
• immersion depth: 520 mm
• power: 7.5 kW
• speed 50 Hz / 60 Hz: 2950 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 45 m
• immersion depth: 600 mm
• power: 7.5 kW
• speed 50 Hz / 60 Hz: 2950 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 45 m
• immersion depth: 670 mm
• power: 7.5 kW
• speed 50 Hz / 60 Hz: 2950 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 45 m
• immersion depth: 750 mm
• power: 7.5 kW
• speed 50 Hz / 60 Hz: 2950 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 45 m
• immersion depth: 840 mm
• power: 7.5 kW
• speed 50 Hz / 60 Hz: 2950 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 45 m
• immersion depth: 950 mm
• power: 7.5 kW
• speed 50 Hz / 60 Hz: 2950 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 60 m
• immersion depth: 1010 mm
• power: 9.0 kW
• speed 50 Hz / 60 Hz: 2955 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 60 m
• immersion depth: 580 mm
• power: 9.0 kW
• speed 50 Hz / 60 Hz: 2955 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 60 m
• immersion depth: 660 mm
• power: 9.0 kW
• speed 50 Hz / 60 Hz: 2955 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 60 m
• immersion depth: 730 mm
• power: 9.0 kW
• speed 50 Hz / 60 Hz: 2955 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 60 m
• immersion depth: 810 mm
• power: 9.0 kW
• speed 50 Hz / 60 Hz: 2955 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 400 l/min at delivery head 60 m
• immersion depth: 900 mm
• power: 9.0 kW
• speed 50 Hz / 60 Hz: 2955 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 12 m
• immersion depth: 1100 mm
• power: 3.3 kW
• speed 50 Hz / 60 Hz: 2930 / 3520 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 12 m
• immersion depth: 200 mm
• power: 3.3 kW
• speed 50 Hz / 60 Hz: 2930 / 3520 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 12 m
• immersion depth: 300 mm
• power: 3.3 kW
• speed 50 Hz / 60 Hz: 2930 / 3520 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 12 m
• immersion depth: 430 mm
• power: 3.3 kW
• speed 50 Hz / 60 Hz: 2930 / 3520 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 12 m
• immersion depth: 550 mm
• power: 3.3 kW
• speed 50 Hz / 60 Hz: 2930 / 3520 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 12 m
• immersion depth: 750 mm
• power: 3.3 kW
• speed 50 Hz / 60 Hz: 2930 / 3520 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 12 m
• immersion depth: 980 mm
• power: 3.3 kW
• speed 50 Hz / 60 Hz: 2930 / 3520 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 24 m
• immersion depth: 1050 mm
• power: 6.0 kW
• speed 50 Hz / 60 Hz: 2950 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 24 m
• immersion depth: 1170 mm
• power: 6.0 kW
• speed 50 Hz / 60 Hz: 2950 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 24 m
• immersion depth: 270 mm
• power: 6.0 kW
• speed 50 Hz / 60 Hz: 2950 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 24 m
• immersion depth: 370 mm
• power: 6.0 kW
• speed 50 Hz / 60 Hz: 2950 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 24 m
• immersion depth: 500 mm
• power: 6.0 kW
• speed 50 Hz / 60 Hz: 2950 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 24 m
• immersion depth: 620 mm
• power: 6.0 kW
• speed 50 Hz / 60 Hz: 2950 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 24 m
• immersion depth: 820 mm
• power: 6.0 kW
• speed 50 Hz / 60 Hz: 2950 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 38 m
• immersion depth: 1120 mm
• power: 9.0 kW
• speed 50 Hz / 60 Hz: 2955 / 3550 min-1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 38 m
• immersion depth: 340 mm
• power: 9.0 kW
• speed 50 Hz / 60 Hz: 2955 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 38 m
• immersion depth: 440 mm
• power: 9.0 kW
• speed 50 Hz / 60 Hz: 2955 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 38 m
• immersion depth: 570 mm
• power: 9.0 kW
• speed 50 Hz / 60 Hz: 2955 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 38 m
• immersion depth: 690 mm
• power: 9.0 kW
• speed 50 Hz / 60 Hz: 2955 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 600 l/min at delivery head 38 m
• immersion depth: 890 mm
• power: 9.0 kW
• speed 50 Hz / 60 Hz: 2955 / 3550 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel