Immersion pumps
Immersion pumps (standard coolant pump) are self-venting and usually have an exposed shaft. This eliminates the need for a bearing in the pump section. The pumps are safe to run dry, wear-resistant and operate with large clearances, making them insensitive to swarf.
- Simple installation directly on the container
- Simple pipework due to SAE/replaceable flange
- Long service life, partly sealless or with low-wear plain bearings
- Multi-stage design (steep characteristic curves) possible
- Immersion depth of up to 1.5 m possible
- all wetted parts are partly available in stainless steel
• flow rate: 250 l/min at delivery head 5 m
• immersion depth: 440 mm
• power: 0.85 kW
• speed 50 Hz / 60 Hz: 2850 / 3450 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 250 l/min at delivery head 5 m
• immersion depth: 550 mm
• power: 0.85 kW
• speed 50 Hz / 60 Hz: 2850 / 3450 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 250 l/min at delivery head 5 m
• immersion depth: 750 mm
• power: 0.85 kW
• speed 50 Hz / 60 Hz: 2850 / 3450 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 250 l/min at delivery head 5 m
• immersion depth: 900 mm
• power: 0.85 kW
• speed 50 Hz / 60 Hz: 2850 / 3450 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 250 l/min at delivery head 12 m
• immersion depth: 170 mm
• power: 1.3 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 250 l/min at delivery head 12 m
• immersion depth: 250 mm
• power: 1.3 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 250 l/min at delivery head 12 m
• immersion depth: 320 mm
• power: 1.3 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 250 l/min at delivery head 12 m
• immersion depth: 400 mm
• power: 1.3 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 250 l/min at delivery head 12 m
• immersion depth: 490 mm
• power: 1.3 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 250 l/min at delivery head 12 m
• immersion depth: 600 mm
• power: 1.3 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 250 l/min at delivery head 12 m
• immersion depth: 800 mm
• power: 1.3 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 250 l/min at delivery head 12 m
• immersion depth: 950 mm
• power: 1.3 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 380–415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity …45 mm²/s (45 cSt)
• fluid temperature 0…80° C
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron
• impeller brass/cast steel (je nach series)
• shaft steel
• flow rate: 250 l/min at delivery head 20 m
• immersion depth: 1000 mm
• power: 1.9 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 20 m
• immersion depth: 220 mm
• power: 1.9 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 20 m
• immersion depth: 300 mm
• power: 1.9 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 20 m
• immersion depth: 370 mm
• power: 1.9 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 20 m
• immersion depth: 450 mm
• power: 1.9 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 20 m
• immersion depth: 540 mm
• power: 1.9 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 20 m
• immersion depth: 650 mm
• power: 1.9 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 20 m
• immersion depth: 850 mm
• power: 1.9 kW
• speed 50 Hz / 60 Hz: 2900 / 3500 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 27 m
• immersion depth: 1050 mm
• power: 2.6 kW
• speed 50 Hz / 60 Hz: 2880 / 3480 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 27 m
• immersion depth: 270 mm
• power: 2.6 kW
• speed 50 Hz / 60 Hz: 2880 / 3480 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 27 m
• immersion depth: 350 mm
• power: 2.6 kW
• speed 50 Hz / 60 Hz: 2880 / 3480 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 27 m
• immersion depth: 420 mm
• power: 2.6 kW
• speed 50 Hz / 60 Hz: 2880 / 3480 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 27 m
• immersion depth: 500 mm
• power: 2.6 kW
• speed 50 Hz / 60 Hz: 2880 / 3480 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 27 m
• immersion depth: 590 mm
• power: 2.6 kW
• speed 50 Hz / 60 Hz: 2880 / 3480 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 27 m
• immersion depth: 700 mm
• power: 2.6 kW
• speed 50 Hz / 60 Hz: 2880 / 3480 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 27 m
• immersion depth: 900 mm
• power: 2.6 kW
• speed 50 Hz / 60 Hz: 2880 / 3480 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 33 m
• immersion depth: 1100 mm
• power: 3.3 kW
• speed 50 Hz / 60 Hz: 2930 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 33 m
• immersion depth: 320 mm
• power: 3.3 kW
• speed 50 Hz / 60 Hz: 2930 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 33 m
• immersion depth: 400 mm
• power: 3.3 kW
• speed 50 Hz / 60 Hz: 2930 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 33 m
• immersion depth: 470 mm
• power: 3.3 kW
• speed 50 Hz / 60 Hz: 2930 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 33 m
• immersion depth: 550 mm
• power: 3.3 kW
• speed 50 Hz / 60 Hz: 2930 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 33 m
• immersion depth: 640 mm
• power: 3.3 kW
• speed 50 Hz / 60 Hz: 2930 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 33 m
• immersion depth: 750 mm
• power: 3.3 kW
• speed 50 Hz / 60 Hz: 2930 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 33 m
• immersion depth: 950 mm
• power: 3.3 kW
• speed 50 Hz / 60 Hz: 2930 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 39 m
• immersion depth: 1000 mm
• power: 4.0 kW
• speed 50 Hz / 60 Hz: 2920 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 39 m
• immersion depth: 370 mm
• power: 4.0 kW
• speed 50 Hz / 60 Hz: 2920 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 39 m
• immersion depth: 450 mm
• power: 4.0 kW
• speed 50 Hz / 60 Hz: 2920 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 39 m
• immersion depth: 520 mm
• power: 4.0 kW
• speed 50 Hz / 60 Hz: 2920 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 39 m
• immersion depth: 600 mm
• power: 4.0 kW
• speed 50 Hz / 60 Hz: 2920 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 39 m
• immersion depth: 690 mm
• power: 4.0 kW
• speed 50 Hz / 60 Hz: 2920 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 39 m
• immersion depth: 800 mm
• power: 4.0 kW
• speed 50 Hz / 60 Hz: 2920 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 45 m
• immersion depth: 420 mm
• power: 5.0 kW
• speed 50 Hz / 60 Hz: 2920 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 45 m
• immersion depth: 500 mm
• power: 5.0 kW
• speed 50 Hz / 60 Hz: 2920 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 45 m
• immersion depth: 570 mm
• power: 5.0 kW
• speed 50 Hz / 60 Hz: 2920 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 45 m
• immersion depth: 650 mm
• power: 5.0 kW
• speed 50 Hz / 60 Hz: 2920 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 45 m
• immersion depth: 740 mm
• power: 5.0 kW
• speed 50 Hz / 60 Hz: 2920 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 45 m
• immersion depth: 850 mm
• power: 5.0 kW
• speed 50 Hz / 60 Hz: 2920 / 3520 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel
• flow rate: 250 l/min at delivery head 52 m
• immersion depth: 520 mm
• power: 6.0 kW
• speed 50 Hz / 60 Hz: 2950 / 3550 min?1
• semi-open impeller
• voltage 220-240/380-415 V/50 Hz or 460 V/60 Hz
application
• pumped media coolant emulsions
• cooling and cutting oils
• kinematic viscosity ...45 mm²/s (45 cSt)
• fluid temperature 0...80° C (TA302: 0...60° C)
• higher temperatures on request
construction
• pump body grey cast iron
• cover grey cast iron / Polyoxymethylen (POM) (TA302)
• impeller brass / Polyoxymethylen (POM) (TA302)
• shaft steel
Auf Wunsch
• suction cover with connection thread
• impeller cast steel