Skip to main content Skip to search Skip to navigation

AC motors

Induction motors
Reversible induction motors
Low-Speed Synchronous Motors SMK Series
Motors with electromagnetic brake
Reluctance motor
AC speed-control motors
Torque Motor K Series
Gearhead
Watertight, Dust-Resistant Motors FPW Series
Linear heads
Accessories
Standard Item name from A to Z Item name from Z to A Price in ascending order Price in descending order Weight SKU Release date Newest first GTIN Bestsellers
10 20 30 40 50
Items 1 - 30 of 191
MSC-1 SPEED CONTROLLER (REPLACEMENT FOR ES02)
MSC-1 SPEED CONTROLLER (REPLACEMENT FOR ES02)
MSC-1 SPEED CONTROLLER (REPLACEMENT FOR ES02)
inkl. control circuit, CN1 connector, Operating Manual Controller Type Electronic Alarm Type Power Supply Input Voltage single-Phase 100/110/115 VAC±10% Single-Phase200/220/230 VAC±10% Power Supply Input Frequency 50/60 Hz Speed Setting Methods Set the speed in the following way. • Internal setting device • External Speed Potentiometer: Accessories (Sold separately)PAVR-20KZ (20 kΩ, 1/4 W) • External Voltage: 0–5 VDC & –10 VDC switching, 1 mA min. Function Speed Control, Instantaneous Stop, Bi-Direction, Speed Change, Acceleration/Deceleration (0.3-15 seconds: 1000 r/min At no load) Control Power Supply 24 VDC±10%, 100 mA min. Input Signal Photocoupler Input 4.7 kΩ FWD, REV, INT/EXT, ALARM-RESET Output Signal Open-Collector Output 30 VDC max. SPEED-OUT: 10 mA max., ALARM-OUT: 40 mA max. Protective Function When the following protective functions are activated, the motor will come to a coasting stop, and the alarm output will be turned OFF. The LED of the speed controller blinks the number of times in parentheses( ). • Motor Lock (2 Times): When the motor output shaft is restrained for 5 seconds min., or when the tachogenerator wire is disconnected or poorly connected. • Motor Overheat (9 Times): When the motor's built-in thermal protector operates (OPEN). When the motor wire is broken or poorly connected.
SKU:
MSC-1
Shipping weight:
0.25 kg
Item weight:
0.15 kg
138,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-A GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-A GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: -
  • Time Rating: Continuous
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • Overheat Protective Device Type: Thermal protector
  • Mass: 5.0 kg
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-A
Shipping weight:
6.50 kg
Item weight:
5.00 kg
210,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-9RH GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-9RH GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 9
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 167 r/min
    Three-Phase 380 VAC / 60 Hz: 200 r/min
    Three-Phase 400 VAC / 50 Hz: 167 r/min
    Three-Phase 400 VAC / 60 Hz: 200 r/min
    Three-Phase 415 VAC / 50 Hz: 167 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 9.7 N·m
    Three-Phase 380 VAC / 60 Hz: 8.1 N·m
    Three-Phase 400 VAC / 50 Hz: 9.7 N·m
    Three-Phase 400 VAC / 60 Hz: 8.1 N·m
    Three-Phase 415 VAC / 50 Hz: 9.7 N·m
  • Permissible Inertia J: 162×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-9RH
Shipping weight:
13.00 kg
Item weight:
10.00 kg
414,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-9RA GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-9RA GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 9
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 167 r/min
    Three-Phase 380 VAC / 60 Hz: 200 r/min
    Three-Phase 400 VAC / 50 Hz: 167 r/min
    Three-Phase 400 VAC / 60 Hz: 200 r/min
    Three-Phase 415 VAC / 50 Hz: 167 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 9.7 N·m
    Three-Phase 380 VAC / 60 Hz: 8.1 N·m
    Three-Phase 400 VAC / 50 Hz: 9.7 N·m
    Three-Phase 400 VAC / 60 Hz: 8.1 N·m
    Three-Phase 415 VAC / 50 Hz: 9.7 N·m
  • Permissible Inertia J: 162×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-9RA
Shipping weight:
13.00 kg
Item weight:
10.00 kg
407,00 € *
Available
Delivery time: ca. 6 weeks
BHI62UT2-90RH GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-90RH GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 90
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 17 r/min
    Three-Phase 380 VAC / 60 Hz: 20 r/min
    Three-Phase 400 VAC / 50 Hz: 17 r/min
    Three-Phase 400 VAC / 60 Hz: 20 r/min
    Three-Phase 415 VAC / 50 Hz: 17 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 51.5 N·m
    Three-Phase 380 VAC / 60 Hz: 51.5 N·m
    Three-Phase 400 VAC / 50 Hz: 51.5 N·m
    Three-Phase 400 VAC / 60 Hz: 51.5 N·m
    Three-Phase 415 VAC / 50 Hz: 51.5 N·m
  • Permissible Inertia J: 5000×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-90RH
Shipping weight:
13.00 kg
Item weight:
10.00 kg
432,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-90RA GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-90RA GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 90
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 17 r/min
    Three-Phase 380 VAC / 60 Hz: 20 r/min
    Three-Phase 400 VAC / 50 Hz: 17 r/min
    Three-Phase 400 VAC / 60 Hz: 20 r/min
    Three-Phase 415 VAC / 50 Hz: 17 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 51.5 N·m
    Three-Phase 380 VAC / 60 Hz: 51.5 N·m
    Three-Phase 400 VAC / 50 Hz: 51.5 N·m
    Three-Phase 400 VAC / 60 Hz: 51.5 N·m
    Three-Phase 415 VAC / 50 Hz: 51.5 N·m
  • Permissible Inertia J: 5000×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-90RA
Shipping weight:
13.00 kg
Item weight:
10.00 kg
426,00 € *
Available
Delivery time: ca. 6 weeks
BHI62UT2-90 GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-90 GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 90
  • Time Rating: Continuous
  • Rotation Direction: same direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 17 r/min
    Three-Phase 380 VAC / 60 Hz: 20 r/min
    Three-Phase 400 VAC / 50 Hz: 17 r/min
    Three-Phase 400 VAC / 60 Hz: 20 r/min
    Three-Phase 415 VAC / 50 Hz: 17 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 40 N·m
    Three-Phase 380 VAC / 60 Hz: 40 N·m
    Three-Phase 400 VAC / 50 Hz: 40 N·m
    Three-Phase 400 VAC / 60 Hz: 40 N·m
    Three-Phase 415 VAC / 50 Hz: 40 N·m
  • Permissible Inertia J: 5000×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 8.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-90
Shipping weight:
10.40 kg
Item weight:
8.00 kg
351,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-9 GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-9 GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 9
  • Time Rating: Continuous
  • Rotation Direction: same direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 167 r/min
    Three-Phase 380 VAC / 60 Hz: 200 r/min
    Three-Phase 400 VAC / 50 Hz: 167 r/min
    Three-Phase 400 VAC / 60 Hz: 200 r/min
    Three-Phase 415 VAC / 50 Hz: 167 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 11.9 N·m
    Three-Phase 380 VAC / 60 Hz: 10 N·m
    Three-Phase 400 VAC / 50 Hz: 11.9 N·m
    Three-Phase 400 VAC / 60 Hz: 10 N·m
    Three-Phase 415 VAC / 50 Hz: 11.9 N·m
  • Permissible Inertia J: 162×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 8.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-9
Shipping weight:
10.40 kg
Item weight:
8.00 kg
335,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-75RH GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-75RH GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 75
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 20 r/min
    Three-Phase 380 VAC / 60 Hz: 24 r/min
    Three-Phase 400 VAC / 50 Hz: 20 r/min
    Three-Phase 400 VAC / 60 Hz: 24 r/min
    Three-Phase 415 VAC / 50 Hz: 20 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 47 N·m
    Three-Phase 380 VAC / 60 Hz: 47 N·m
    Three-Phase 400 VAC / 50 Hz: 47 N·m
    Three-Phase 400 VAC / 60 Hz: 47 N·m
    Three-Phase 415 VAC / 50 Hz: 47 N·m
  • Permissible Inertia J: 5000×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-75RH
Shipping weight:
13.00 kg
Item weight:
10.00 kg
432,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-75RA GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-75RA GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 75
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 20 r/min
    Three-Phase 380 VAC / 60 Hz: 24 r/min
    Three-Phase 400 VAC / 50 Hz: 20 r/min
    Three-Phase 400 VAC / 60 Hz: 24 r/min
    Three-Phase 415 VAC / 50 Hz: 20 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 47 N·m
    Three-Phase 380 VAC / 60 Hz: 47 N·m
    Three-Phase 400 VAC / 50 Hz: 47 N·m
    Three-Phase 400 VAC / 60 Hz: 47 N·m
    Three-Phase 415 VAC / 50 Hz: 47 N·m
  • Permissible Inertia J: 5000×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-75RA
Shipping weight:
13.00 kg
Item weight:
10.00 kg
426,00 € *
Available
Delivery time: ca. 6 weeks
BHI62UT2-75 GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-75 GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 75
  • Time Rating: Continuous
  • Rotation Direction: same direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 20 r/min
    Three-Phase 380 VAC / 60 Hz: 24 r/min
    Three-Phase 400 VAC / 50 Hz: 20 r/min
    Three-Phase 400 VAC / 60 Hz: 24 r/min
    Three-Phase 415 VAC / 50 Hz: 20 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 40 N·m
    Three-Phase 380 VAC / 60 Hz: 40 N·m
    Three-Phase 400 VAC / 50 Hz: 40 N·m
    Three-Phase 400 VAC / 60 Hz: 40 N·m
    Three-Phase 415 VAC / 50 Hz: 40 N·m
  • Permissible Inertia J: 5000×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 8.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-75
Shipping weight:
10.40 kg
Item weight:
8.00 kg
351,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-7.5RH GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-7.5RH GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 7.5
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 200 r/min
    Three-Phase 380 VAC / 60 Hz: 240 r/min
    Three-Phase 400 VAC / 50 Hz: 200 r/min
    Three-Phase 400 VAC / 60 Hz: 240 r/min
    Three-Phase 415 VAC / 50 Hz: 200 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 8 N·m
    Three-Phase 380 VAC / 60 Hz: 6.8 N·m
    Three-Phase 400 VAC / 50 Hz: 8 N·m
    Three-Phase 400 VAC / 60 Hz: 6.8 N·m
    Three-Phase 415 VAC / 50 Hz: 8 N·m
  • Permissible Inertia J: 112×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-7.5RH
Shipping weight:
13.00 kg
Item weight:
10.00 kg
414,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-7.5RA GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-7.5RA GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 7.5
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 200 r/min
    Three-Phase 380 VAC / 60 Hz: 240 r/min
    Three-Phase 400 VAC / 50 Hz: 200 r/min
    Three-Phase 400 VAC / 60 Hz: 240 r/min
    Three-Phase 415 VAC / 50 Hz: 200 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 8 N·m
    Three-Phase 380 VAC / 60 Hz: 6.8 N·m
    Three-Phase 400 VAC / 50 Hz: 8 N·m
    Three-Phase 400 VAC / 60 Hz: 6.8 N·m
    Three-Phase 415 VAC / 50 Hz: 8 N·m
  • Permissible Inertia J: 112×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-7.5RA
Shipping weight:
13.00 kg
Item weight:
10.00 kg
407,00 € *
Available
Delivery time: ca. 6 weeks
BHI62UT2-7.5 GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-7.5 GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 7.5
  • Time Rating: Continuous
  • Rotation Direction: same direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 200 r/min
    Three-Phase 380 VAC / 60 Hz: 240 r/min
    Three-Phase 400 VAC / 50 Hz: 200 r/min
    Three-Phase 400 VAC / 60 Hz: 240 r/min
    Three-Phase 415 VAC / 50 Hz: 200 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 9.9 N·m
    Three-Phase 380 VAC / 60 Hz: 8.4 N·m
    Three-Phase 400 VAC / 50 Hz: 9.9 N·m
    Three-Phase 400 VAC / 60 Hz: 8.4 N·m
    Three-Phase 415 VAC / 50 Hz: 9.9 N·m
  • Permissible Inertia J: 112×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 8.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-7.5
Shipping weight:
10.40 kg
Item weight:
8.00 kg
335,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-6RH GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-6RH GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 6
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 250 r/min
    Three-Phase 380 VAC / 60 Hz: 300 r/min
    Three-Phase 400 VAC / 50 Hz: 250 r/min
    Three-Phase 400 VAC / 60 Hz: 300 r/min
    Three-Phase 415 VAC / 50 Hz: 250 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 6.4 N·m
    Three-Phase 380 VAC / 60 Hz: 5.4 N·m
    Three-Phase 400 VAC / 50 Hz: 6.4 N·m
    Three-Phase 400 VAC / 60 Hz: 5.4 N·m
    Three-Phase 415 VAC / 50 Hz: 6.4 N·m
  • Permissible Inertia J: 72×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-6RH
Shipping weight:
13.00 kg
Item weight:
10.00 kg
414,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-6RA GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-6RA GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 6
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 250 r/min
    Three-Phase 380 VAC / 60 Hz: 300 r/min
    Three-Phase 400 VAC / 50 Hz: 250 r/min
    Three-Phase 400 VAC / 60 Hz: 300 r/min
    Three-Phase 415 VAC / 50 Hz: 250 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 6.4 N·m
    Three-Phase 380 VAC / 60 Hz: 5.4 N·m
    Three-Phase 400 VAC / 50 Hz: 6.4 N·m
    Three-Phase 400 VAC / 60 Hz: 5.4 N·m
    Three-Phase 415 VAC / 50 Hz: 6.4 N·m
  • Permissible Inertia J: 72×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-6RA
Shipping weight:
13.00 kg
Item weight:
10.00 kg
407,00 € *
Available
Delivery time: ca. 6 weeks
BHI62UT2-60RH GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-60RH GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 60
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 25 r/min
    Three-Phase 380 VAC / 60 Hz: 30 r/min
    Three-Phase 400 VAC / 50 Hz: 25 r/min
    Three-Phase 400 VAC / 60 Hz: 30 r/min
    Three-Phase 415 VAC / 50 Hz: 25 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 43 N·m
    Three-Phase 380 VAC / 60 Hz: 43 N·m
    Three-Phase 400 VAC / 50 Hz: 43 N·m
    Three-Phase 400 VAC / 60 Hz: 43 N·m
    Three-Phase 415 VAC / 50 Hz: 43 N·m
  • Permissible Inertia J: 5000×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-60RH
Shipping weight:
13.00 kg
Item weight:
10.00 kg
432,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-60RA GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-60RA GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 60
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 25 r/min
    Three-Phase 380 VAC / 60 Hz: 30 r/min
    Three-Phase 400 VAC / 50 Hz: 25 r/min
    Three-Phase 400 VAC / 60 Hz: 30 r/min
    Three-Phase 415 VAC / 50 Hz: 25 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 43 N·m
    Three-Phase 380 VAC / 60 Hz: 43 N·m
    Three-Phase 400 VAC / 50 Hz: 43 N·m
    Three-Phase 400 VAC / 60 Hz: 43 N·m
    Three-Phase 415 VAC / 50 Hz: 43 N·m
  • Permissible Inertia J: 5000×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-60RA
Shipping weight:
13.00 kg
Item weight:
10.00 kg
426,00 € *
Available
Delivery time: ca. 6 weeks
BHI62UT2-60 GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-60 GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 60
  • Time Rating: Continuous
  • Rotation Direction: same direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 25 r/min
    Three-Phase 380 VAC / 60 Hz: 30 r/min
    Three-Phase 400 VAC / 50 Hz: 25 r/min
    Three-Phase 400 VAC / 60 Hz: 30 r/min
    Three-Phase 415 VAC / 50 Hz: 25 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 40 N·m
    Three-Phase 380 VAC / 60 Hz: 40 N·m
    Three-Phase 400 VAC / 50 Hz: 40 N·m
    Three-Phase 400 VAC / 60 Hz: 40 N·m
    Three-Phase 415 VAC / 50 Hz: 40 N·m
  • Permissible Inertia J: 5000×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 8.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-60
Shipping weight:
10.40 kg
Item weight:
8.00 kg
351,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-6 GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-6 GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 6
  • Time Rating: Continuous
  • Rotation Direction: same direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 250 r/min
    Three-Phase 380 VAC / 60 Hz: 300 r/min
    Three-Phase 400 VAC / 50 Hz: 250 r/min
    Three-Phase 400 VAC / 60 Hz: 300 r/min
    Three-Phase 415 VAC / 50 Hz: 250 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 7.9 N·m
    Three-Phase 380 VAC / 60 Hz: 6.7 N·m
    Three-Phase 400 VAC / 50 Hz: 7.9 N·m
    Three-Phase 400 VAC / 60 Hz: 6.7 N·m
    Three-Phase 415 VAC / 50 Hz: 7.9 N·m
  • Permissible Inertia J: 72×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 8.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-6
Shipping weight:
10.40 kg
Item weight:
8.00 kg
335,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-5RH GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-5RH GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 5
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 300 r/min
    Three-Phase 380 VAC / 60 Hz: 360 r/min
    Three-Phase 400 VAC / 50 Hz: 300 r/min
    Three-Phase 400 VAC / 60 Hz: 360 r/min
    Three-Phase 415 VAC / 50 Hz: 300 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 5.4 N·m
    Three-Phase 380 VAC / 60 Hz: 4.5 N·m
    Three-Phase 400 VAC / 50 Hz: 5.4 N·m
    Three-Phase 400 VAC / 60 Hz: 4.5 N·m
    Three-Phase 415 VAC / 50 Hz: 5.4 N·m
  • Permissible Inertia J: 50×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-5RH
Shipping weight:
13.00 kg
Item weight:
10.00 kg
414,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-5RA GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-5RA GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 5
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 300 r/min
    Three-Phase 380 VAC / 60 Hz: 360 r/min
    Three-Phase 400 VAC / 50 Hz: 300 r/min
    Three-Phase 400 VAC / 60 Hz: 360 r/min
    Three-Phase 415 VAC / 50 Hz: 300 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 5.4 N·m
    Three-Phase 380 VAC / 60 Hz: 4.5 N·m
    Three-Phase 400 VAC / 50 Hz: 5.4 N·m
    Three-Phase 400 VAC / 60 Hz: 4.5 N·m
    Three-Phase 415 VAC / 50 Hz: 5.4 N·m
  • Permissible Inertia J: 50×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-5RA
Shipping weight:
13.00 kg
Item weight:
10.00 kg
407,00 € *
Available
Delivery time: ca. 6 weeks
BHI62UT2-50RH GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-50RH GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 50
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 30 r/min
    Three-Phase 380 VAC / 60 Hz: 36 r/min
    Three-Phase 400 VAC / 50 Hz: 30 r/min
    Three-Phase 400 VAC / 60 Hz: 36 r/min
    Three-Phase 415 VAC / 50 Hz: 30 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 40 N·m
    Three-Phase 380 VAC / 60 Hz: 40 N·m
    Three-Phase 400 VAC / 50 Hz: 40 N·m
    Three-Phase 400 VAC / 60 Hz: 40 N·m
    Three-Phase 415 VAC / 50 Hz: 40 N·m
  • Permissible Inertia J: 5000×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-50RH
Shipping weight:
13.00 kg
Item weight:
10.00 kg
432,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-50RA GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-50RA GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 50
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 30 r/min
    Three-Phase 380 VAC / 60 Hz: 36 r/min
    Three-Phase 400 VAC / 50 Hz: 30 r/min
    Three-Phase 400 VAC / 60 Hz: 36 r/min
    Three-Phase 415 VAC / 50 Hz: 30 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 40 N·m
    Three-Phase 380 VAC / 60 Hz: 40 N·m
    Three-Phase 400 VAC / 50 Hz: 40 N·m
    Three-Phase 400 VAC / 60 Hz: 40 N·m
    Three-Phase 415 VAC / 50 Hz: 40 N·m
  • Permissible Inertia J: 5000×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-50RA
Shipping weight:
13.00 kg
Item weight:
10.00 kg
426,00 € *
Available
Delivery time: ca. 6 weeks
BHI62UT2-50 GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-50 GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 50
  • Time Rating: Continuous
  • Rotation Direction: same direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 30 r/min
    Three-Phase 380 VAC / 60 Hz: 36 r/min
    Three-Phase 400 VAC / 50 Hz: 30 r/min
    Three-Phase 400 VAC / 60 Hz: 36 r/min
    Three-Phase 415 VAC / 50 Hz: 30 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 40 N·m
    Three-Phase 380 VAC / 60 Hz: 40 N·m
    Three-Phase 400 VAC / 50 Hz: 40 N·m
    Three-Phase 400 VAC / 60 Hz: 40 N·m
    Three-Phase 415 VAC / 50 Hz: 40 N·m
  • Permissible Inertia J: 5000×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 8.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-50
Shipping weight:
10.40 kg
Item weight:
8.00 kg
351,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-5 GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-5 GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 5
  • Time Rating: Continuous
  • Rotation Direction: same direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 300 r/min
    Three-Phase 380 VAC / 60 Hz: 360 r/min
    Three-Phase 400 VAC / 50 Hz: 300 r/min
    Three-Phase 400 VAC / 60 Hz: 360 r/min
    Three-Phase 415 VAC / 50 Hz: 300 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 6.6 N·m
    Three-Phase 380 VAC / 60 Hz: 5.6 N·m
    Three-Phase 400 VAC / 50 Hz: 6.6 N·m
    Three-Phase 400 VAC / 60 Hz: 5.6 N·m
    Three-Phase 415 VAC / 50 Hz: 6.6 N·m
  • Permissible Inertia J: 50×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 8.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-5
Shipping weight:
10.40 kg
Item weight:
8.00 kg
335,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-36RH GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-36RH GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 36
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 42 r/min
    Three-Phase 380 VAC / 60 Hz: 50 r/min
    Three-Phase 400 VAC / 50 Hz: 42 r/min
    Three-Phase 400 VAC / 60 Hz: 50 r/min
    Three-Phase 415 VAC / 50 Hz: 42 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 36 N·m
    Three-Phase 380 VAC / 60 Hz: 32.6 N·m
    Three-Phase 400 VAC / 50 Hz: 36 N·m
    Three-Phase 400 VAC / 60 Hz: 32.6 N·m
    Three-Phase 415 VAC / 50 Hz: 36 N·m
  • Permissible Inertia J: 2592×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-36RH
Shipping weight:
13.00 kg
Item weight:
10.00 kg
414,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-36RA GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-36RA GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 36
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 42 r/min
    Three-Phase 380 VAC / 60 Hz: 50 r/min
    Three-Phase 400 VAC / 50 Hz: 42 r/min
    Three-Phase 400 VAC / 60 Hz: 50 r/min
    Three-Phase 415 VAC / 50 Hz: 42 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 36 N·m
    Three-Phase 380 VAC / 60 Hz: 32.6 N·m
    Three-Phase 400 VAC / 50 Hz: 36 N·m
    Three-Phase 400 VAC / 60 Hz: 32.6 N·m
    Three-Phase 415 VAC / 50 Hz: 36 N·m
  • Permissible Inertia J: 2592×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-36RA
Shipping weight:
13.00 kg
Item weight:
10.00 kg
407,00 € *
Available
Delivery time: ca. 6 weeks
BHI62UT2-36 GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-36 GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 36
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 42 r/min
    Three-Phase 380 VAC / 60 Hz: 50 r/min
    Three-Phase 400 VAC / 50 Hz: 42 r/min
    Three-Phase 400 VAC / 60 Hz: 50 r/min
    Three-Phase 415 VAC / 50 Hz: 42 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 40 N·m
    Three-Phase 380 VAC / 60 Hz: 38.4 N·m
    Three-Phase 400 VAC / 50 Hz: 40 N·m
    Three-Phase 400 VAC / 60 Hz: 38.4 N·m
    Three-Phase 415 VAC / 50 Hz: 40 N·m
  • Permissible Inertia J: 2592×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 8.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-36
Shipping weight:
10.40 kg
Item weight:
8.00 kg
342,00 € *
Available
Delivery time: ca. 5 weeks
BHI62UT2-30RH GENERAL-PURPOSE MOTOR BH SERIES
BHI62UT2-30RH GENERAL-PURPOSE MOTOR BH SERIES
• Description of Specification Items
  • Frame Size: 104 mm
  • Output Power: 200 W
  • series: BH series
  • Type: With Terminal Box
  • Gear Ratio: 30
  • Time Rating: Continuous
  • Rotation Direction: opposite direction as the motor shaft
  • Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.56 A
    Three-Phase380 VAC / 60 Hz / 0.54 A
    Three-Phase400 VAC / 50 Hz / 0.55 A
    Three-Phase400 VAC / 60 Hz / 0.52 A
    Three-Phase415 VAC / 50 Hz / 0.54 A
  • Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m
  • Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 380 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 400 VAC / 50 Hz: 1.47 N·m / 1300 r/min
    Three-Phase 400 VAC / 60 Hz: 1.24 N·m / 1550 r/min
    Three-Phase 415 VAC / 50 Hz: 1.47 N·m / 1300 r/min
  • The Speed When Installing gearhead: Three-Phase 380 VAC / 50 Hz: 50 r/min
    Three-Phase 380 VAC / 60 Hz: 60 r/min
    Three-Phase 400 VAC / 50 Hz: 50 r/min
    Three-Phase 400 VAC / 60 Hz: 60 r/min
    Three-Phase 415 VAC / 50 Hz: 50 r/min
  • Permissible Torque of gearhead Output Shaft: Three-Phase 380 VAC / 50 Hz: 32.2 N·m
    Three-Phase 380 VAC / 60 Hz: 27.2 N·m
    Three-Phase 400 VAC / 50 Hz: 32.2 N·m
    Three-Phase 400 VAC / 60 Hz: 27.2 N·m
    Three-Phase 415 VAC / 50 Hz: 32.2 N·m
  • Permissible Inertia J: 1800×10-4 kg·m2
  • Overheat Protective Device Type: Thermal protector
  • Mass: 10.0 kg (With gearhead)
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
SKU:
BHI62UT2-30RH
Shipping weight:
13.00 kg
Item weight:
10.00 kg
414,00 € *
Available
Delivery time: ca. 5 weeks
Items 1 - 30 of 191