Skip to main content Skip to search Skip to navigation

IE3 Stainless steel three-phase motor | 1.10 kW | 4-pole | Frame size 90 S | B5/200 | AISI 316 | IP69K | TENV | PTC

Technical data

General
Power 1.10 kW
Poles 4
Frame size 90 S
Mounting B5
Electrical data
Rated speed 1460 min⁻¹
Rated current in catalogue 2.9 A
IE class in catalogue IE3
Efficiency at rated load 84 %
Efficiency at 75% load 82 %
Efficiency at 50% load 81 %
Power factor 0.7
Rated torque 7.2 Nm
Starting / rated current 9
Starting / rated torque 4.8
Breakdown / rated torque 6
Mechanical data
Flange outside / pitch circle / pilot 200 / 165 / 130 mm
Flange fixing 4 × Ø12
Pilot height T 3.5 mm
Pilot tolerance j6
Shaft 24 × 50 mm
Shaft tolerance j6
Threaded hole in shaft end M8
Key width 8 mm
G 20 mm
GD 7 mm
L 333 mm
AC 166 mm
Y 30 mm
R ≤ 0 mm
Housing AISI 316
Product weight (excluding packaging) 32 kg
Drive-end bearing (DE) 6205 2RZ
Non-drive-end bearing (NDE) 6203 2RZ
Cable gland M25 × 1.5
Protection and equipment
Protection IP69K
Cooling TENV
Thermal protection Built-in PTC
Efficiency requirements
EU minimum requirement (where applicable) IE3
Minimum efficiency at 50 Hz 84.1 %
Minimum requirement basis (EU) 2019/1781. Annex I
IE classification standard IEC 60034-30-1:2025

The minimum requirement specifies the required supplied version. It is not an additional manufacturer efficiency-class declaration.

Price on request
  • Currently out of stock