Skip to main content Skip to search Skip to navigation

IE2 Stainless steel three-phase motor | 0.37 kW | 4-pole | Frame size 71 B | B5/160 | AISI 316 | IP69K | TENV | PTC

Technical data

General
Power 0.37 kW
Poles 4
Frame size 71 B
Mounting B5
Electrical data
Rated speed 1440 min⁻¹
Rated current in catalogue 1.1 A
IE class in catalogue IE2
Efficiency at rated load 79 %
Power factor 0.64
Rated torque 2.5 Nm
Starting / rated current 8
Starting / rated torque 4
Breakdown / rated torque 5
Mechanical data
Flange outside / pitch circle / pilot 160 / 130 / 110 mm
Flange fixing 4 × Ø10
Pilot height T 3.5 mm
Pilot tolerance j6
Shaft 14 × 30 mm
Shaft tolerance j6
Threaded hole in shaft end M5
Key width 5 mm
G 11 mm
GD 5 mm
L 285 mm
AC 131 mm
Y 25 mm
R ≤ 0 mm
Housing AISI 316
Product weight (excluding packaging) 16 kg
Drive-end bearing (DE) 6202 2RZ
Non-drive-end bearing (NDE) 6202 2RZ
Cable gland M20 × 1.5
Protection and equipment
Protection IP69K
Cooling TENV
Thermal protection Built-in PTC
Efficiency requirements
EU minimum requirement (where applicable) IE2
Minimum efficiency at 50 Hz 72.7 %
Minimum requirement basis (EU) 2019/1781. Annex I
IE classification standard IEC 60034-30-1:2025

The minimum requirement specifies the required supplied version. It is not an additional manufacturer efficiency-class declaration.

Price on request
  • Currently out of stock