Skip to main content Skip to search Skip to navigation

IE2 Stainless steel three-phase motor | 0.18 kW | 4-pole | Frame size 63 B | B14A/90 | AISI 316 | IP69K | TENV | PTC

Technical data

General
Power 0.18 kW
Poles 4
Frame size 63 B
Mounting B14A
Electrical data
Rated speed 1440 min⁻¹
Rated current in catalogue 0.58 A
IE class in catalogue IE2
Efficiency at rated load 75 %
Power factor 0.62
Rated torque 1.2 Nm
Starting / rated current 7.5
Starting / rated torque 3.5
Breakdown / rated torque 4.5
Mechanical data
Flange outside / pitch circle / pilot 90 / 75 / 60 mm
Flange fixing 4 × M6
Pilot height T 2.5 mm
Pilot tolerance j6
Shaft 11 × 23 mm
Shaft tolerance j6
Threaded hole in shaft end M4
Key width 4 mm
G 8.5 mm
GD 4 mm
L 243 mm
AC 131 mm
Y 22 mm
R ≤ 0 mm
Housing AISI 316
Product weight (excluding packaging) 12 kg
Drive-end bearing (DE) 6202 2RZ
Non-drive-end bearing (NDE) 6202 2RZ
Cable gland M16 × 1.5
Protection and equipment
Protection IP69K
Cooling TENV
Thermal protection Built-in PTC
Efficiency requirements
EU minimum requirement (where applicable) IE2
Minimum efficiency at 50 Hz 64.7 %
Minimum requirement basis (EU) 2019/1781. Annex I
IE classification standard IEC 60034-30-1:2025

The minimum requirement specifies the required supplied version. It is not an additional manufacturer efficiency-class declaration.

Price on request
  • Currently out of stock