Self-priming pumps

This category includes Calpeda self-priming pumps for water supply, well water extraction, pressure boosting, irrigation, drainage and a wide range of domestic, commercial and industrial applications.

The range covers different pump technologies – from self-priming jet pumps and liquid ring pumps to centrifugal pumps with open impellers and horizontal multistage self-priming centrifugal pumps. This allows different requirements for flow rate, head, pumped liquid, materials and supply voltage to be matched to the application.

Self-priming pumps for wells, water supply and pressure boosting
Jet pumps with built-in ejector
Multistage self-priming centrifugal pumps for higher delivery heads
Liquid ring pumps for applications involving air or gas in the pumped liquid
Open-impeller centrifugal pumps for clean or slightly dirty water
Cast-iron, bronze and stainless-steel versions
Single-phase and three-phase motor versions available

This category includes the Calpeda A, CA, MXA, NG, NGL and NGX series. When selecting the appropriate pump, the required flow rate, delivery head, suction lift, pumped liquid, material, connection size and supply voltage should be considered.

NGX 4/110 self-priming stainless steel jet pump

Construction: High quality self-priming, ingot type, ingot type, with built-in ejector and pump housing of stainless steel
Design: Stainless steel design with pump housing and housing cover from AISI 304
Applications: For well extraction, extraction of water with air or gas content, pressure increase, domestic water supply, garden watering and water jet cleaning
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 0,75 kW / 1 HP
Rated current: 3,7 A at 230 V / 2,2 A at 400 V
Rated speed: 2800 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 4,5 m3/h
Maximum pump head according to the characteristic curve: 41,6 m
Characteristic curve Q/H: 0 m3/h → 41,6 m; 0,3 m3/h → 40 m; 0,5 m3/h → 39 m; 1 m3/h → 36,6 m; 2 m3/h → 31,9 m; 2,4 m3/h → 30 m; 3 m3/h → 27,3 m; 3,2 m3/h → 26,4 m; 3,6 m3/h → 24,6 m; 4 m3/h → 23 m; 4,5 m3/h → 21,1 m3/h
Media temperature: 0 to +35 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 8 bar
Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
Dimensions: a 115 mm; b 30 mm; fM 391 mm; g1 10 mm; h1 116 mm; h2 61 mm; HD 192 mm; l5 161.00 mm; m1 33 mm; m2 25 mm; m3 8 mm; n1 146 mm; n2 112 mm; s 9 mm; w 95 mm; w1 112 mm
Article weight: 10,9 kg
Materials: pump housing and housing cover AISI 304; wheel brass CW617N, at NGX 2/80, 3/100 and 4/110 Noryl PPO-GF20; Diffuser and ejector Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; Brass runner

SKU:: 72A51040000
Shipping weight:: 14.17 kg
Item weight:: 10.90 kg

289,54 € *

Available

Delivery time: ca. 3 weeks

A 40-110A/B self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 0,75 kW / 1 HP
Rated current: 3,7 A at 230 V / 2,2 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 18 m3/h
Maximum pump head according to the characteristic curve: 17,2 m
Characteristic curve Q/H: 0 m3/h → 17,2 m; 3,6 m3/h → 15,4 m; 4,8 m3/h → 14,9 m; 6 m3/h → 14,2 m; 7,5 m3/h → 13,3 m; 8,4 m3/h → 12,9 m; 9,6 m3/h → 12,1 m; 10,8 m3/h → 11,3 m; 12 m3/h → 10,5 m; 15 m3/h → 8,4 m; 18 m3/h → 5,6 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1 1/2
Dimensions: a 132 mm; b 50 mm; fM 393 mm; g1 12 mm; h1 208 mm; h2 67 mm; HD 206 mm; l1 83 mm; l2 89 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; s 16 mm; w 199 mm
Article weight: 20,7 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: BB

SKU:: 60F00382000
Shipping weight:: 26.91 kg
Item weight:: 20.70 kg

841,20 € *

Available

Delivery time: ca. 3 weeks

A 40-110B/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 0,55 kW / 0,75 HP
Rated current: 2,8 A at 230 V / 1,6 A at 400 V
Rated speed: 2900 min-1
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 18 m3/h
Maximum pump head according to the characteristic curve: 14,4 m
Characteristic curve Q/H: 0 m3/h → 14,4 m; 3,6 m3/h → 12,9 m; 4,8 m3/h → 12,4 m; 6 m3/h → 11,8 m; 7,5 m3/h → 11 m; 8,4 m3/h → 10,4 m; 9,6 m3/h → 9,8 m; 10,8 m3/h → 9 m; 12 m3/h → 8,3 m; 15 m3/h → 6 m; 18 m3/h → 3,4 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1 1/2
Dimensions: a 132 mm; b 50 mm; fM 393 mm; g1 12 mm; h1 208 mm; h2 67 mm; HD 206 mm; l1 83 mm; l2 89 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; s 16 mm; w 199 mm
Article weight: 19,5 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 60F00341000
Shipping weight:: 25.35 kg
Item weight:: 19.50 kg

770,65 € *

Available

Delivery time: ca. 3 weeks

A 50-125A/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Rated current: 7,5 A at 230 V / 4,3 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 33 m3/h
Maximum pump head according to the characteristic curve: 20,5 m
Characteristic curve Q/H: 0 m3/h → 20,5 m; 6 m3/h → 19,5 m; 9 m3/h → 19 m; 12 m3/h → 18 m; 15 m3/h → 17 m; 18 m3/h → 15,5 m; 21 m3/h → 14 m; 24 m3/h → 12,5 m; 27 m3/h → 10,5 m; 30 m3/h → 8 m; 33 m3/h → 5 m
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
Article weight: 29,8 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 60F00902000
Shipping weight:: 38.74 kg
Item weight:: 29.80 kg

1.132,91 € *

Available

Delivery time: ca. 3 weeks

A 50-125B/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 1,1 kW / 1,5 HP
Rated current: 4,6 A at 230 V / 2,7 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 30 m3/h
Maximum pump head according to the characteristic curve: 16,5 m
Characteristic curve Q/H: 0 m3/h → 16,5 m; 6 m3/h → 15,5 m; 9 m3/h → 14,9 m; 12 m3/h → 14,2 m; 15 m3/h → 12,9 m; 18 m3/h → 11,6 m; 21 m3/h → 10 m; 24 m3/h → 8,3 m; 27 m3/h → 6,2 m; 30 m3/h → 4 m
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
Article weight: 28,3 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 60F00862000
Shipping weight:: 36.79 kg
Item weight:: 28.30 kg

1.088,46 € *

Available

Delivery time: ca. 3 weeks

A 50-125CE self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 0,75 kW / 1 HP
Rated current: 4 A at 230 V / 2,3 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 27 m3/h
Maximum pump head according to the characteristic curve: 13,7 m
Characteristic curve Q/H: 0 m3/h → 13,7 m; 6 m3/h → 12,8 m; 9 m3/h → 12,2 m; 12 m3/h → 11,3 m; 15 m3/h → 10 m; 18 m3/h → 8,5 m; 21 m3/h → 7 m; 24 m3/h → 5,3 m; 27 m3/h → 3,3 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
Article weight: 26,2 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier

SKU:: 60F00821000
Shipping weight:: 34.06 kg
Item weight:: 26.20 kg

1.067,06 € *

Available

Delivery time: ca. 3 weeks

A 65-150A/C self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 400 V / 690 V ±10 %, 50 Hz
Engine rated power P2: 4 kW / 5,5 HP
Rated current: 9,6 A at 400 V / 5,5 A at 690 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 57 m3/h
Maximum pump head according to the characteristic curve: 30,8 m
Characteristic curve Q/H: 0 m3/h → 30,8 m; 15 m3/h → 29 m; 18 m3/h → 28 m; 24 m3/h → 27 m; 30 m3/h → 25,5 m; 33 m3/h → 24,5 m; 36 m3/h → 23,5 m; 42 m3/h → 21 m; 48 m3/h → 18 m; 54 m3/h → 14 m; 57 m3/h → 11 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2 1/2; Pressure side DN2 G 2 1/2
Dimensions: a 172 mm; b 50 mm; fM 595 mm; g1 12 mm; h1 293 mm; h2 75 mm; HD 270 mm; l1 115 mm; l2 121 mm; m1 125 mm; m2 95 mm; n1 240 mm; n2 190 mm; n3 47 mm; s 16 mm; w 324 mm
Article weight: 55,3 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: C

SKU:: 60F01644000
Shipping weight:: 71.89 kg
Item weight:: 55.30 kg

1.844,49 € *

Available

Delivery time: ca. 3 weeks

A 65-150B/B self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 3 kW / 4 HP
Rated current: 11,5 A at 230 V / 6,6 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 54 m3/h
Maximum pump head according to the characteristic curve: 22,8 m
Characteristic curve Q/H: 0 m3/h → 22,8 m; 15 m3/h → 21,5 m; 18 m3/h → 21 m; 24 m3/h → 19,5 m; 30 m3/h → 17,5 m; 33 m3/h → 16,5 m; 36 m3/h → 15,5 m; 42 m3/h → 12,5 m; 48 m3/h → 9,5 m; 54 m3/h → 6,5 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2 1/2; Pressure side DN2 G 2 1/2
Dimensions: a 172 mm; b 50 mm; fM 595 mm; g1 12 mm; h1 293 mm; h2 75 mm; HD 270 mm; l1 115 mm; l2 121 mm; m1 125 mm; m2 95 mm; n1 240 mm; n2 190 mm; n3 47 mm; s 16 mm; w 324 mm
Article weight: 52 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: BB

SKU:: 60F01583000
Shipping weight:: 67.60 kg
Item weight:: 52.00 kg

1.798,38 € *

Available

Delivery time: ca. 3 weeks

A 65-150C/C self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 2,2 kW / 3 HP
Rated current: 11,5 A at 230 V / 6,6 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 48 m3/h
Maximum pump head according to the characteristic curve: 18,8 m
Characteristic curve Q/H: 0 m3/h → 18,8 m; 15 m3/h → 17,5 m; 18 m3/h → 17 m; 24 m3/h → 16 m; 30 m3/h → 14 m; 33 m3/h → 13 m; 36 m3/h → 11,5 m; 42 m3/h → 9 m; 48 m3/h → 6,5 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2 1/2; Pressure side DN2 G 2 1/2
Dimensions: a 172 mm; b 50 mm; fM 635 mm; g1 12 mm; h1 293 mm; h2 75 mm; HD 260 mm; l1 115 mm; l2 121 mm; m1 125 mm; m2 95 mm; n1 240 mm; n2 190 mm; n3 47 mm; s 16 mm; w 364 mm
Article weight: 51,6 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: C

SKU:: 60F01542000
Shipping weight:: 67.08 kg
Item weight:: 51.60 kg

1.643,52 € *

Available

Delivery time: ca. 3 weeks

A 80-170A/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 400 V / 690 V ±10 %, 50 Hz
Engine rated power P2: 7,5 kW / 10 HP
Rated current: 14,3 A at 400 V / 8,3 A at 690 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 66 m3/h
Maximum pump head according to the characteristic curve: 35 m
Characteristic curve Q/H: 0 m3/h → 35 m; 15 m3/h → 33,6 m; 18 m3/h → 33,2 m; 21 m3/h → 32,9 m; 24 m3/h → 32,5 m; 30 m3/h → 31,6 m; 36 m3/h → 30,5 m; 45 m3/h → 28,1 m; 54 m3/h → 25,3 m; 60 m3/h → 23,2 m; 66 m3/h → 20,4 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 3; Pressure side DN2 G 3
Dimensions: a 202 mm; b 60 mm; fM 694 mm; g1 16 mm; h1 342 mm; h2 85 mm; HD 327 mm; l1 132 mm; l2 140 mm; m1 145 mm; m2 110 mm; n1 280 mm; n2 220 mm; n3 49 mm; s 18 mm; w 366 mm
Article weight: 86,1 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 60F02042000
Shipping weight:: 111.93 kg
Item weight:: 86.10 kg

2.831,76 € *

Available

Delivery time: ca. 3 weeks

A 80-170B/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 400 V / 690 V ±10 %, 50 Hz
Engine rated power P2: 5,5 kW / 7,5 HP
Rated current: 10,8 A at 400 V / 6,2 A at 690 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 66 m3/h
Maximum pump head according to the characteristic curve: 28 m
Characteristic curve Q/H: 0 m3/h → 28 m; 15 m3/h → 27,3 m; 18 m3/h → 27,3 m; 21 m3/h → 27 m; 24 m3/h → 26,8 m; 30 m3/h → 25,7 m; 36 m3/h → 24,4 m; 45 m3/h → 22,1 m; 54 m3/h → 19 m; 60 m3/h → 16,7 m; 66 m3/h → 13,7 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 3; Pressure side DN2 G 3
Dimensions: a 202 mm; b 60 mm; fM 694 mm; g1 16 mm; h1 342 mm; h2 85 mm; HD 327 mm; l1 132 mm; l2 140 mm; m1 145 mm; m2 110 mm; n1 280 mm; n2 220 mm; n3 49 mm; s 18 mm; w 366 mm
Article weight: 80,5 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 60F02022000
Shipping weight:: 104.65 kg
Item weight:: 80.50 kg

2.662,37 € *

Available

Delivery time: ca. 3 weeks

AM 40-110A/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 0,75 kW / 1 HP
Maximum power consumption P1: 1,01 kW
Rated current: 5,7 A at 230 V
Rated speed: 2900 min-1
Efficiency class: IE2
Degree of protection: IP54
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: to 18 m3/h
Maximum pump head according to the characteristic curve: 17,2 m
Characteristic curve Q/H: 0 m3/h → 17,2 m; 3,6 m3/h → 15,4 m; 4,8 m3/h → 14,9 m; 6 m3/h → 14,2 m; 7,5 m3/h → 13,3 m; 8,4 m3/h → 12,9 m; 9,6 m3/h → 12,1 m; 10,8 m3/h → 11,3 m; 12 m3/h → 10,5 m; 15 m3/h → 8,4 m; 18 m3/h → 5,6 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1 1/2
Dimensions: a 132 mm; b 50 mm; fM 393 mm; g1 12 mm; h1 208 mm; h2 67 mm; HD 206 mm; l1 83 mm; l2 89 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; s 16 mm; w 199 mm
Article weight: 20,9 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 60G00381000
Shipping weight:: 27.17 kg
Item weight:: 20.90 kg

841,20 € *

Available

Delivery time: ca. 3 weeks

AM 40-110B/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 0,55 kW / 0,75 HP
Maximum power consumption P1: 0,78 kW
Rated current: 4,5 A at 230 V
Rated speed: 2900 min-1
Efficiency class: IE2
Degree of protection: IP54
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: to 18 m3/h
Maximum pump head according to the characteristic curve: 14,4 m
Characteristic curve Q/H: 0 m3/h → 14,4 m; 3,6 m3/h → 12,9 m; 4,8 m3/h → 12,4 m; 6 m3/h → 11,8 m; 7,5 m3/h → 11 m; 8,4 m3/h → 10,4 m; 9,6 m3/h → 9,8 m; 10,8 m3/h → 9 m; 12 m3/h → 8,3 m; 15 m3/h → 6 m; 18 m3/h → 3,4 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1 1/2
Dimensions: a 132 mm; b 50 mm; fM 393 mm; g1 12 mm; h1 208 mm; h2 67 mm; HD 206 mm; l1 83 mm; l2 89 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; s 16 mm; w 199 mm
Article weight: 19,9 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 60G00341000
Shipping weight:: 25.87 kg
Item weight:: 19.90 kg

770,65 € *

Available

Delivery time: ca. 3 weeks

AM 50-125AE self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Maximum power consumption P1: 2,1 kW
Rated current: 9,2 A at 230 V
Rated speed: 2900 min-1
Degree of protection: IP54
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: to 33 m3/h
Maximum pump head according to the characteristic curve: 20,5 m
Characteristic curve Q/H: 0 m3/h → 20,5 m; 6 m3/h → 19,5 m; 9 m3/h → 19 m; 12 m3/h → 18 m; 15 m3/h → 17 m; 18 m3/h → 15,5 m; 21 m3/h → 14 m; 24 m3/h → 12,5 m; 27 m3/h → 10,5 m; 30 m3/h → 8 m; 33 m3/h → 5 m
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
Article weight: 29,9 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier

SKU:: 60G00901000
Shipping weight:: 38.87 kg
Item weight:: 29.90 kg

1.243,40 € *

Available

Delivery time: ca. 3 weeks

AM 50-125BE self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 1,1 kW / 1,5 HP
Maximum power consumption P1: 1,44 kW
Rated current: 7,4 A at 230 V
Rated speed: 2900 min-1
Efficiency class: IE2
Degree of protection: IP54
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: to 30 m3/h
Maximum pump head according to the characteristic curve: 16,5 m
Characteristic curve Q/H: 0 m3/h → 16,5 m; 6 m3/h → 15,5 m; 9 m3/h → 14,9 m; 12 m3/h → 14,2 m; 15 m3/h → 12,9 m; 18 m3/h → 11,6 m; 21 m3/h → 10 m; 24 m3/h → 8,3 m; 27 m3/h → 6,2 m; 30 m3/h → 4 m
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
Article weight: 30 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier

SKU:: 60G00861000
Shipping weight:: 39.00 kg
Item weight:: 30.00 kg

1.152,92 € *

Available

Delivery time: ca. 3 weeks

AM 50-125CE self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Cast iron version with pump housing and lantern from GJL 200
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer single-phase induction motor with thermal protection
Rated voltage: 230 V ±10 %, 50 Hz
Engine rated power P2: 0,75 kW / 1 HP
Maximum power consumption P1: 1,01 kW
Rated current: 5,8 A at 230 V
Rated speed: 2900 min-1
Efficiency class: IE2
Degree of protection: IP54
Insulation class: F
Operation mode: S3 60 %
Flow according to characteristic curve: to 27 m3/h
Maximum pump head according to the characteristic curve: 13,7 m
Characteristic curve Q/H: 0 m3/h → 13,7 m; 6 m3/h → 12,8 m; 9 m3/h → 12,2 m; 12 m3/h → 11,3 m; 15 m3/h → 10 m; 18 m3/h → 8,5 m; 21 m3/h → 7 m; 24 m3/h → 5,3 m; 27 m3/h → 3,3 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
Article weight: 28,2 kg
Materials: pump housing, suction housing and impeller GJL 200; shaft depending on the size AISI 303 or AISI 430F; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier

SKU:: 60G00821000
Shipping weight:: 36.66 kg
Item weight:: 28.20 kg

1.110,03 € *

Available

Delivery time: ca. 3 weeks

BA 40-110A/B self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 0,75 kW / 1 HP
Rated current: 3,7 A at 230 V / 2,2 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 18 m3/h
Maximum pump head according to the characteristic curve: 17,2 m
Characteristic curve Q/H: 0 m3/h → 17,2 m; 3,6 m3/h → 15,4 m; 4,8 m3/h → 14,9 m; 6 m3/h → 14,2 m; 7,5 m3/h → 13,3 m; 8,4 m3/h → 12,9 m; 9,6 m3/h → 12,1 m; 10,8 m3/h → 11,3 m; 12 m3/h → 10,5 m; 15 m3/h → 8,4 m; 18 m3/h → 5,6 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1 1/2
Dimensions: a 132 mm; b 50 mm; fM 393 mm; g1 12 mm; h1 208 mm; h2 67 mm; HD 206 mm; l1 83 mm; l2 89 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; s 16 mm; w 199 mm
Article weight: 23,3 kg
Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: BB

SKU:: 61F00382000
Shipping weight:: 30.29 kg
Item weight:: 23.30 kg

2.160,73 € *

Available

Delivery time: ca. 3 weeks

BA 40-110B/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 0,55 kW / 0,75 HP
Rated current: 2,8 A at 230 V / 1,6 A at 400 V
Rated speed: 2900 min-1
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 18 m3/h
Maximum pump head according to the characteristic curve: 14,4 m
Characteristic curve Q/H: 0 m3/h → 14,4 m; 3,6 m3/h → 12,9 m; 4,8 m3/h → 12,4 m; 6 m3/h → 11,8 m; 7,5 m3/h → 11 m; 8,4 m3/h → 10,4 m; 9,6 m3/h → 9,8 m; 10,8 m3/h → 9 m; 12 m3/h → 8,3 m; 15 m3/h → 6 m; 18 m3/h → 3,4 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1 1/2
Dimensions: a 132 mm; b 50 mm; fM 393 mm; g1 12 mm; h1 208 mm; h2 67 mm; HD 206 mm; l1 83 mm; l2 89 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; s 16 mm; w 199 mm
Article weight: 21,6 kg
Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 61F00341000
Shipping weight:: 28.08 kg
Item weight:: 21.60 kg

2.088,87 € *

Available

Delivery time: ca. 3 weeks

BA 50-125A/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 1,5 kW / 2 HP
Rated current: 7,5 A at 230 V / 4,3 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 33 m3/h
Maximum pump head according to the characteristic curve: 20,5 m
Characteristic curve Q/H: 0 m3/h → 20,5 m; 6 m3/h → 19,5 m; 9 m3/h → 19 m; 12 m3/h → 18 m; 15 m3/h → 17 m; 18 m3/h → 15,5 m; 21 m3/h → 14 m; 24 m3/h → 12,5 m; 27 m3/h → 10,5 m; 30 m3/h → 8 m; 33 m3/h → 5 m
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
Article weight: 35 kg
Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 61F00902000
Shipping weight:: 45.50 kg
Item weight:: 35.00 kg

2.546,14 € *

Available

Delivery time: ca. 3 weeks

BA 50-125B/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 1,1 kW / 1,5 HP
Rated current: 4,6 A at 230 V / 2,7 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 30 m3/h
Maximum pump head according to the characteristic curve: 16,5 m
Characteristic curve Q/H: 0 m3/h → 16,5 m; 6 m3/h → 15,5 m; 9 m3/h → 14,9 m; 12 m3/h → 14,2 m; 15 m3/h → 12,9 m; 18 m3/h → 11,6 m; 21 m3/h → 10 m; 24 m3/h → 8,3 m; 27 m3/h → 6,2 m; 30 m3/h → 4 m
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
Article weight: 32,7 kg
Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 61F00862000
Shipping weight:: 42.51 kg
Item weight:: 32.70 kg

2.474,19 € *

Available

Delivery time: ca. 3 weeks

BA 50-125CE self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 0,75 kW / 1 HP
Rated current: 4 A at 230 V / 2,3 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 27 m3/h
Maximum pump head according to the characteristic curve: 13,7 m
Characteristic curve Q/H: 0 m3/h → 13,7 m; 6 m3/h → 12,8 m; 9 m3/h → 12,2 m; 12 m3/h → 11,3 m; 15 m3/h → 10 m; 18 m3/h → 8,5 m; 21 m3/h → 7 m; 24 m3/h → 5,3 m; 27 m3/h → 3,3 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2; Pressure side DN2 G 2
Dimensions: a 147 mm; b 50 mm; fM 490 mm; g1 12 mm; h1 231 mm; h2 64 mm; HD 223 mm; l1 96 mm; l2 102 mm; m1 100 mm; m2 70 mm; n1 190 mm; n2 140 mm; n3 30 mm; s 16 mm; w 263 mm
Article weight: 31,2 kg
Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier

SKU:: 61F00821000
Shipping weight:: 40.56 kg
Item weight:: 31.20 kg

2.436,61 € *

Available

Delivery time: ca. 3 weeks

BA 65-150A/B self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 400 V / 690 V ±10 %, 50 Hz
Engine rated power P2: 4 kW / 5,5 HP
Rated current: 9,6 A at 400 V / 5,5 A at 690 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 57 m3/h
Maximum pump head according to the characteristic curve: 30,8 m
Characteristic curve Q/H: 0 m3/h → 30,8 m; 15 m3/h → 29 m; 18 m3/h → 28 m; 24 m3/h → 27 m; 30 m3/h → 25,5 m; 33 m3/h → 24,5 m; 36 m3/h → 23,5 m; 42 m3/h → 21 m; 48 m3/h → 18 m; 54 m3/h → 14 m; 57 m3/h → 11 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2 1/2; Pressure side DN2 G 2 1/2
Dimensions: a 172 mm; b 50 mm; fM 595 mm; g1 12 mm; h1 293 mm; h2 75 mm; HD 270 mm; l1 115 mm; l2 121 mm; m1 125 mm; m2 95 mm; n1 240 mm; n2 190 mm; n3 47 mm; s 16 mm; w 324 mm
Article weight: 63,2 kg
Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: BB

SKU:: 61F01643000
Shipping weight:: 82.16 kg
Item weight:: 63.20 kg

4.110,58 € *

Available

Delivery time: ca. 3 weeks

BA 65-150B/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 3 kW / 4 HP
Rated current: 11,5 A at 230 V / 6,6 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 54 m3/h
Maximum pump head according to the characteristic curve: 22,8 m
Characteristic curve Q/H: 0 m3/h → 22,8 m; 15 m3/h → 21,5 m; 18 m3/h → 21 m; 24 m3/h → 19,5 m; 30 m3/h → 17,5 m; 33 m3/h → 16,5 m; 36 m3/h → 15,5 m; 42 m3/h → 12,5 m; 48 m3/h → 9,5 m; 54 m3/h → 6,5 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2 1/2; Pressure side DN2 G 2 1/2
Dimensions: a 172 mm; b 50 mm; fM 595 mm; g1 12 mm; h1 293 mm; h2 75 mm; HD 270 mm; l1 115 mm; l2 121 mm; m1 125 mm; m2 95 mm; n1 240 mm; n2 190 mm; n3 47 mm; s 16 mm; w 324 mm
Article weight: 58,6 kg
Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 61F01582000
Shipping weight:: 76.18 kg
Item weight:: 58.60 kg

4.063,60 € *

Available

Delivery time: ca. 3 weeks

BA 65-150C/B self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 2,2 kW / 3 HP
Rated current: 11,5 A at 230 V / 6,6 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 48 m3/h
Maximum pump head according to the characteristic curve: 18,8 m
Characteristic curve Q/H: 0 m3/h → 18,8 m; 15 m3/h → 17,5 m; 18 m3/h → 17 m; 24 m3/h → 16 m; 30 m3/h → 14 m; 33 m3/h → 13 m; 36 m3/h → 11,5 m; 42 m3/h → 9 m; 48 m3/h → 6,5 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 2 1/2; Pressure side DN2 G 2 1/2
Dimensions: a 172 mm; b 50 mm; fM 583 mm; g1 12 mm; h1 293 mm; h2 75 mm; HD 260 mm; l1 115 mm; l2 121 mm; m1 125 mm; m2 95 mm; n1 240 mm; n2 190 mm; n3 47 mm; s 16 mm; w 319 mm
Article weight: 52,5 kg
Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: BB

SKU:: 61F01542000
Shipping weight:: 68.25 kg
Item weight:: 52.50 kg

3.907,26 € *

Available

Delivery time: ca. 3 weeks

BA 80-170A/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 400 V / 690 V ±10 %, 50 Hz
Engine rated power P2: 7,5 kW / 10 HP
Rated current: 14,3 A at 400 V / 8,3 A at 690 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 66 m3/h
Maximum pump head according to the characteristic curve: 35 m
Characteristic curve Q/H: 0 m3/h → 35 m; 15 m3/h → 33,6 m; 18 m3/h → 33,2 m; 21 m3/h → 32,9 m; 24 m3/h → 32,5 m; 30 m3/h → 31,6 m; 36 m3/h → 30,5 m; 45 m3/h → 28,1 m; 54 m3/h → 25,3 m; 60 m3/h → 23,2 m; 66 m3/h → 20,4 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 3; Pressure side DN2 G 3
Dimensions: a 202 mm; b 60 mm; fM 694 mm; g1 16 mm; h1 342 mm; h2 85 mm; HD 327 mm; l1 132 mm; l2 140 mm; m1 145 mm; m2 110 mm; n1 280 mm; n2 220 mm; n3 49 mm; s 18 mm; w 366 mm
Article weight: 95,1 kg
Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 61F02042000
Shipping weight:: 123.63 kg
Item weight:: 95.10 kg

7.525,33 € *

Available

Delivery time: ca. 3 weeks

BA 80-170B/A self-priming centrifugal pump with open impeller

Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
Engine: 2-poleer three-phase induction motor
Rated voltage: 400 V / 690 V ±10 %, 50 Hz
Engine rated power P2: 5,5 kW / 7,5 HP
Rated current: 10,8 A at 400 V / 6,2 A at 690 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 66 m3/h
Maximum pump head according to the characteristic curve: 28 m
Characteristic curve Q/H: 0 m3/h → 28 m; 15 m3/h → 27,3 m; 18 m3/h → 27,3 m; 21 m3/h → 27 m; 24 m3/h → 26,8 m; 30 m3/h → 25,7 m; 36 m3/h → 24,4 m; 45 m3/h → 22,1 m; 54 m3/h → 19 m; 60 m3/h → 16,7 m; 66 m3/h → 13,7 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
Connections according to ISO 228: suction side DN1 G 3; Pressure side DN2 G 3
Dimensions: a 202 mm; b 60 mm; fM 694 mm; g1 16 mm; h1 342 mm; h2 85 mm; HD 327 mm; l1 132 mm; l2 140 mm; m1 145 mm; m2 110 mm; n1 280 mm; n2 220 mm; n3 49 mm; s 18 mm; w 366 mm
Article weight: 89,9 kg
Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 61F02022000
Shipping weight:: 116.87 kg
Item weight:: 89.90 kg

7.303,39 € *

Available

Delivery time: ca. 3 weeks

BCA 60E self-priming liquid ring pump

Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 0,15 kW / 0,2 HP
Rated current: 1,7 A at 230 V / 1 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE2
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 0,75 m3/h
Maximum pump head according to the characteristic curve: 21,2 m
Characteristic curve Q/H: 0 m3/h → 21,2 m; 0,12 m3/h → 20 m; 0,24 m3/h → 18 m; 0,38 m3/h → 15,5 m; 0,48 m3/h → 13 m; 0,6 m3/h → 10,5 m; 0,75 m3/h → 6,5 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Suction height: to 9 m
Maximum permissible working pressure: 6 bar
Connections according to ISO 228: suction side DN1 G 1/2; Printing side DN2 G 1/2
Dimensions: a 59 mm; A 100 mm; a1 18 mm; AA 22 mm; AB 122 mm; B 80 mm; BB 96 mm; fM 256 mm; H 63 mm; h1 103 mm; h2 25 mm; HA 8 mm; HD 158 mm; K 7 mm; l5 14 mm; w 103 mm
Article weight: 6,2 kg
Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier

SKU:: 71820011000
Shipping weight:: 8.06 kg
Item weight:: 6.20 kg

741,85 € *

Available

Delivery time: ca. 3 weeks

BCA 80/A self-priming liquid ring pump

Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 0,45 kW / 0,6 HP
Rated current: 2,3 A at 230 V / 1,3 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE2
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 1,89 m3/h
Maximum pump head according to the characteristic curve: 38 m
Characteristic curve Q/H: 0 m3/h → 38 m; 0,38 m3/h → 36 m; 0,48 m3/h → 35 m; 0,6 m3/h → 33,5 m; 0,75 m3/h → 31,5 m; 1 m3/h → 29 m; 1,2 m3/h → 26 m; 1,5 m3/h → 22 m; 1,89 m3/h → 15 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Suction height: to 9 m
Maximum permissible working pressure: 6 bar
Connections according to ISO 228: suction side DN1 G 3/4; Printing side DN2 G 3/4
Dimensions: a 72 mm; A 112 mm; a1 23 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 307 mm; H 71 mm; h1 134 mm; h2 27 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 17 mm; w 122 mm
Article weight: 9 kg
Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 71810020000
Shipping weight:: 11.70 kg
Item weight:: 9.00 kg

847,38 € *

Available

Delivery time: ca. 3 weeks

BCA 90/A self-priming liquid ring pump

Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 0,55 kW / 0,75 HP
Rated current: 3 A at 230 V / 1,7 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE2
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 2,4 m3/h
Maximum pump head according to the characteristic curve: 47 m
Characteristic curve Q/H: 0 m3/h → 47 m; 0,48 m3/h → 42 m; 0,6 m3/h → 41 m; 0,75 m3/h → 40 m; 1 m3/h → 37 m; 1,2 m3/h → 34 m; 1,5 m3/h → 30 m; 1,89 m3/h → 25 m; 2,4 m3/h → 17 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Suction height: to 9 m
Maximum permissible working pressure: 6 bar
Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
Dimensions: a 84 mm; A 112 mm; a1 28 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 318 mm; H 71 mm; h1 142 mm; h2 41 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 21 mm; w 128 mm
Article weight: 10,9 kg
Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: A

SKU:: 71810030000
Shipping weight:: 14.17 kg
Item weight:: 10.90 kg

957,78 € *

Available

Delivery time: ca. 3 weeks

BCA 91/B self-priming liquid ring pump

Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
Design: Bronze version with pump housing and bronze lantern CC480K
Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
Engine: 2-poleer three-phase induction motor
Rated voltage: 230 V / 400 V ±10 %, 50 Hz
Engine rated power P2: 0,75 kW / 1 HP
Rated current: 3,7 A at 230 V / 2,2 A at 400 V
Rated speed: 2900 min-1
Efficiency class: IE3
Degree of protection: IP54
Insulation class: F
Operation mode: Continuous operation
Flow according to characteristic curve: to 2,4 m3/h
Maximum pump head according to the characteristic curve: 60 m
Characteristic curve Q/H: 0 m3/h → 60 m; 0,48 m3/h → 53 m; 0,6 m3/h → 51 m; 0,75 m3/h → 48 m; 1 m3/h → 44 m; 1,2 m3/h → 39 m; 1,5 m3/h → 34 m; 1,89 m3/h → 26,5 m; 2,4 m3/h → 17 m3/h
Media temperature: -10 to +90 °C
Maximum ambient temperature: to 40 °C
Suction height: to 9 m
Maximum permissible working pressure: 6 bar
Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
Dimensions: a 84 mm; A 112 mm; a1 28 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 318 mm; H 71 mm; h1 142 mm; h2 41 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 21 mm; w 128 mm
Article weight: 12,9 kg
Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
Revision: BB

SKU:: 71810041000
Shipping weight:: 16.77 kg
Item weight:: 12.90 kg

1.049,92 € *

Available

Delivery time: ca. 3 weeks

Items 1 - 30 of 111