Skip to main content Skip to search Skip to navigation

Self-priming pumps

This category includes Calpeda self-priming pumps for water supply, well water extraction, pressure boosting, irrigation, drainage and a wide range of domestic, commercial and industrial applications.

The range covers different pump technologies – from self-priming jet pumps and liquid ring pumps to centrifugal pumps with open impellers and horizontal multistage self-priming centrifugal pumps. This allows different requirements for flow rate, head, pumped liquid, materials and supply voltage to be matched to the application.

  • Self-priming pumps for wells, water supply and pressure boosting
  • Jet pumps with built-in ejector
  • Multistage self-priming centrifugal pumps for higher delivery heads
  • Liquid ring pumps for applications involving air or gas in the pumped liquid
  • Open-impeller centrifugal pumps for clean or slightly dirty water
  • Cast-iron, bronze and stainless-steel versions
  • Single-phase and three-phase motor versions available

This category includes the Calpeda A, CA, MXA, NG, NGL and NGX series. When selecting the appropriate pump, the required flow rate, delivery head, suction lift, pumped liquid, material, connection size and supply voltage should be considered.

Standard Item name from A to Z Item name from Z to A Price in ascending order Price in descending order Weight SKU Release date Newest first GTIN Bestsellers
10 20 30 40 50
Items 1 - 20 of 54
Application: Water supply Reset all filters
BCA 60E self-priming liquid ring pump
BCA 60E self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,15 kW / 0,2 HP
  • Rated current: 1,7 A at 230 V / 1 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 0,75 m3/h
  • Maximum pump head according to the characteristic curve: 21,2 m
  • Characteristic curve Q/H: 0 m3/h → 21,2 m; 0,12 m3/h → 20 m; 0,24 m3/h → 18 m; 0,38 m3/h → 15,5 m; 0,48 m3/h → 13 m; 0,6 m3/h → 10,5 m; 0,75 m3/h → 6,5 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1/2; Printing side DN2 G 1/2
  • Dimensions: a 59 mm; A 100 mm; a1 18 mm; AA 22 mm; AB 122 mm; B 80 mm; BB 96 mm; fM 256 mm; H 63 mm; h1 103 mm; h2 25 mm; HA 8 mm; HD 158 mm; K 7 mm; l5 14 mm; w 103 mm
  • Article weight: 6,2 kg
  • Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
SKU:
71820011000
Shipping weight:
8.06 kg
Item weight:
6.20 kg
741,85 € *
Available
Delivery time: ca. 3 weeks
BCA 80/A self-priming liquid ring pump
BCA 80/A self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,45 kW / 0,6 HP
  • Rated current: 2,3 A at 230 V / 1,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 1,89 m3/h
  • Maximum pump head according to the characteristic curve: 38 m
  • Characteristic curve Q/H: 0 m3/h → 38 m; 0,38 m3/h → 36 m; 0,48 m3/h → 35 m; 0,6 m3/h → 33,5 m; 0,75 m3/h → 31,5 m; 1 m3/h → 29 m; 1,2 m3/h → 26 m; 1,5 m3/h → 22 m; 1,89 m3/h → 15 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 3/4; Printing side DN2 G 3/4
  • Dimensions: a 72 mm; A 112 mm; a1 23 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 307 mm; H 71 mm; h1 134 mm; h2 27 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 17 mm; w 122 mm
  • Article weight: 9 kg
  • Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
71810020000
Shipping weight:
11.70 kg
Item weight:
9.00 kg
847,38 € *
Available
Delivery time: ca. 3 weeks
BCA 90/A self-priming liquid ring pump
BCA 90/A self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,55 kW / 0,75 HP
  • Rated current: 3 A at 230 V / 1,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 2,4 m3/h
  • Maximum pump head according to the characteristic curve: 47 m
  • Characteristic curve Q/H: 0 m3/h → 47 m; 0,48 m3/h → 42 m; 0,6 m3/h → 41 m; 0,75 m3/h → 40 m; 1 m3/h → 37 m; 1,2 m3/h → 34 m; 1,5 m3/h → 30 m; 1,89 m3/h → 25 m; 2,4 m3/h → 17 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 84 mm; A 112 mm; a1 28 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 318 mm; H 71 mm; h1 142 mm; h2 41 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 21 mm; w 128 mm
  • Article weight: 10,9 kg
  • Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
71810030000
Shipping weight:
14.17 kg
Item weight:
10.90 kg
957,78 € *
Available
Delivery time: ca. 3 weeks
BCA 91/B self-priming liquid ring pump
BCA 91/B self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,75 kW / 1 HP
  • Rated current: 3,7 A at 230 V / 2,2 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 2,4 m3/h
  • Maximum pump head according to the characteristic curve: 60 m
  • Characteristic curve Q/H: 0 m3/h → 60 m; 0,48 m3/h → 53 m; 0,6 m3/h → 51 m; 0,75 m3/h → 48 m; 1 m3/h → 44 m; 1,2 m3/h → 39 m; 1,5 m3/h → 34 m; 1,89 m3/h → 26,5 m; 2,4 m3/h → 17 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 84 mm; A 112 mm; a1 28 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 318 mm; H 71 mm; h1 142 mm; h2 41 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 21 mm; w 128 mm
  • Article weight: 12,9 kg
  • Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: BB
SKU:
71810041000
Shipping weight:
16.77 kg
Item weight:
12.90 kg
1.049,92 € *
Available
Delivery time: ca. 3 weeks
BCAM 60E self-priming liquid ring pump
BCAM 60E self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer single-phase induction motor with thermal protection
  • Rated voltage: 230 V ±10 %, 50 Hz
  • Engine rated power P2: 0,15 kW / 0,2 HP
  • Maximum power consumption P1: 0,29 kW
  • Rated current: 1,6 A at 230 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 0,75 m3/h
  • Maximum pump head according to the characteristic curve: 21,2 m
  • Characteristic curve Q/H: 0 m3/h → 21,2 m; 0,12 m3/h → 20 m; 0,24 m3/h → 18 m; 0,38 m3/h → 15,5 m; 0,48 m3/h → 13 m; 0,6 m3/h → 10,5 m; 0,75 m3/h → 6,5 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1/2; Printing side DN2 G 1/2
  • Dimensions: a 59 mm; A 100 mm; a1 18 mm; AA 22 mm; AB 122 mm; B 80 mm; BB 96 mm; fM 256 mm; H 63 mm; h1 103 mm; h2 25 mm; HA 8 mm; HD 158 mm; K 7 mm; l5 14 mm; w 103 mm
  • Article weight: 6,3 kg
  • Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
SKU:
71920011000
Shipping weight:
8.19 kg
Item weight:
6.30 kg
741,85 € *
Available
Delivery time: ca. 3 weeks
BCAM 80/A self-priming liquid ring pump
BCAM 80/A self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer single-phase induction motor with thermal protection
  • Rated voltage: 230 V ±10 %, 50 Hz
  • Engine rated power P2: 0,45 kW / 0,6 HP
  • Maximum power consumption P1: 0,67 kW
  • Rated current: 3,6 A at 230 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 1,89 m3/h
  • Maximum pump head according to the characteristic curve: 38 m
  • Characteristic curve Q/H: 0 m3/h → 38 m; 0,38 m3/h → 36 m; 0,48 m3/h → 35 m; 0,6 m3/h → 33,5 m; 0,75 m3/h → 31,5 m; 1 m3/h → 29 m; 1,2 m3/h → 26 m; 1,5 m3/h → 22 m; 1,89 m3/h → 15 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 3/4; Printing side DN2 G 3/4
  • Dimensions: a 72 mm; A 112 mm; a1 23 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 307 mm; H 71 mm; h1 134 mm; h2 27 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 17 mm; w 122 mm
  • Article weight: 9,7 kg
  • Materials: Pump housing and lantern bronze CC480K; Brass impeller CW617N; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
71910020000
Shipping weight:
12.61 kg
Item weight:
9.70 kg
864,00 € *
Available
Delivery time: ca. 3 weeks
BNG 3/A self-priming jet pump with built-in ejector
BNG 3/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,55 kW / 0,75 HP
  • Rated current: 3 A at 230 V / 1,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 3 m3/h
  • Maximum pump head according to the characteristic curve: 52,1 m
  • Characteristic curve Q/H: 0 m3/h → 52,1 m; 0,25 m3/h → 49 m; 0,5 m3/h → 45,5 m; 1 m3/h → 40 m; 1,5 m3/h → 36 m; 2 m3/h → 32 m; 2,5 m3/h → 28 m; 3 m3/h → 24 m
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 127 mm; a1 8 mm; b 35 mm; fM 430 mm; g1 11 mm; h1 150 mm; h2 43 mm; HD 207 mm; m1 60 mm; m3 8 mm; n1 185 mm; n2 155 mm; s 9.5 mm; w 100 mm
  • Article weight: 20,6 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
71A40030000
Shipping weight:
26.78 kg
Item weight:
20.60 kg
1.517,63 € *
Available
Delivery time: ca. 3 weeks
BNG 5/16/A self-priming jet pump with built-in ejector
BNG 5/16/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,1 kW / 1,5 HP
  • Rated current: 4,6 A at 230 V / 2,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 4,5 m3/h
  • Maximum pump head according to the characteristic curve: 64 m
  • Characteristic curve Q/H: 0 m3/h → 64 m; 0,5 m3/h → 59 m; 1 m3/h → 54 m; 1,5 m3/h → 50 m; 2 m3/h → 46 m; 2,5 m3/h → 43 m; 3 m3/h → 40 m; 3,5 m3/h → 37 m; 4 m3/h → 34,5 m; 4,5 m3/h → 32 m3/h
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 32,1 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
71A00041200
Shipping weight:
41.73 kg
Item weight:
32.10 kg
2.119,41 € *
Available
Delivery time: ca. 3 weeks
BNG 5/18/A self-priming jet pump with built-in ejector
BNG 5/18/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,1 kW / 1,5 HP
  • Rated current: 4,6 A at 230 V / 2,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 6 m3/h
  • Maximum pump head according to the characteristic curve: 53 m
  • Characteristic curve Q/H: 0 m3/h → 53 m; 0,5 m3/h → 48,5 m; 1 m3/h → 46 m; 1,5 m3/h → 43,5 m; 2 m3/h → 41,5 m; 2,5 m3/h → 39,5 m; 3 m3/h → 38 m; 3,5 m3/h → 35,5 m; 4 m3/h → 34 m; 4,5 m3/h → 32 m; 5 m3/h → 30,5 m; 5,5 m3/h → 29 m; 6 m3/h → 28 m
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 32,1 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
71A00042300
Shipping weight:
41.73 kg
Item weight:
32.10 kg
2.119,41 € *
Available
Delivery time: ca. 3 weeks
BNG 5/22/A self-priming jet pump with built-in ejector
BNG 5/22/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,1 kW / 1,5 HP
  • Rated current: 4,6 A at 230 V / 2,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 9,5 m3/h
  • Maximum pump head according to the characteristic curve: 36,5 m
  • Characteristic curve Q/H: 0 m3/h → 36,5 m; 0,5 m3/h → 35,5 m; 1 m3/h → 34,5 m; 1,5 m3/h → 33 m; 2 m3/h → 31,5 m; 2,5 m3/h → 30,5 m; 3 m3/h → 29,5 m; 3,5 m3/h → 28 m; 4 m3/h → 27 m; 4,5 m3/h → 26 m; 5 m3/h → 25 m; 5,5 m3/h → 23,5 m; 6 m3/h → 23 m; 6,5 m3/h → 21,5 m; 7 m3/h → 20,5 m; 8 m3/h → 18,5 m; 9 m3/h → 16,5 m; 9,5 m3/h → 15,5 m3/h
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 32,1 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
71A00043200
Shipping weight:
41.73 kg
Item weight:
32.10 kg
2.119,41 € *
Available
Delivery time: ca. 3 weeks
BNG 6/18/A self-priming jet pump with built-in ejector
BNG 6/18/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,5 kW / 2 HP
  • Rated current: 7,5 A at 230 V / 4,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 6 m3/h
  • Maximum pump head according to the characteristic curve: 67,3 m
  • Characteristic curve Q/H: 0 m3/h → 67,3 m; 0,5 m3/h → 64,5 m; 1 m3/h → 62 m; 1,5 m3/h → 59 m; 2 m3/h → 56 m; 2,5 m3/h → 54 m; 3 m3/h → 51 m; 3,5 m3/h → 48,5 m; 4 m3/h → 46 m; 4,5 m3/h → 43,5 m; 5 m3/h → 41,5 m; 5,5 m3/h → 39 m; 6 m3/h → 36,5 m
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 33,4 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
71A00044200
Shipping weight:
43.42 kg
Item weight:
33.40 kg
2.247,56 € *
Available
Delivery time: ca. 3 weeks
BNG 6/22/A self-priming jet pump with built-in ejector
BNG 6/22/A self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 1,5 kW / 2 HP
  • Rated current: 7,5 A at 230 V / 4,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 9,5 m3/h
  • Maximum pump head according to the characteristic curve: 53 m
  • Characteristic curve Q/H: 0 m3/h → 53 m; 0,5 m3/h → 51,5 m; 1 m3/h → 50 m; 1,5 m3/h → 48,5 m; 2 m3/h → 47 m; 2,5 m3/h → 46 m; 3 m3/h → 44,5 m; 3,5 m3/h → 43 m; 4 m3/h → 41,5 m; 4,5 m3/h → 40 m; 5 m3/h → 39 m; 5,5 m3/h → 37,5 m; 6 m3/h → 36,5 m; 6,5 m3/h → 35 m; 7 m3/h → 33,5 m; 8 m3/h → 31 m; 9 m3/h → 28,5 m; 9,5 m3/h → 27 m3/h
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 33,4 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: A
SKU:
71A00045200
Shipping weight:
43.42 kg
Item weight:
33.40 kg
2.247,56 € *
Available
Delivery time: ca. 3 weeks
BNG 7/16/B self-priming jet pump with built-in ejector
BNG 7/16/B self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 2,2 kW / 3 HP
  • Rated current: 9,2 A at 230 V / 5,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: up to 4 m3/h
  • Maximum pump head according to the characteristic curve: 95 m
  • Characteristic curve Q/H: 0 m3/h → 95 m; 0,5 m3/h → 89 m; 1 m3/h → 83 m; 1,5 m3/h → 77 m; 2 m3/h → 72 m; 2,5 m3/h → 67 m; 3 m3/h → 62 m; 3,5 m3/h → 58 m; 4 m3/h → 54 m
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 600 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm; w1 233 mm
  • Article weight: 36,6 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: BB
SKU:
71A00048300
Shipping weight:
47.58 kg
Item weight:
36.60 kg
2.344,39 € *
Available
Delivery time: ca. 3 weeks
BNG 7/18/B self-priming jet pump with built-in ejector
BNG 7/18/B self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 2,2 kW / 3 HP
  • Rated current: 9,2 A at 230 V / 5,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 6,5 m3/h
  • Maximum pump head according to the characteristic curve: 77 m
  • Characteristic curve Q/H: 0 m3/h → 77 m; 0,5 m3/h → 74,5 m; 1 m3/h → 71,5 m; 1,5 m3/h → 68,5 m; 2 m3/h → 65,5 m; 2,5 m3/h → 63 m; 3 m3/h → 60 m; 3,5 m3/h → 57,5 m; 4 m3/h → 55 m; 4,5 m3/h → 53 m; 5 m3/h → 51 m; 5,5 m3/h → 49 m; 6 m3/h → 47 m; 6,5 m3/h → 45 m3/h
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 600 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm; w1 233 mm
  • Article weight: 36,6 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: BB
SKU:
71A00046300
Shipping weight:
47.58 kg
Item weight:
36.60 kg
2.344,39 € *
Available
Delivery time: ca. 3 weeks
BNG 7/22/B self-priming jet pump with built-in ejector
BNG 7/22/B self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 2,2 kW / 3 HP
  • Rated current: 9,2 A at 230 V / 5,3 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE3
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 9,5 m3/h
  • Maximum pump head according to the characteristic curve: 60 m
  • Characteristic curve Q/H: 0 m3/h → 60 m; 0,5 m3/h → 59 m; 1 m3/h → 57,5 m; 1,5 m3/h → 56,5 m; 2 m3/h → 55 m; 2,5 m3/h → 54 m; 3 m3/h → 52,5 m; 3,5 m3/h → 51 m; 4 m3/h → 50 m; 4,5 m3/h → 48,5 m; 5 m3/h → 47 m; 5,5 m3/h → 45,5 m; 6 m3/h → 44 m; 6,5 m3/h → 42,5 m; 7 m3/h → 41,5 m; 8 m3/h → 38 m; 9 m3/h → 35 m; 9,5 m3/h → 34 m3/h
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 600 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm; w1 233 mm
  • Article weight: 36,6 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
  • Revision: BB
SKU:
71A00047300
Shipping weight:
47.58 kg
Item weight:
36.60 kg
2.344,39 € *
Available
Delivery time: ca. 3 weeks
BNGM 6/18E self-priming jet pump with built-in ejector
BNGM 6/18E self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer single-phase induction motor with thermal protection
  • Rated voltage: 230 V ±10 %, 50 Hz
  • Engine rated power P2: 1,5 kW / 2 HP
  • Maximum power consumption P1: 2 kW
  • Rated current: 9,2 A at 230 V
  • Rated speed: 2900 min-1
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: S3 60 %
  • Flow according to characteristic curve: up to 6 m3/h
  • Maximum pump head according to the characteristic curve: 61,8 m
  • Characteristic curve Q/H: 0 m3/h → 61,8 m; 0,5 m3/h → 59 m; 1 m3/h → 57 m; 1,5 m3/h → 54 m; 2 m3/h → 51 m; 2,5 m3/h → 48 m; 3 m3/h → 45 m; 3,5 m3/h → 43 m; 4 m3/h → 40 m; 4,5 m3/h → 37,5 m; 5 m3/h → 35 m; 5,5 m3/h → 33 m; 6 m3/h → 30 m
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 34 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
SKU:
71B00044100
Shipping weight:
44.20 kg
Item weight:
34.00 kg
2.403,72 € *
Available
Delivery time: ca. 3 weeks
BNGM 6/22E self-priming jet pump with built-in ejector
BNGM 6/22E self-priming jet pump with built-in ejector
  • Construction: Self-priming flat well jet pump in block construction with built-in ejector
  • Design: Bronze version with pump housing and bronze lantern CC480K
  • Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
  • Engine: 2-poleer single-phase induction motor with thermal protection
  • Rated voltage: 230 V ±10 %, 50 Hz
  • Engine rated power P2: 1,5 kW / 2 HP
  • Maximum power consumption P1: 2 kW
  • Rated current: 9,2 A at 230 V
  • Rated speed: 2900 min-1
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: S3 60 %
  • Flow according to characteristic curve: to 9,5 m3/h
  • Maximum pump head according to the characteristic curve: 48,5 m
  • Characteristic curve Q/H: 0 m3/h → 48,5 m; 0,5 m3/h → 47 m; 1 m3/h → 45 m; 1,5 m3/h → 43,5 m; 2 m3/h → 42 m; 2,5 m3/h → 41 m; 3 m3/h → 40 m; 3,5 m3/h → 38 m; 4 m3/h → 37 m; 4,5 m3/h → 36 m; 5 m3/h → 35 m; 5,5 m3/h → 33 m; 6 m3/h → 32 m; 6,5 m3/h → 31 m; 7 m3/h → 30 m; 8 m3/h → 27 m; 9 m3/h → 24 m; 9,5 m3/h → 23 m3/h
  • Media temperature: to +40 °C
  • Maximum ambient temperature: to 40 °C
  • Maximum permissible working pressure: 10 bar
  • Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
  • Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 560 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm
  • Article weight: 34 kg
  • Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
SKU:
71B00045100
Shipping weight:
44.20 kg
Item weight:
34.00 kg
2.403,72 € *
Available
Delivery time: ca. 3 weeks
CA 60E self-priming liquid ring pump
CA 60E self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,15 kW / 0,2 HP
  • Rated current: 1,7 A at 230 V / 1 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 0,75 m3/h
  • Maximum pump head according to the characteristic curve: 21,2 m
  • Characteristic curve Q/H: 0 m3/h → 21,2 m; 0,12 m3/h → 20 m; 0,24 m3/h → 18 m; 0,38 m3/h → 15,5 m; 0,48 m3/h → 13 m; 0,6 m3/h → 10,5 m; 0,75 m3/h → 6,5 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1/2; Printing side DN2 G 1/2
  • Dimensions: a 59 mm; A 100 mm; a1 18 mm; AA 22 mm; AB 122 mm; B 80 mm; BB 96 mm; fM 256 mm; H 63 mm; h1 103 mm; h2 25 mm; HA 8 mm; HD 158 mm; K 7 mm; l5 14 mm; w 103 mm
  • Article weight: 5,8 kg
  • Materials: pump housing and lantern GJL 200; Brass impeller CW617N; shaft AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
SKU:
70820011000
Shipping weight:
7.54 kg
Item weight:
5.80 kg
399,16 € *
Available
Delivery time: ca. 3 weeks
CA 80E self-priming liquid ring pump
CA 80E self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,45 kW / 0,6 HP
  • Rated current: 2,8 A at 230 V / 1,6 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 1,89 m3/h
  • Maximum pump head according to the characteristic curve: 38 m
  • Characteristic curve Q/H: 0 m3/h → 38 m; 0,38 m3/h → 36 m; 0,48 m3/h → 35 m; 0,6 m3/h → 33,5 m; 0,75 m3/h → 31,5 m; 1 m3/h → 29 m; 1,2 m3/h → 26 m; 1,5 m3/h → 22 m; 1,89 m3/h → 15 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 3/4; Printing side DN2 G 3/4
  • Dimensions: a 72 mm; A 100 mm; a1 23 mm; AA 22 mm; AB 122 mm; B 80 mm; BB 96 mm; fM 272 mm; H 63 mm; h1 126 mm; h2 27 mm; HA 8 mm; HD 158 mm; K 7 mm; l5 17 mm; w 109 mm
  • Article weight: 7,5 kg
  • Materials: pump housing and lantern GJL 200; Brass impeller CW617N; shaft AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
SKU:
70820020000
Shipping weight:
9.75 kg
Item weight:
7.50 kg
430,39 € *
Available
Delivery time: ca. 3 weeks
CA 90/A self-priming liquid ring pump
CA 90/A self-priming liquid ring pump
  • Construction: self-priming liquid ring pump of block construction with a star-shaped impeller; CA 80, 90 and 91 with anti-lock intermediate ring
  • Design: Cast iron version with pump housing and lantern from GJL 200
  • Applications: For clean, non-abrasive and non-aggressive liquids without suspended solids; especially in the case of air or gas, unstable inlet, well removal and pressure increase
  • Engine: 2-poleer three-phase induction motor
  • Rated voltage: 230 V / 400 V ±10 %, 50 Hz
  • Engine rated power P2: 0,55 kW / 0,75 HP
  • Rated current: 3 A at 230 V / 1,7 A at 400 V
  • Rated speed: 2900 min-1
  • Efficiency class: IE2
  • Degree of protection: IP54
  • Insulation class: F
  • Operation mode: Continuous operation
  • Flow according to characteristic curve: to 2,4 m3/h
  • Maximum pump head according to the characteristic curve: 47 m
  • Characteristic curve Q/H: 0 m3/h → 47 m; 0,48 m3/h → 42 m; 0,6 m3/h → 41 m; 0,75 m3/h → 40 m; 1 m3/h → 37 m; 1,2 m3/h → 34 m; 1,5 m3/h → 30 m; 1,89 m3/h → 25 m; 2,4 m3/h → 17 m3/h
  • Media temperature: -10 to +90 °C
  • Maximum ambient temperature: to 40 °C
  • Suction height: to 9 m
  • Maximum permissible working pressure: 6 bar
  • Connections according to ISO 228: suction side DN1 G 1; Pressure side DN2 G 1
  • Dimensions: a 84 mm; A 112 mm; a1 28 mm; AA 22 mm; AB 134 mm; B 90 mm; BB 106 mm; fM 318 mm; H 71 mm; h1 142 mm; h2 41 mm; HA 10 mm; HD 182 mm; K 7 mm; l5 21 mm; w 128 mm
  • Article weight: 10 kg
  • Materials: pump housing and lantern GJL 200; Brass impeller CW617N; shaft AISI 430F; Slip ring seal carbon/ceramic/NBR
  • Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
  • Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
  • Revision: A
SKU:
70820030000
Shipping weight:
13.00 kg
Item weight:
10.00 kg
481,28 € *
Available
Delivery time: ca. 3 weeks
Items 1 - 20 of 54