Robots and Controllers
Compact OVR robots for handling, assembly and pick-and-place. The table summarizes the main differences between configurations.
| OVR | Axes | Maximum reach | Payload | Product mass |
|---|---|---|---|---|
| OVR3041K3-H | 3 | 410 mm | 3 kg | 7.6 kg |
| OVR3046K10-H | 3 | 460 mm | 10 kg | 8.3 kg |
| OVR3070K3-H | 3 | 700 mm | 3 kg | 8.9 kg |
| OVR4048K5-V | 4 | 480 mm | 5 kg | 16 kg |
| OVR4068K5-V | 4 | 680 mm | 5 kg | 17 kg |
| OVR4088K5-V | 4 | 880 mm | 5 kg | 18 kg |
| OVR5035K1-V | 5 | 350 mm | 1 kg | 12.5 kg |
| OVR5048K1-V | 5 | 480 mm | 1 kg | 11.5 kg |
| OVR6048K1-V | 6 | 480 mm | 1 kg | 12.5 kg |
| OVR3AL030030Z10K-C | 3 | 300 × 300 × 100 mm | 2.5 kg | 18.4 kg |
| OVR3AR030030Z10K-C | 3 | 300 × 300 × 100 mm | 2.5 kg | 18.4 kg |
Matching controller: MRCU3AK / MRCU4AK / MRCU5AK / MRCU6AK with integrated drivers. Robot, controller and accessories are separate items. Select motor and power cables, DC supply and end effector for the application. Price and lead time on request.
OVR5048K1-V / OVR6048K1-V: Usable workspace depends on tool orientation. Horizontal reach with the tool pointing down: 480 mm; outer mechanical reach: 569 mm. Refer to the dimension and workspace drawings.
- Controller Type: Robot Controller
- Host Network Type: EtherNet/IP
- Interface Control Input: 8 points, Photocoupler
- Interface Control Output: 8 points, Photocoupler, Open collector
- RS-485 Communication Specifications Electrical Characteristic: Modbus RTU
Use EIA-485 compliant, straight cable Twisted-pair wire (TIA/EIA-568B CAT5e or higher recommended), with a total extension distance of up to 50 m. ∗1 - USB connector Specifications: USB2.0 (Full Speed)
- USB connector connector cable: Length: 3 m max.
Configuration: A to mini B - Setting Tool: Programming Software MRC Studio
- Number of Control Axes: Maximum 8 Axes ∗2
- Robot Model: Horizontally Articulated (2-link, 3-link), Vertical Articulated (3–6 Axes), Palletizer (1-link Mechanism, 2-link Mechanism), Parallel Link, Polar and cylindrical coordinates, Orthogonal (2-axis, 3-axis), Cartesian-Planar Surface Gantry (2-axis, 3-axis)
- Drive command: P to P, Linear Interpolation, Circular Interpolation, Arch Interpolation, Pallet (P to P, Linear, Arch)
- Monitor: Robot graphics, alarms, information, etc.
- Power Supply Input Voltage: 24 VDC ±10%
- Power Supply Input Current: 0.2 A
- Controller Type: Robot Controller
- Host Network Type: EtherNet/IP
- Interface Control Input: 8 points, Photocoupler
- Interface Control Output: 8 points, Photocoupler, Open collector
- RS-485 Communication Specifications Electrical Characteristic: Modbus RTU
Use EIA-485 compliant, straight cable Twisted-pair wire (TIA/EIA-568B CAT5e or higher recommended), with a total extension distance of up to 50 m. ∗1 - USB connector Specifications: USB2.0 (Full Speed)
- USB connector connector cable: Length: 3 m max.
Configuration: A to mini B - Setting Tool: Programming Software MRC Studio
- Number of Control Axes: Maximum 8 Axes ∗2
- Robot Model: Horizontally Articulated (2-link, 3-link), Vertical Articulated (3–6 Axes), Palletizer (1-link Mechanism, 2-link Mechanism), Parallel Link, Polar and cylindrical coordinates, Orthogonal (2-axis, 3-axis), Cartesian-Planar Surface Gantry (2-axis, 3-axis)
- Drive command: P to P, Linear Interpolation, Circular Interpolation, Arch Interpolation, Pallet (P to P, Linear, Arch)
- Monitor: Robot graphics, alarms, information, etc.
- Power Supply Input Voltage: 24 VDC ±10%
- Power Supply Input Current: 0.2 A
- Axes: 3 (max.)
- Input voltage: 24 VDC ±5% / 48 VDC ±5%
- Allowable operating voltage: 24 VDC: 20–32 VDC; 48 VDC: 40–55 VDC
- Maximum input current: 11 A
- Control supply / current: 24 VDC ±5%; 0.75 A (1.5 A)
- Allowable control voltage: 20–27.6 VDC (22.8–27.6 VDC)
- Network: EtherNet/IP
- Control inputs: 8 × Photocoupler
- Control outputs: 8 × Photocoupler / Open Collector
- USB: USB 2.0 Full Speed; A / Mini-B; max. 3 m
- Software: MRC Studio
- Degree of protection: IP10
- Product mass: 1.9 kg
- Motion commands: Point-to-point, linear, circular and arc interpolation, pallet function
- Monitor: Robot graphics, alarms, information
- Axes: 4 (max.)
- Input voltage: 24 VDC ±5% / 48 VDC ±5%
- Allowable operating voltage: 24 VDC: 20–32 VDC; 48 VDC: 40–55 VDC
- Maximum input current: 15 A
- Control supply / current: 24 VDC ±5%; 0.9 A (1.9 A)
- Allowable control voltage: 20–27.6 VDC (22.8–27.6 VDC)
- Network: EtherNet/IP
- Control inputs: 8 × Photocoupler
- Control outputs: 8 × Photocoupler / Open Collector
- USB: USB 2.0 Full Speed; A / Mini-B; max. 3 m
- Software: MRC Studio
- Degree of protection: IP10
- Product mass: 1.9 kg
- Motion commands: Point-to-point, linear, circular and arc interpolation, pallet function
- Monitor: Robot graphics, alarms, information
- Axes: 5 (max.)
- Input voltage: 24 VDC ±5% / 48 VDC ±5%
- Allowable operating voltage: 24 VDC: 20–32 VDC; 48 VDC: 40–55 VDC
- Maximum input current: 19 A
- Control supply / current: 24 VDC ±5%; 1.05 A (2.3 A)
- Allowable control voltage: 20–27.6 VDC (22.8–27.6 VDC)
- Network: EtherNet/IP
- Control inputs: 8 × Photocoupler
- Control outputs: 8 × Photocoupler / Open Collector
- USB: USB 2.0 Full Speed; A / Mini-B; max. 3 m
- Software: MRC Studio
- Degree of protection: IP10
- Product mass: 2 kg
- Motion commands: Point-to-point, linear, circular and arc interpolation, pallet function
- Monitor: Robot graphics, alarms, information
- Axes: 6 (max.)
- Input voltage: 24 VDC ±5% / 48 VDC ±5%
- Allowable operating voltage: 24 VDC: 20–32 VDC; 48 VDC: 40–55 VDC
- Maximum input current: 22 A
- Control supply / current: 24 VDC ±5%; 1.2 A (2.7 A)
- Allowable control voltage: 20–27.6 VDC (22.8–27.6 VDC)
- Network: EtherNet/IP
- Control inputs: 8 × Photocoupler
- Control outputs: 8 × Photocoupler / Open Collector
- USB: USB 2.0 Full Speed; A / Mini-B; max. 3 m
- Software: MRC Studio
- Degree of protection: IP10
- Product mass: 2 kg
- Motion commands: Point-to-point, linear, circular and arc interpolation, pallet function
- Monitor: Robot graphics, alarms, information
- Axes: 7 (max.)
- Input voltage: 24 VDC ±5% / 48 VDC ±5%
- Allowable operating voltage: 24 VDC: 20–32 VDC; 48 VDC: 40–55 VDC
- Maximum input current: 26 A
- Control supply / current: 24 VDC ±5%; 1.35 A (3.1 A)
- Allowable control voltage: 20–27.6 VDC (22.8–27.6 VDC)
- Network: EtherNet/IP
- Control inputs: 8 × Photocoupler
- Control outputs: 8 × Photocoupler / Open Collector
- USB: USB 2.0 Full Speed; A / Mini-B; max. 3 m
- Software: MRC Studio
- Degree of protection: IP10
- Product mass: 2 kg
- Motion commands: Point-to-point, linear, circular and arc interpolation, pallet function
- Monitor: Robot graphics, alarms, information
- Axes: 8 (max.)
- Input voltage: 24 VDC ±5% / 48 VDC ±5%
- Allowable operating voltage: 24 VDC: 20–32 VDC; 48 VDC: 40–55 VDC
- Maximum input current: 30 A
- Control supply / current: 24 VDC ±5%; 1.5 A (3.5 A)
- Allowable control voltage: 20–27.6 VDC (22.8–27.6 VDC)
- Network: EtherNet/IP
- Control inputs: 8 × Photocoupler
- Control outputs: 8 × Photocoupler / Open Collector
- USB: USB 2.0 Full Speed; A / Mini-B; max. 3 m
- Software: MRC Studio
- Degree of protection: IP10
- Product mass: 2.1 kg
- Motion commands: Point-to-point, linear, circular and arc interpolation, pallet function
- Monitor: Robot graphics, alarms, information