Protective circuit breakers
Items 1 - 10 of 14
- Driver Type: Simple type
- Power Supply Input Rated Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: ±10%
This product is a brushless motor driver only. A combination of motor and connection cable is required for driving.
Materials Resin Configuration DIN Rail Mounting Plate
|
Designation |
Value |
|---|---|
| Rated voltage Un Rated voltage Un |
230 VAC / 400 VAC 230 VAC / 400 VAC |
| Rated frequency | Rated frequency | 50 Hz | 50 Hz |
| Rated residual current IΔn Rated residual current IΔn |
0,03 A; 0,3 A 0.03 A; 0.3 A |
| Tripping times Tripping times |
1× IΔn ≤ 300 ms; 5× IΔn ≤ 40 ms 1× IΔn ≤ 300 ms; 5× IΔn ≤ 40 ms |
| Response delay Response delay |
10 ms 10 ms |
| Surge current withstand capability Surge current resistance |
3 kA 3 kA |
| Rated impulse withstand voltage Rated surge voltage resistance |
4 kA 4 kA |
| Supply side | Feeding-in side | any | any desired |
| Operating range of the test device Range for test function |
2-pole: 30 mA - 150 - 250 V | 2 pole: 30 mA - 150 - 250 V 4-pole: 30 mA - 250 - 440 V | 4 pole: 30 mA - 250 - 440 V 4-pole: 300 mA - 200 - 440 V | 4 pole: 300 mA - 200 - 440 V |
| Number of poles | Number of poles | 2-pole / 4-pole | two pole / four pole |
| Lightning-resistant | lightning-proof | yes | yes |
- Rated control supply voltage [Us]: 24–240 V AC, 50–400 Hz; 24–240 V DC Contacts: 1 NO + 1 NC
- Mounting: snaps onto DIN rail according to IEC/EN 60715 Ambient temperature: unencapsulated -25 to +60 °C; encapsulated -25 to +45 °C
- Degree of protection: IP20 Safe isolation according to EN 61140: 250 V AC between contacts; 250 V AC between contacts and supply voltage
-
Overvoltage category / pollution degree: category III / degree 3
- Rated operational current [Ie]: AC-15 at 240 V: 3 A; AC-14 at 300 V: 3 A and 400 V: 3 A; NO/NC at 300 V: 3 A and 380/400/415 V: 3 A (AC-14); NO/NC at 220/230/240 V: 3 A and 380/400/415 V: 1 A (AC-15)
- Conventional thermal current Ith: 6 A
- Power consumption: AC 3.5 VA; DC 2 W Trip/reset values: trip at ≥ 3600 Ω; reset at ≤ 1600 Ω
-
Maximum sensor cable length: 250 m, unshielded
- Dimensions (W × H × D): 23 × 84 × 104 mm
- Standards: IEC/EN 60947, VDE 0660, EN 55011
-
Rated voltage AC max. 230 V; Rated voltage AC min. 230 V; Rated frequency min. 50 Hz; Rated frequency max. 50 Hz; Degree of protection IP20; Front mounting under motor-starter cover; Width (net) 42 mm; Height (net) 25 mm; Depth (net) 45 mm; max. 60°C
Rated voltage AC max. 400 V; Rated voltage AC min. 400 V; Rated frequency min. 50 Hz; Rated frequency max. 50 Hz; Degree of protection IP20; Front mounting under motor-starter cover; Width (net) 42 mm; Height (net) 25 mm; Depth (net) 45 mm; max. 60°C
Max. load current from rail end 63 A; Max. load current from rail centre 100 A; Degree of protection IP20; Modules 2; Poles 3; Outlets 6; Phases 3; Fork mounting; Insulated YES; Width (net) 100 mm; Height (net) 32 mm; Depth (net) 11 mm; Connection cross-section Cu (solid) min. 6 mm2, max. 25 mm2; max. 60°C
In stock
IP55, wall mounting; Width (net) 80 mm; Height (net) 135 mm; Depth (net) 95,5 mm
In stock
Rated operating current AC-15 / AC 230 V: 3,5 A; Rated operating voltage AC 690 V; Rated impulse withstand voltage 6 kV; Degree of protection IP20; Side mounting; Width (net) 9 mm; Height (net) 80 mm; Depth (net) 77 mm; max. 60°C
In stock
Rated operating current AC-15 / AC 230 V: 3,5 A; Rated operating voltage AC 690 V; Rated impulse withstand voltage 6 kV; Degree of protection IP20; Side mounting; Width (net) 9 mm; Height (net) 80 mm; Depth (net) 77 mm; max. 60°C
Items 1 - 10 of 14