ORIENTAL MOTOR
Items 1 - 50 of 588
• Description of Specification Items
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.189 A
single-Phase 100 VAC / 60 Hz / 0.192 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 40 mN·m / 1450 r/min - capacitor: Product name: CH30FAUL2, Capacity: 3.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.194 A
single-Phase 100 VAC / 60 Hz / 0.197 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 40 mN·m / 1450 r/min - capacitor: Product name: CH30FAUL2, Capacity: 3.0 µF, Rated voltage: 250 VAC
- Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.097 A
single-Phase 200 VAC / 60 Hz / 0.096 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 40 mN·m
single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 50 mN·m / 1200 r/min
single-Phase 200 VAC / 60 Hz: 40 mN·m / 1450 r/min - capacitor: Product name: CH075BFAUL, Capacity: 0.75 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.102 A
single-Phase 200 VAC / 60 Hz / 0.100 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 40 mN·m
single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 50 mN·m / 1200 r/min
single-Phase 200 VAC / 60 Hz: 40 mN·m / 1450 r/min - capacitor: Product name: CH075BFAUL, Capacity: 0.75 µF, Rated voltage: 450 VAC
- Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.179 A
single-Phase 115 VAC / 60 Hz / 0.184 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 40 mN·m
single-Phase 115 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH25FAUL2, Capacity: 2.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.185 A
single-Phase 115 VAC / 60 Hz / 0.189 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 40 mN·m
single-Phase 115 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH25FAUL2, Capacity: 2.5 µF, Rated voltage: 250 VAC
- Mass: 0.7 kg
- Frame Size: 70 mm
- Output Power: 15 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.35 A
single-Phase 100 VAC / 60 Hz / 0.33 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 73 mN·m
single-Phase 100 VAC / 60 Hz: 65 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 120 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 100 mN·m / 1500 r/min - capacitor: Product name: CH50FAUL2, Capacity: 5.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 1.1 kg
- Frame Size: 70 mm
- Output Power: 15 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.35 A
single-Phase 100 VAC / 60 Hz / 0.33 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 73 mN·m
single-Phase 100 VAC / 60 Hz: 65 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 120 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 100 mN·m / 1500 r/min - capacitor: Product name: CH50FAUL2, Capacity: 5.0 µF, Rated voltage: 250 VAC
- Mass: 1.1 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 220 VAC / 50 Hz / 0.103 A
single-Phase 220 VAC / 60 Hz / 0.091 A
single-Phase 230 VAC / 50 Hz / 0.107 A
single-Phase 230 VAC / 60 Hz / 0.094 A - Starting Torque (Motor Shaft): single-Phase 220 VAC / 50 Hz: 38 mN·m
single-Phase 220 VAC / 60 Hz: 40 mN·m
single-Phase 230 VAC / 50 Hz: 45 mN·m
single-Phase 230 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 220 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 220 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 230 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 230 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH06BFAUL, Capacity: 0.6 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 220 VAC / 50 Hz / 0.106 A
single-Phase 220 VAC / 60 Hz / 0.099 A
single-Phase 230 VAC / 50 Hz / 0.111 A
single-Phase 230 VAC / 60 Hz / 0.100 A - Starting Torque (Motor Shaft): single-Phase 220 VAC / 50 Hz: 38 mN·m
single-Phase 220 VAC / 60 Hz: 40 mN·m
single-Phase 230 VAC / 50 Hz: 45 mN·m
single-Phase 230 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 220 VAC / 50 Hz: 46 mN·m / 1150 r/min
single-Phase 220 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 230 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 230 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH06BFAUL, Capacity: 0.6 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
- Frame Size: 70 mm
- Output Power: 15 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.17 A
single-Phase 200 VAC / 60 Hz / 0.17 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 80 mN·m
single-Phase 200 VAC / 60 Hz: 65 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 120 mN·m / 1200 r/min
single-Phase 200 VAC / 60 Hz: 100 mN·m / 1500 r/min - capacitor: Product name: CH13BFAUL, Capacity: 1.3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 1.1 kg
- Frame Size: 70 mm
- Output Power: 15 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.17 A
single-Phase 200 VAC / 60 Hz / 0.17 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 80 mN·m
single-Phase 200 VAC / 60 Hz: 65 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 120 mN·m / 1200 r/min
single-Phase 200 VAC / 60 Hz: 100 mN·m / 1500 r/min - capacitor: Product name: CH13BFAUL, Capacity: 1.3 µF, Rated voltage: 450 VAC
- Mass: 1.1 kg
- Frame Size: 70 mm
- Output Power: 15 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.31 A
single-Phase 115 VAC / 60 Hz / 0.31 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 65 mN·m
single-Phase 115 VAC / 60 Hz: 65 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 105 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 105 mN·m / 1450 r/min - capacitor: Product name: CH40FAUL2, Capacity: 4.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 1.1 kg
- Frame Size: 70 mm
- Output Power: 15 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.31 A
single-Phase 115 VAC / 60 Hz / 0.31 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 65 mN·m
single-Phase 115 VAC / 60 Hz: 65 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 105 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 105 mN·m / 1450 r/min - capacitor: Product name: CH40FAUL2, Capacity: 4.0 µF, Rated voltage: 250 VAC
- Mass: 1.1 kg
- Frame Size: 70 mm
- Output Power: 15 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 220 VAC / 50 Hz / 0.19 A
single-Phase 220 VAC / 60 Hz / 0.16 A
single-Phase 230 VAC / 50 Hz / 0.19 A
single-Phase 230 VAC / 60 Hz / 0.16 A - Starting Torque (Motor Shaft): single-Phase 220 VAC / 50 Hz: 70 mN·m
single-Phase 220 VAC / 60 Hz: 65 mN·m
single-Phase 230 VAC / 50 Hz: 75 mN·m
single-Phase 230 VAC / 60 Hz: 65 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 220 VAC / 50 Hz: 125 mN·m / 1200 r/min
single-Phase 220 VAC / 60 Hz: 105 mN·m / 1450 r/min
single-Phase 230 VAC / 50 Hz: 125 mN·m / 1200 r/min
single-Phase 230 VAC / 60 Hz: 105 mN·m / 1450 r/min - capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.1 kg
- Frame Size: 70 mm
- Output Power: 15 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 220 VAC / 50 Hz / 0.19 A
single-Phase 220 VAC / 60 Hz / 0.16 A
single-Phase 230 VAC / 50 Hz / 0.19 A
single-Phase 230 VAC / 60 Hz / 0.16 A - Starting Torque (Motor Shaft): single-Phase 220 VAC / 50 Hz: 70 mN·m
single-Phase 220 VAC / 60 Hz: 65 mN·m
single-Phase 230 VAC / 50 Hz: 75 mN·m
single-Phase 230 VAC / 60 Hz: 65 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 220 VAC / 50 Hz: 125 mN·m / 1200 r/min
single-Phase 220 VAC / 60 Hz: 105 mN·m / 1450 r/min
single-Phase 230 VAC / 50 Hz: 125 mN·m / 1200 r/min
single-Phase 230 VAC / 60 Hz: 105 mN·m / 1450 r/min - capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.1 kg
• The product name written on the motor nameplate is 2IK6A-AW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 100 VAC capacitor included (this product)
U: single-phase 110 VAC/115 VAC capacitor included. (2IK6A-AW2U)
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.199 A
single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
2IK6GN-AW2J general-purpose motor WK2 series
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• The product name written on the motor nameplate is 2IK6A-CW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 200 VAC capacitor included (this product)
E: single-phase 220 VAC/230 VAC capacitor included. (2IK6A-CW2E)
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.1 A
single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 45 mN·m
single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
2IK6GN-CW2J general-purpose motor WK2 series
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 80 mm
- Output Power: 25 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.48 A
single-Phase 100 VAC / 60 Hz / 0.46 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 110 mN·m
single-Phase 100 VAC / 60 Hz: 110 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 190 mN·m / 1250 r/min
single-Phase 100 VAC / 60 Hz: 160 mN·m / 1550 r/min - capacitor: Product name: CH70CFAUL2, Capacity: 7.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 1.5 kg
- Frame Size: 80 mm
- Output Power: 25 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.48 A
single-Phase 100 VAC / 60 Hz / 0.46 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 110 mN·m
single-Phase 100 VAC / 60 Hz: 110 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 190 mN·m / 1250 r/min
single-Phase 100 VAC / 60 Hz: 160 mN·m / 1550 r/min - capacitor: Product name: CH70CFAUL2, Capacity: 7.0 µF, Rated voltage: 250 VAC
- Mass: 1.5 kg
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 80 mm
- Output Power: 25 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.25 A
single-Phase 200 VAC / 60 Hz / 0.23 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 100 mN·m
single-Phase 200 VAC / 60 Hz: 100 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 190 mN·m / 1250 r/min
single-Phase 200 VAC / 60 Hz: 160 mN·m / 1500 r/min - capacitor: Product name: CH18BFAUL, Capacity: 1.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 1.5 kg
- Frame Size: 80 mm
- Output Power: 25 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.44 A
single-Phase 115 VAC / 60 Hz / 0.43 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 120 mN·m
single-Phase 115 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 170 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 170 mN·m / 1450 r/min - capacitor: Product name: CH60CFAUL2, Capacity: 6.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 1.5 kg
- Frame Size: 80 mm
- Output Power: 25 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.25 A
single-Phase 200 VAC / 60 Hz / 0.23 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 100 mN·m
single-Phase 200 VAC / 60 Hz: 100 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 190 mN·m / 1250 r/min
single-Phase 200 VAC / 60 Hz: 160 mN·m / 1500 r/min - capacitor: Product name: CH18BFAUL, Capacity: 1.8 µF, Rated voltage: 450 VAC
- Mass: 1.5 kg
- Frame Size: 80 mm
- Output Power: 25 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gear head.
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.44 A
single-Phase 115 VAC / 60 Hz / 0.43 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 120 mN·m
single-Phase 115 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 170 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 170 mN·m / 1450 r/min - Capacito
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
3IK15A-AW2J general-purpose motor WK2 series
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• The product name written on the motor nameplate is 3IK15GN-AW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 100 VAC capacitor included (this product)
U: single-phase 110 VAC/115 VAC capacitor included. (3IK15GN-AW2U)
- Frame Size: 70 mm
- Output Power: 15 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.36 A
single-Phase 100 VAC / 60 Hz / 0.37 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 80 mN·m
single-Phase 100 VAC / 60 Hz: 65 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 125 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 105 mN·m / 1450 r/min - The Speed When Installing gearhead: Depends on the combination gearhead.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gearhead.
- Permissible Inertia J: Depends on the combination gearhead.
- capacitor: Product name: CH55FAUL2, Capacity: 5.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.1 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• The product name written on the motor nameplate is 0IK1A-AW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 42 mm
- Output Power: 1 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.107 A
single-Phase 100 VAC / 60 Hz / 0.102 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 8 mN·m
single-Phase 100 VAC / 60 Hz: 8 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 9.5 mN·m / 1000 r/min
single-Phase 100 VAC / 60 Hz: 8 mN·m / 1200 r/min - capacitor: Product name: CH15FAUL, Capacity: 1.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the symbol (J) that indicates the type of capacitor.
• The product name written on the motor nameplate is 0IK1A-AW3. The suffix (U) in the product name above indicates the type of capacitor.
- Frame Size: 42 mm
- Output Power: 1 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.074 A
single-Phase 115 VAC / 60 Hz / 0.078 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 8 mN·m
single-Phase 115 VAC / 60 Hz: 8 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 8 mN·m / 1200 r/min
single-Phase 115 VAC / 60 Hz: 8 mN·m / 1200 r/min - capacitor: Product name: CH10FAUL, Capacity: 1 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
0IK1GN-AW2J general-purpose motor WK2 series
0IK1GN-AW3U general-purpose motor WK2 series
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
3IK15A-CW2J general-purpose motor WK2 series
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
3IK15GN-CW2J general-purpose motor WK2 series
- Frame Size: 80 mm
- Output Power: 25 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 220 VAC / 50 Hz / 0.27 A
single-Phase 220 VAC / 60 Hz / 0.23 A
single-Phase 230 VAC / 50 Hz / 0.27 A
single-Phase 230 VAC / 60 Hz / 0.23 A - Starting Torque (Motor Shaft): single-Phase 220 VAC / 50 Hz: 110 mN·m
single-Phase 220 VAC / 60 Hz: 110 mN·m
single-Phase 230 VAC / 50 Hz: 120 mN·m
single-Phase 230 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 220 VAC / 50 Hz: 205 mN·m / 1200 r/min
single-Phase 220 VAC / 60 Hz: 170 mN·m / 1450 r/min
single-Phase 230 VAC / 50 Hz: 205 mN·m / 1200 r/min
single-Phase 230 VAC / 60 Hz: 170 mN·m / 1450 r/min - capacitor: Product name: CH15BFAUL, Capacity: 1.5 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.5 kg
Items 1 - 50 of 588