ORIENTAL MOTOR
Items 161 - 200 of 689
Imperial output shaft 3/8 in (9.525 mm); Frame size: 70 mm; Mass: 0.55 kg.
- for motor frame size: 70 mmDegree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-S gearhead
- Gear Ratio: 3.6
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Imperial output shaft 3/8 in (9.525 mm); Frame size: 70 mm; Mass: 0.55 kg.
- for motor frame size: 70 mmDegree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Imperial output shaft 3/8 in (9.525 mm); Frame size: 70 mm; Mass: 0.55 kg.
- for motor frame size: 70 mmDegree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 3
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
Imperial output shaft 3/8 in (9.525 mm); Frame size: 70 mm; Mass: 0.55 kg.
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 3
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-S gearhead
- Gear Ratio: 3
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Imperial output shaft 3/8 in (9.525 mm); Frame size: 70 mm; Mass: 0.55 kg.
- for motor frame size: 70 mmDegree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
Imperial output shaft 3/8 in (9.525 mm); Frame size: 70 mm; Mass: 0.55 kg.
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-S gearhead
- Gear Ratio: 5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Imperial output shaft 3/8 in (9.525 mm); Frame size: 70 mm; Mass: 0.55 kg.
- for motor frame size: 70 mmDegree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 6
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
Imperial output shaft 3/8 in (9.525 mm); Frame size: 70 mm; Mass: 0.55 kg.
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 6
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-S gearhead
- Gear Ratio: 6
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Imperial output shaft 3/8 in (9.525 mm); Frame size: 70 mm; Mass: 0.55 kg.
- for motor frame size: 70 mmDegree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Imperial output shaft 3/8 in (9.525 mm); Frame size: 70 mm; Mass: 0.55 kg.
- for motor frame size: 70 mmDegree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Imperial output shaft 3/8 in (9.525 mm); Frame size: 70 mm; Mass: 0.55 kg.
- for motor frame size: 70 mmDegree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 9
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
Imperial output shaft 3/8 in (9.525 mm); Frame size: 70 mm; Mass: 0.55 kg.
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 9
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-S gearhead
- Gear Ratio: 9
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Gear Ratio: 100
- Rotation Direction: opposite direction as the motor
- Mass: 0.51 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Gear Ratio: 12.5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.42 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Gear Ratio: 120
- Rotation Direction: opposite direction as the motor
- Mass: 0.51 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Gear Ratio: 150
- Rotation Direction: same direction as the motor shaft
- Mass: 0.58 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Gear Ratio: 15
- Rotation Direction: same direction as the motor shaft
- Mass: 0.42 kg
Items 161 - 200 of 689