ORIENTAL MOTOR
Items 1 - 30 of 83
- Frame Size: 70 mm
- Shaft/Gear Type: Decimal gearhead (GN Gear Cutting)
- Gear Ratio: 10 (Decimal gearhead)
- Mass: 0.3 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Decimal gearhead (GN Gear Cutting)
- Gear Ratio: 10 (Decimal gearhead)
- Mass: 0.2 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 12.5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-S gearhead
- Gear Ratio: 12.5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-S gearhead
- Gear Ratio: 3.6
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 3
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-S gearhead
- Gear Ratio: 3
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-S gearhead
- Gear Ratio: 5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 6
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-S gearhead
- Gear Ratio: 6
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-KGearhead
- Gear Ratio: 9
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GN-S gearhead
- Gear Ratio: 9
- Rotation Direction: same direction as the motor shaft
- Mass: 0.34 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Gear Ratio: 12.5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.42 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Gear Ratio: 15
- Rotation Direction: same direction as the motor shaft
- Mass: 0.42 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Gear Ratio: 18
- Rotation Direction: same direction as the motor shaft
- Mass: 0.42 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Gear Ratio: 25
- Rotation Direction: same direction as the motor shaft
- Mass: 0.42 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Gear Ratio: 5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.42 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Gear Ratio: 6
- Rotation Direction: same direction as the motor shaft
- Mass: 0.42 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Gear Ratio: 7.5
- Rotation Direction: same direction as the motor shaft
- Mass: 0.42 kg
- Frame Size: 70 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Gear Ratio: 9
- Rotation Direction: same direction as the motor shaft
- Mass: 0.42 kg
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 70 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Items 1 - 30 of 83