ORIENTAL MOTOR
Items 1 - 20 of 16613
Best sellers
- for motor frame size: 80 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Best sellers
• Description of Specification Items
- Frame Size: 80 mm
- Output Power: 25 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.113 A
Three-Phase380 VAC / 60 Hz / 0.102 A
Three-Phase400 VAC / 50 Hz / 0.116 A
Three-Phase400 VAC / 60 Hz / 0.103 A
Three-Phase415 VAC / 50 Hz / 0.118 A - Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 270 mN·m
Three-Phase 380 VAC / 60 Hz: 220 mN·m
Three-Phase 400 VAC / 50 Hz: 270 mN·m
Three-Phase 400 VAC / 60 Hz: 220 mN·m
Three-Phase 415 VAC / 50 Hz: 270 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 205 mN·m / 1200 r/min
Three-Phase 380 VAC / 60 Hz: 170 mN·m / 1450 r/min
Three-Phase 400 VAC / 50 Hz: 205 mN·m / 1200 r/min
Three-Phase 400 VAC / 60 Hz: 170 mN·m / 1450 r/min
Three-Phase 415 VAC / 50 Hz: 205 mN·m / 1200 r/min - The Speed When Installing gearhead: Depends on the combination gearhead.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gearhead.
- Permissible Inertia J: Depends on the combination gearhead.
- capacitor: -
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
Best sellers
- Frame Size: 80 mm
- Shaft/Gear Type: Decimal gearhead (GN Gear Cutting)
- Gear Ratio: 10 (Decimal gearhead)
- Mass: 0.4 kg
Best sellers
CH25BFAUL replacement capacitor
Best sellers
composed of: PKP244MD15B2+LC2B06E
| 2-Phase/5-Phase | 2-Phase |
|---|---|
| Frame size | 42 mm |
| Type | High resolution |
| Connection system | Bipolar 4 Lead Wires |
| Shaft type | double haft |
| Electromagnetic Brake | Not Equipped |
| Connection Cable Type | Mini Connector |
| Motor Connection Cable Length | 0.6 m |
| Maximum Holding Torque | 0.42 N·m |
| Rotor Inertia J | 58×10-7 kg·m2 |
| Gear ratio | - |
| Basic Step Angle | 0.9° |
| Rated Current | 1.5 A/phase |
| Voltage | 3.2 V |
| Winding resistance | 2.1 Ω/phase |
| Inductance | 6 mH/phase |
| Motor Thermal Class | 130 (B) |
- Type: Connection cable for 2-Phase PKP series
- Connection Point: Motor~circuit
- cable Type: Standard
- Length: 0.6 m
- Materials: SPCC
- Surface treatment: Electroless Nickel Plating
- Configuration: DIN Rail Mounting Bracket
- Driver Type: Analog Setting Type
- Power Supply Input Rated Voltage: 24 VDC
- Power Supply Input Permissible Voltage Range: -10–+10%
- Type: Connection cable 5-Phase PKP Motor / CVD Driver
- Connection Point: Motor~circuit
- cable Type: Standard
- Length: 0.5 m
• For details, please refer to the Dimension.
- Type: Connection cable for 5-Phase PKP series
- Connection Point: Motor~circuit
- cable Type: Standard
- Length: 0.6 m
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Materials: Control CircuitCover: modified polyphenylene ether (PPE)
Cover for setting SW: Modified polyphenylene ether (PPE)
Flammability Classification: 94V-0 - Degree of Protection: IP20
- Applicable Product: BLH2D15 (H)-K, BLH2D30 (H)-K, BLH2D30DH-K, BLH2D50 (H)-K, BLH2D50DH-K, BLH2D15 (H)-KD, BLH2D30 (H)-KD, BLH2D30DH-KD, BLH2D50 (H)-KD, BLH2D50DH-KD, BLH2D15 (H)-KR, BLH2D30 (H)-KR, BLH2D30DH-KR, BLH2D50 (H)-KR, BLH2D50DH-KR
- Mass: 10 g
- for motor frame size: 80 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Type: Connection cable for 2-Phase PKP series
- Connection Point: Motor~circuit
- cable Type: Standard
- Length: 0.6 m
- series: MRS series
- Size: Square 160 mm–62 mm thick
- Connection Type: Terminal Block
- Speed Control: Not available
- Additional Function: Not available
- Alarm functions: Not available
- Voltage/ Frequency/ Current/ Input: single-Phase 220 VAC / 50 Hz / 0.20 A / 38 W
single-Phase 220 VAC / 60 Hz / 0.21 A / 40 W
single-Phase 230 VAC / 50 Hz / 0.21 A / 42 W
single-Phase 230 VAC / 60 Hz / 0.21 A / 42 W - Operating Voltage Range: ±10%
- Rotation Speed: single-Phase 220 VAC / 50 Hz: 2800 r/min
single-Phase 220 VAC / 60 Hz: 3250 r/min
single-Phase 230 VAC / 50 Hz: 2800 r/min
single-Phase 230 VAC / 60 Hz: 3300 r/min - Maximum Air Flow: single-Phase 220 VAC / 50 Hz: 6.2 m3/min
single-Phase 220 VAC / 60 Hz: 7.3 m3/min
single-Phase 230 VAC / 50 Hz: 6.2 m3/min
single-Phase 230 VAC / 60 Hz: 7.3 m3/min - Maximum Static Pressure: single-Phase 220 VAC / 50 Hz: 127 Pa
single-Phase 220 VAC / 60 Hz: 157 Pa
single-Phase 230 VAC / 50 Hz: 127 Pa
single-Phase 230 VAC / 60 Hz: 157 Pa - Noise Level: single-Phase 220 VAC / 50 Hz: 49 dB (A)
single-Phase 220 VAC / 60 Hz: 53 dB (A)
single-Phase 230 VAC / 50 Hz: 49 dB (A)
single-Phase 230 VAC / 60 Hz: 54 dB (A) - Capacitance: 3.0 µF
- Materials: Frame: Aluminum die cast
Blade: Polycarbonate (Flammability Classification V-0) - Overheat Protection: Built-In Thermal Protector
- Bearing: Ball bearings
- 2-Phase/5-Phase: 2-Phase
- Frame Size: 42 mm
- Type: Standard
- Connection System: Unipolar 6 Lead Wires
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Connection cable Type: connector
- Maximum Holding Torque: 0.25 N·m
- Rotor Inertia J: 36×10-7 kg·m2
- Gear Ratio: -
- Basic Step Angle: 1.8°
- Rated Current: 0.4 A/Phase
- Voltage: 12 V
- Winding Resistance: 30 Ω/Phase
- Motor Thermal Class: 130 (B)
- Motor Section Mass: 0.25 kg
The PKP2 series 2-phase stepper motors are high-quality precision motors for automation and positioning applications.
Available in various Frame sizes and shaft configurations, with or without an Encoder and with an optional Electromagnetic brake.
Please select the required version.
• Standard version with 200 steps per revolution (basic step angle: 1.8˚/step)
• Bipolar (4 lead wires) and unipolar (5 or 6 lead wires) versions are available
• Versions with an Encoder and Electromagnetic brake are available
- Frame Size: 80 mm
- Maximum Output Power: 25 W
- Time Rating: Continuous
- Motor Type: Induction Motor
- Shaft/Gear Type: Round Shaft Type
- Gear Ratio: -
- Voltage/ Frequency/ Current/ Power Consumption: Single-Phase220 VAC / 50 Hz / 0.36 A / 68 W
Single-Phase220 VAC / 60 Hz / 0.37 A / 68 W
Single-Phase230 VAC / 50 Hz / 0.35 A / 68 W
Single-Phase230 VAC / 60 Hz / 0.36 A / 68 W - Starting Torque (Motor Shaft): Single-Phase220 VAC / 50 Hz: 100 mN·m
Single-Phase220 VAC / 60 Hz: 100 mN·m
Single-Phase230 VAC / 50 Hz: 110 mN·m
Single-Phase230 VAC / 60 Hz: 110 mN·m - Speed Control Range: 50Hz: 90-1400r/min
60Hz: 90-1600r/min - Permissible Torque (Motor Shaft): Single-Phase220 VAC / 50 Hz, Setting speed90 r/min: 40 mN·m
Single-Phase220 VAC / 60 Hz, Setting speed90 r/min: 40 mN·m
Single-Phase230 VAC / 50 Hz, Setting speed90 r/min: 40 mN·m
Single-Phase230 VAC / 60 Hz, Setting speed90 r/min: 35 mN·m
Single-Phase220 VAC / 50 Hz, Setting speed1200 r/min: 205 mN·m
Single-Phase220 VAC / 60 Hz, Setting speed1200 r/min: 160 mN·m
Single-Phase230 VAC / 50 Hz, Setting speed1200 r/min: 205 mN·m
Single-Phase230 VAC / 60 Hz, Setting speed1200 r/min: 140 mN·m - Speed Setting Methods: Control Circuitpotentiometer on front panel
- Function: Speed Controller
- Maximum Extension Distance: Between Motor and Circuit 4.75 m
- Overheat Protective Device Type: Thermal protector
- Motor Section Mass: 1.6 kg
- Circuit Mass: 0.45 kg
• Certification for various safety standards is obtained for the motor unit product name and the circuit unit product name.
• The speed control range is the value at no load.
[Note]
• This indicates that there is a built-in thermal protector (automatic return type).If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the motor restarts automatically. Be sure to turn the power supply off before inspecting.
K-series torque motor – variants (power, shaft type, voltage)
The K-series torque motors are suitable for applications with constant traction and simple speed control via the supply voltage.
Please select the service first; then the wave type and voltage are automatically limited to the available combinations.
Characteristics
- High start-up torque, falling torque-speed characteristic (torque ~ U2).
- Operation as a brake possible (direct current for constant tractive force).
- Integrated thermal protection (automatically resetting).
- Degree of protection IP20.
- contain capacitor (J/U/E depending on voltage); Not specified on the nameplate.
- Accessories such as capstan included; Gearbox available separately (can only be combined with pinion shaft); not included in this variant article.
Varianten & Hinweise
- Performance: 3 W, 6 W, 10 W, 20 W.
- Wellenart: Pinion shaft "GN" or round shaft "A" (round shaft can be combined without transmission).
Voltage: 100 V / 110-115 V / 200 V / 220-230 V.
- (Angular gears cannot be combined.)
(capacitor type J/U/E depending on the voltage variant); Not separately selectable.
Scope of delivery
- Motor including suitable operating capacitor and capacitor cap.
- for motor frame size: 80 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Items 1 - 20 of 16613