Induction motors
Items 401 - 420 of 482
- Output power: 90 W
- Speed: 1500 min-1
- Motor frame size: 90 mm
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Speed: 1500 min-1
- Motor frame size: 90 mm
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• Description of Specification Items
• The product name written on the motor nameplate is 5IK90GE-CW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 200 VAC capacitor included (this product)
E: single-phase 220 VAC/230 VAC capacitor included. (5IK90GE-CW2E)
- Frame Size: 90 mm
- Output Power: 90 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.8 A
single-Phase 200 VAC / 60 Hz / 0.93 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 450 mN·m
single-Phase 200 VAC / 60 Hz: 450 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 730 mN·m / 1200 r/min
single-Phase 200 VAC / 60 Hz: 605 mN·m / 1450 r/min - The Speed When Installing gearhead: Depends on the combination gearhead.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gearhead.
- Permissible Inertia J: Depends on the combination gearhead.
- capacitor: Product name: CH70BFAUL, Capacity: 7 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 3.2 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Frame Size: 90 mm
- Output Power: 90 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gear head.
- Voltage/ Frequency/ Current: single-Phase 220 VAC / 50 Hz / 0.74 A
single-Phase 220 VAC / 60 Hz / 0.82 A
single-Phase 230 VAC / 50 Hz / 0.76 A
single-Phase 230 VAC / 60 Hz / 0.81 A - Starting Torque (Motor Shaft): single-Phase 220 VAC / 50 Hz: 450 mN·m
single-Phase 220 VAC / 60 Hz: 450 mN·m
single-Phase 230 VAC / 50 Hz: 450 mN·m
single-Phase 230 VAC / 60 Hz: 450 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 220 VAC / 50 Hz: 730 mN·m / 1200 r/min
single-Phase 220 VAC / 60 Hz: 605 mN·m / 1450 r/min
single-Phase 230 VAC / 50 Hz: 730 mN·m / 1200 r/min
single-Phase 230 VAC / 60 Hz: 605 mN·m / 1450 r/min - The Speed When Installing gearhead:
This varies depending on the gear head used.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gear head.
- Permissible Inertia J: Depends on the combination gear head.
- capacitor: Product name: CH60BFAUL, Capacity: 6 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
5IK90GE-CW2TJ general-purpose motor WK2 series
5IK90GE-ECH general-purpose motor WK2 series
5IK90GE-FCH general-purpose motor WK2 series
- Output power: 90 W
- Speed: 1500 min-1
- Motor frame size: 90 mm
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Speed: 1500 min-1
- Motor frame size: 90 mm
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 90 W
- Speed: 1500 min-1
- Motor frame size: 90 mm
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Speed: 1500 min-1
- Motor frame size: 90 mm
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 90 mm
- Output Power: 90 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: Three-Phase380 VAC / 50 Hz / 0.39 A
Three-Phase380 VAC / 60 Hz / 0.33 A
Three-Phase400 VAC / 50 Hz / 0.41 A
Three-Phase400 VAC / 60 Hz / 0.34 A
Three-Phase415 VAC / 50 Hz / 0.44 A - Starting Torque (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 850 mN·m
Three-Phase 380 VAC / 60 Hz: 700 mN·m
Three-Phase 400 VAC / 50 Hz: 850 mN·m
Three-Phase 400 VAC / 60 Hz: 700 mN·m
Three-Phase 415 VAC / 50 Hz: 850 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 380 VAC / 50 Hz: 680 mN·m / 1300 r/min
Three-Phase 380 VAC / 60 Hz: 570 mN·m / 1550 r/min
Three-Phase 400 VAC / 50 Hz: 680 mN·m / 1300 r/min
Three-Phase 400 VAC / 60 Hz: 570 mN·m / 1550 r/min
Three-Phase 415 VAC / 50 Hz: 680 mN·m / 1300 r/min - The Speed When Installing gearhead: Depends on the combination gearhead.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gearhead.
- Permissible Inertia J: Depends on the combination gearhead.
- capacitor: -
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 3.2 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• It cannot be used in combination with inverter. The insulation of the motor winding may deteriorate and be damaged.
5IK90GE-UW2T2 general-purpose motor WK2 series
5IK90GU-AW general-purpose motor WK series
- Frame Size: 90 mm
- Output Power: 90 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gear head.
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 1.64 A
single-Phase 100 VAC / 60 Hz / 1.67 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 450 mN·m
single-Phase 100 VAC / 60 Hz: 450 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 700 mN·m / 1250 r/min
single-Phase 100 VAC / 60 Hz: 585 mN·m / 1500 r/min - The Speed When Installing gearhead: Depends on the combination gear head.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gear head.
- Permissible Inertia J: Depends on the combination gear head.
- capacitor: Product name: CH280CFAUL2, Capacity: 28 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
The product name written on the motor nameplate is 5IK90GU-AW. The suffix of the product name above indicates the type of capacitor.
J: single-phase 100 VAC capacitor included (this product)
U: single-phase 110 VAC/115 VAC capacitor included. (5IK90GU-AWU)
5IK90GU-AWT general-purpose motor WK series
5IK90GU-AWTJ general-purpose motor WK series
• The product name written on the motor nameplate is 5IK90GU-AWT. The suffix of the product name above indicates the type of capacitor.
U: single-phase 110 VAC/115 VAC capacitor included (this product)
J: single-phase 100 VAC capacitor included. (5IK90GU-AWTJ)
- Frame Size: 90 mm
- Output Power: 90 W
- Type: With Terminal Box
- Shaft/Gear Type: Pinion Shaft Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 1.45 A
single-Phase 115 VAC / 60 Hz / 1.44 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 450 mN·m
single-Phase 115 VAC / 60 Hz: 450 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 585 mN·m / 1500 r/min
single-Phase 115 VAC / 60 Hz: 585 mN·m / 1500 r/min - The Speed When Installing gearhead: Depends on the combination gearhead.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gearhead.
- Permissible Inertia J: Depends on the combination gearhead.
- capacitor: Product name: CH200CFAUL2, Capacity: 20 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 3.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
5IK90GU-AWU general-purpose motor WK series
5IK90GU-CW general-purpose motor WK series
5IK90GU-CWE general-purpose motor WK series
5IK90GU-CWJ general-purpose motor WK series
5IK90GU-CWT general-purpose motor WK series
Items 401 - 420 of 482