Skip to main content Skip to search Skip to navigation

IE2 1AC 112 M 6 2,20 kW BK + AK single-phase induction motor

  • IP55
  • 2,20 kW
  • S1
  • 975 1/min
  • 230 V, 50 Hz ±5%
  • 12,06 A
  • End of shaft according to DIN/IEC Ø28 x 60 mm Heat class 155(F)
  • Temperature protection: incl. 1 x PTC thermosensor
  • terminal box layer at top
  • Efficiency class = IE2, efficiency = 81,8 %
  • Start capacitor/start capacitor μF 200μF/300V
  • Operating capacitor/run capacitor μF 60μF/450V
  • Approach to nominal torque / start- to rated torque 1,87
  • tilt-to-rated torque / brakedown-to-rated torque 1,80
  • Accommodation to rated current 5,40 / startíng- to rated current
  • Capacitor circuit start-up relays/starting relays
  • shaft seal (DE/NDE) 30x44x7
  • Moment of inertia / moment of inertia (kg*m2) 0,019492140
  • housing of die cast aluminium
  • Motor feet can be screwed on or unscrewed
  • AC motors are suitable for both directions of rotation
  • with operating capacitor nominal power at max 40° C and up to 1000 m above NN
  • dynamically balanced with half paste spring inserted
  • Vibration level "N"
  • Due to the start-up and operating capacitor, the 230V motor has a stronger start-up torque.
  • The start-up capacitor is switched off by a centrifugal force switch when the speed is reached.
  • At low load, the temperature in the engine increases sharply and this can lead to failures.
  • Therefore, it is recommended that single-phase motors should not be operated at a load below 25 % of the rated load.
Design 
from
754,00 €
excl. 19% VAT , plus shipping costs
  • Available