Taper Couplings

Contents: 1 hub F for a PTTO coupling, size 150. Elastic element and taper bush are not included.

The taper bush can be installed from the shaft end.

Suitable taper bush: 2012; available bore range: 14-50 mm. Order the bush separately with a bore matching the shaft. The range does not specify a selected shaft bore.

Ratings for the matching complete taper-bushed coupling: nominal torque 600 Nm; maximum speed 3600 min-1.

Image illustrates the design; see datasheet for dimensions.

Contents: 1 hub H for a PTTO coupling, size 150. Elastic element and taper bush are not included.

The taper bush can be installed from the hub side.

Suitable taper bush: 2012; available bore range: 14-50 mm. Order the bush separately with a bore matching the shaft. The range does not specify a selected shaft bore.

Ratings for the matching complete taper-bushed coupling: nominal torque 600 Nm; maximum speed 3600 min-1.

Image illustrates the design; see datasheet for dimensions.

Contents per set: 2x HUB PTTO 150 F + 1x COUPLING SPIDER PTTO 150 E. Taper bushes are not included.

For taper bush 2012; bore range 14-50 mm, depending on the selected bush; nominal torque 600 Nm; maximum speed 3600 min-1. The bore range does not specify a selected shaft bore.

Installation requires two 2012 taper bushes. Select and order each bush bore separately to match its shaft diameter.

Both taper bushes can be installed from the respective shaft end (2x F).

Contents per set: 1x HUB PTTO 150 H + 1x HUB PTTO 150 F + 1x COUPLING SPIDER PTTO 150 E. Taper bushes are not included.

For taper bush 2012; bore range 14-50 mm, depending on the selected bush; nominal torque 600 Nm; maximum speed 3600 min-1. The bore range does not specify a selected shaft bore.

Installation requires two 2012 taper bushes. Select and order each bush bore separately to match its shaft diameter.

One taper bush can be installed from the hub side (H), the other from the shaft end (F).

Contents per set: 2x HUB PTTO 150 H + 1x COUPLING SPIDER PTTO 150 E. Taper bushes are not included.

For taper bush 2012; bore range 14-50 mm, depending on the selected bush; nominal torque 600 Nm; maximum speed 3600 min-1. The bore range does not specify a selected shaft bore.

Installation requires two 2012 taper bushes. Select and order each bush bore separately to match its shaft diameter.

Both taper bushes can be installed from the respective hub side (2x H).