Switches
Items 1 - 6 of 6
In stock
Electronic brake switch/plug combination AC, with ground plug
with connection possibility of a thermal sensor contact
Low voltage switches according to IEC204-1,1992, EN60204, VDE0113, section 7.5.
To protect against self-starting after voltage dip and voltage return.
Input voltage 230 V, 50 Hz
Input current 13,5 A
max. Brake current 16 A
Switching power 3,0kW 230V~/AC-3
Protection IP54
Housing material PP
Installation position of any type, except keyboard facing upwards
Type of mechanical operation EIN/AUS
Ambient temperature -25°C... +50°C
- with 1m connecting line H07RN-F3G 1,5
- with motor protection,
- with brake electronics
- with
- Plug-in position ST 9
- low voltage switching contactor KB-04
Equivalent to IEC947-4-1, EN60947, DIN, VDE, 0660 Part 102
- Cable version KA9
- Engine switch (on-off) with electronic brake for 1,1- 1,5- 2,2- 3,0- 4,0 kW
- at 3 x 400V, for external assembly, cable length approximately 90cm,
- Description:
- On / Off / Stop (0 -1 / Stop)
- Low voltage release / contactor
- Electronic DC brake (engine brake)
- Engine part protection via thermosensor opener (PTO)
- Plug collar CEE 16A 5-polig with phase changer
- with transparent PVC coverage via on/off buttons
- Attachment switches (closed switch design, wall or sheet metal mounting)
- In woodworking machines, these motor switches serve as protection
- against automatic restart after voltage return.
- The temperature sensor oven (PTO) must be present in the engine!
In stock
Sensor width: 40 mm
Sensor height: 81.5 mm without actuator
Sensor length: 44 mm
Rated operational current Ie: AC-15 at 125 V: 3 A; AC-15 at 230 V: 3 A; DC-13 at 230 V: 0.27 A
Switching element: snap action; latching: no; electronic output: no; positive opening: yes
Contacts: 1 NC + 1 NO
Interface: none; safety communication interface: none
Enclosure: rectangular, metal; coating: other
Actuator: adjustable-length roller lever; actuator orientation: other
Electrical connection: metric cable entry
Status indication: no; suitable for safety functions: no
Explosion-protection category for gas/dust: none
Operating ambient temperature: -25 to +70 °C
Degree of protection: IP66/IP67
Actuation by 30° cam; minimum operating torque: 0.25 Nm; maximum operating speed: 1.5 m/s
Rated insulation voltage Ui: 300 V according to CSA C22.2 No. 14; 500 V, pollution degree 3, according to IEC 60947-1; 300 V according to UL 508
Electrical life: 5,000,000 cycles at ≤ 60 cycles/min and duty factor 0.5
Mechanical life: 30,000,000 cycles
RoHS compliant
M20 connection, 1 NC + 1 NO, snap-action principle. Complete metal-encapsulated monoblock unit.
Dimensions: 95 × 60 × 87 mm. Rated operating voltage: 1200 V DC. Impulse withstand voltage Uimp: 8 kV. Maximum current: 32 A. Rated insulation voltage Ui: 1200 V DC. Overvoltage category: II. Utilisation category: DC-21B. Operating temperature: −40 to +85 °C. Mounting on 35 mm DIN/TH rail. Brand: Schelinger.
Four-pole changeover switch with positions I-0-II; the centre off position is latching. Compact width: 4 modules (71.5 mm). Rated current: 63 A. Operating temperature: −20 to +50 °C. Mounting: 35 mm DIN rail. Rated voltage: 400 V AC, 50 Hz. Rated impulse withstand voltage: 4 kV. Rated insulation voltage: 500 V. Utilisation category: AC-22A. Degree of protection: IP20. Dimensions: 76 mm high, 84 mm long. CE marked. Brand: Schelinger. Do not switch under load.
- Rated insulation voltage Ui: 630V~
- Thermal nominal current Ith: 32 A
- Connection cross section: 1,5 -6.0 mm2 (AWG18-AWG12) single- or multi-wire, 0,5 -4.0 mm2 (AWG20-AWG14) fine-stranded with wire end sleeves
- Screw terminals: Pocidriv size 2, Pz2
- Tightening torque: 1,5 Nm
- Max. Pre-warranty: gl characteristic 35A
- Degree of protection: IP54 (IP65 with additional axle seal)
- Installation position: arbitrarily
- Mechanical life: 3x105 Circuits
- Electrical lifetime: 1x105 Circuits
- Ambient temperature open: -20°C... +50°C
- Ambient temperature encapsulated: -20°C... +40°C
- Dimensions of mounting holes: 36 x 36 mm
- Fixing screws: 4 pieces 3,5 x 14mm + wall thickness or 2x M4x9 + wall thickness
- Chamber length: 13 mm
- Switching capacity:
- AC-21 load switches: 25 A
- AC-23 Motor switch (main switch) 220-240 V3~: 7,5 kW / 380-440 V3~: 11 kW
- AC-3 motor switches (switching of cage rotor motors): 220-240 V3~: 5,5 kW / 380-440 V3~: 9,0 kW
- AC-4 motor switch (tap, counter-current brake and reversing): 220-240 V3~: 2,0 kW / 380-440 V3~: 4,0 kW
- AC-15 control switches: 220-240 V3~: 10 A/ 380-440 V3~: 6 A
Please see the enclosed cam diagram.
Electrical equipment shall be connected and put into service only by qualified professionals.
Items 1 - 6 of 6