Skip to main content Skip to search Skip to navigation

VS II 400-32 soft starter

The soft-starter VersiStart II [17 – 45 A] was developed for the controlled and low-wear start-up of three-phase induction motors. It reliably reduces starting current and torque, ensures a smooth run-up and thus extends the service life of the motor and drive. The device is microcontroller-controlled, compact and can be easily integrated into existing controllers thanks to pluggable power terminals.

Characteristics

  • Two-phase controlled soft starter
  • Microcontroller controlled
  • Optimized soft start with torque reduction
  • √3-Schaltung for more compact design
  • Easy installation, for snapping on 35 mm standard rail
  • Bridging relays integrated
  • Parameterization via three potentiometers (start-up time, start-up voltage, run-off time)
  • No additional control voltage required
  • no network center conductor (N) required
  • spring-loaded terminals on the control side, power-side pluggable connections
  • Cooling element temperature monitoring integrated
  • Compact design: 45 mm to 32 A, 52,5 mm at 45 A
  • Low-cost replacement for star/triangle switches
  • Degree of protection IP 20

Functions

  • Soft start and soft exit
  • Potential-free control input for start/stop
  • three separately adjustable parameters: Start-up time, starting voltage, run-off time
  • Boost start selectable
  • Potential-free relay outputs for operational mode, bridging and malfunction

Options

  • Special voltages 230 V / 480 V
  • Wide voltage 400–600 V with external control voltage 24 V DC (option B)
  • Reporting contact (M): Start soft start to finish soft start
  • Engine PTC monitoring (on request)

Technical data (excerpt)

  • Mains voltage Ue: 400 V ± 10 % / 50–60 Hz
  • Nominal equipment power: 17 A / 25 A / 32 A / 45 A
  • Engine power at 400 V: 7,5 – 22 kW
  • Start-up time 0,5 – 10 s | Expiration time 0,5 – 10 s
  • Starting voltage 40 – 80 %
  • Relay output: 3 A / 250 VAC and 30 VDC
  • Impact strength: 4 kV
  • Ambient temperature 0 – 45 °C / Bearing – 25 – 70 °C
  • Weight approximately 1 kg

Preferred areas of application

  • Electric pumps and vacuum pumps
  • Fans and fans
  • Drilling cranes and extraction equipment
  • Stirrers, centrifuges, saws and conveyors
  • Machinery for working wood and metal, and grinding machines

Note:

When using IE3-Motoren, the higher starting and braking currents must be taken into account. We recommend that soft starters and brake devices should generally be dimensioned to a higher power level.

522,00 €
excl. 19% VAT , plus shipping costs
pcs