Self-priming pumps
This category includes Calpeda self-priming pumps for water supply, well water extraction, pressure boosting, irrigation, drainage and a wide range of domestic, commercial and industrial applications.
The range covers different pump technologies – from self-priming jet pumps and liquid ring pumps to centrifugal pumps with open impellers and horizontal multistage self-priming centrifugal pumps. This allows different requirements for flow rate, head, pumped liquid, materials and supply voltage to be matched to the application.
- Self-priming pumps for wells, water supply and pressure boosting
- Jet pumps with built-in ejector
- Multistage self-priming centrifugal pumps for higher delivery heads
- Liquid ring pumps for applications involving air or gas in the pumped liquid
- Open-impeller centrifugal pumps for clean or slightly dirty water
- Cast-iron, bronze and stainless-steel versions
- Single-phase and three-phase motor versions available
This category includes the Calpeda A, CA, MXA, NG, NGL and NGX series. When selecting the appropriate pump, the required flow rate, delivery head, suction lift, pumped liquid, material, connection size and supply voltage should be considered.
Items 1 - 7 of 7
- Construction: Self-priming flat well jet pump in block construction with built-in ejector
- Design: Cast iron version with pump housing and lantern from GJL 200
- Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 2,2 kW / 3 HP
- Rated current: 9,2 A at 230 V / 5,3 A at 400 V
- Rated speed: 2900 min-1
- Efficiency class: IE3
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 9,5 m3/h
- Maximum pump head according to the characteristic curve: 60 m
- Characteristic curve Q/H: 0 m3/h → 60 m; 0,5 m3/h → 59 m; 1 m3/h → 57,5 m; 1,5 m3/h → 56,5 m; 2 m3/h → 55 m; 2,5 m3/h → 54 m; 3 m3/h → 52,5 m; 3,5 m3/h → 51 m; 4 m3/h → 50 m; 4,5 m3/h → 48,5 m; 5 m3/h → 47 m; 5,5 m3/h → 45,5 m; 6 m3/h → 44 m; 6,5 m3/h → 42,5 m; 7 m3/h → 41,5 m; 8 m3/h → 38 m; 9 m3/h → 35 m; 9,5 m3/h → 34 m3/h
- Media temperature: to +40 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 10 bar
- Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
- Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 600 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm; w1 233 mm
- Article weight: 32,9 kg
- Materials: pump housing, cover and diffuser plate GJL 200; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
- Revision: BB
- Construction: Self-priming flat well jet pump in block construction with built-in ejector
- Design: Cast iron version with pump housing and lantern from GJL 200
- Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 2,2 kW / 3 HP
- Rated current: 9,2 A at 230 V / 5,3 A at 400 V
- Rated speed: 2900 min-1
- Efficiency class: IE3
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 6,5 m3/h
- Maximum pump head according to the characteristic curve: 77 m
- Characteristic curve Q/H: 0 m3/h → 77 m; 0,5 m3/h → 74,5 m; 1 m3/h → 71,5 m; 1,5 m3/h → 68,5 m; 2 m3/h → 65,5 m; 2,5 m3/h → 63 m; 3 m3/h → 60 m; 3,5 m3/h → 57,5 m; 4 m3/h → 55 m; 4,5 m3/h → 53 m; 5 m3/h → 51 m; 5,5 m3/h → 49 m; 6 m3/h → 47 m; 6,5 m3/h → 45 m3/h
- Media temperature: to +40 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 10 bar
- Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
- Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 600 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm; w1 233 mm
- Article weight: 32,9 kg
- Materials: pump housing, cover and diffuser plate GJL 200; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
- Revision: BB
- Construction: Self-priming flat well jet pump in block construction with built-in ejector
- Design: Cast iron version with pump housing and lantern from GJL 200
- Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 2,2 kW / 3 HP
- Rated current: 9,2 A at 230 V / 5,3 A at 400 V
- Rated speed: 2900 min-1
- Efficiency class: IE3
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: up to 4 m3/h
- Maximum pump head according to the characteristic curve: 95 m
- Characteristic curve Q/H: 0 m3/h → 95 m; 0,5 m3/h → 89 m; 1 m3/h → 83 m; 1,5 m3/h → 77 m; 2 m3/h → 72 m; 2,5 m3/h → 67 m; 3 m3/h → 62 m; 3,5 m3/h → 58 m; 4 m3/h → 54 m
- Media temperature: to +40 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 10 bar
- Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
- Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 600 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm; w1 233 mm
- Article weight: 32,9 kg
- Materials: pump housing, cover and diffuser plate GJL 200; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 430F/AISI 303; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
- Revision: BB
- Construction: Self-priming flat well jet pump in block construction with built-in ejector
- Design: Bronze version with pump housing and bronze lantern CC480K
- Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 2,2 kW / 3 HP
- Rated current: 9,2 A at 230 V / 5,3 A at 400 V
- Rated speed: 2900 min-1
- Efficiency class: IE3
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 9,5 m3/h
- Maximum pump head according to the characteristic curve: 60 m
- Characteristic curve Q/H: 0 m3/h → 60 m; 0,5 m3/h → 59 m; 1 m3/h → 57,5 m; 1,5 m3/h → 56,5 m; 2 m3/h → 55 m; 2,5 m3/h → 54 m; 3 m3/h → 52,5 m; 3,5 m3/h → 51 m; 4 m3/h → 50 m; 4,5 m3/h → 48,5 m; 5 m3/h → 47 m; 5,5 m3/h → 45,5 m; 6 m3/h → 44 m; 6,5 m3/h → 42,5 m; 7 m3/h → 41,5 m; 8 m3/h → 38 m; 9 m3/h → 35 m; 9,5 m3/h → 34 m3/h
- Media temperature: to +40 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 10 bar
- Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
- Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 600 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm; w1 233 mm
- Article weight: 36,6 kg
- Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
- Revision: BB
- Construction: Self-priming flat well jet pump in block construction with built-in ejector
- Design: Bronze version with pump housing and bronze lantern CC480K
- Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 2,2 kW / 3 HP
- Rated current: 9,2 A at 230 V / 5,3 A at 400 V
- Rated speed: 2900 min-1
- Efficiency class: IE3
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 6,5 m3/h
- Maximum pump head according to the characteristic curve: 77 m
- Characteristic curve Q/H: 0 m3/h → 77 m; 0,5 m3/h → 74,5 m; 1 m3/h → 71,5 m; 1,5 m3/h → 68,5 m; 2 m3/h → 65,5 m; 2,5 m3/h → 63 m; 3 m3/h → 60 m; 3,5 m3/h → 57,5 m; 4 m3/h → 55 m; 4,5 m3/h → 53 m; 5 m3/h → 51 m; 5,5 m3/h → 49 m; 6 m3/h → 47 m; 6,5 m3/h → 45 m3/h
- Media temperature: to +40 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 10 bar
- Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
- Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 600 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm; w1 233 mm
- Article weight: 36,6 kg
- Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
- Revision: BB
- Construction: Self-priming flat well jet pump in block construction with built-in ejector
- Design: Bronze version with pump housing and bronze lantern CC480K
- Applications: For well extraction, pressure increase, clean liquids or slightly contaminated surface water, garden watering and water jet cleaning
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 2,2 kW / 3 HP
- Rated current: 9,2 A at 230 V / 5,3 A at 400 V
- Rated speed: 2900 min-1
- Efficiency class: IE3
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: up to 4 m3/h
- Maximum pump head according to the characteristic curve: 95 m
- Characteristic curve Q/H: 0 m3/h → 95 m; 0,5 m3/h → 89 m; 1 m3/h → 83 m; 1,5 m3/h → 77 m; 2 m3/h → 72 m; 2,5 m3/h → 67 m; 3 m3/h → 62 m; 3,5 m3/h → 58 m; 4 m3/h → 54 m
- Media temperature: to +40 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 10 bar
- Connections according to ISO 228: suction side DN1 G 1 1/2; Pressure side DN2 G 1
- Dimensions: a 160 mm; a1 10 mm; b 40 mm; fM 600 mm; g1 11 mm; h1 165 mm; h2 57 mm; HD 240 mm; m1 60 mm; m3 10 mm; n1 215 mm; n2 175 mm; s 11.5 mm; w 115 mm; w1 233 mm
- Article weight: 36,6 kg
- Materials: Pump housing, cover and diffuser plate bronze CC480K; Brass impeller CW617N; Diffuser and nozzle Noryl PPO-GF20; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal
- Revision: BB
- Construction: Self-priming centrifugal pump of block construction with open impeller and integrated backflow preventer for automatic re-priming
- Design: Bronze version with pump housing and bronze lantern CC480K
- Applications: For clean or easily polluted water; solids up to 10 mm at A 40/A 50 and up to 15 mm at A 65/A 80; For drainage, irrigation and municipal and industrial applications
- Engine: 2-poleer three-phase induction motor
- Rated voltage: 230 V / 400 V ±10 %, 50 Hz
- Engine rated power P2: 2,2 kW / 3 HP
- Rated current: 11,5 A at 230 V / 6,6 A at 400 V
- Rated speed: 2900 min-1
- Efficiency class: IE3
- Degree of protection: IP54
- Insulation class: F
- Operation mode: Continuous operation
- Flow according to characteristic curve: to 48 m3/h
- Maximum pump head according to the characteristic curve: 18,8 m
- Characteristic curve Q/H: 0 m3/h → 18,8 m; 15 m3/h → 17,5 m; 18 m3/h → 17 m; 24 m3/h → 16 m; 30 m3/h → 14 m; 33 m3/h → 13 m; 36 m3/h → 11,5 m; 42 m3/h → 9 m; 48 m3/h → 6,5 m3/h
- Media temperature: -10 to +90 °C
- Maximum ambient temperature: to 40 °C
- Maximum permissible working pressure: 6 bar; A 80-170 to 10 bar
- Connections according to ISO 228: suction side DN1 G 2 1/2; Pressure side DN2 G 2 1/2
- Dimensions: a 172 mm; b 50 mm; fM 583 mm; g1 12 mm; h1 293 mm; h2 75 mm; HD 260 mm; l1 115 mm; l2 121 mm; m1 125 mm; m2 95 mm; n1 240 mm; n2 190 mm; n3 47 mm; s 16 mm; w 319 mm
- Article weight: 52,5 kg
- Materials: pump housing, suction housing and impeller bronze CC480K; shaft AISI 316; Slip ring seal carbon/ceramic/NBR
- Design according to: EN 60034-1; EN 60034-30-1; EN 60335-1; EN 60335-2-41
- Options on request: other voltages; 60 Hz; IP55; Special sliding ring seal; higher or lower media or ambient temperatures; Embodiment with bearing carrier
- Revision: BB
Items 1 - 7 of 7