PDC DC motors
permanent-magnet DC motor
power : 0,55 kW
frame size : IEC 71
shaft : 14j6 x 30 mm with key
cooling : self-ventilated
degree of protection: IP44
duty : S1 (100%)
connection: with terminal box at 180V / only with terminal studs at 24V
available versions
-------------------------------------------
voltage : 24 | 180 V
current : 29 | 3,8 A
speed : 1500 | 1800 | 2400
torque: 3,5 | 2,92 | 2,20
The inrush current may need to be limited under load; otherwise the permanent magnets may be damaged. Our converters or battery-motor controllers can be used for this purpose.
power : 0,75 kW
frame size : IEC 71
shaft : 14j6 x 30 mm with key
degree of protection: IP44
duty : S1 (100%), but at 1500 & 1700 min-1 S2-30 Min.
connection: with terminal box at 180V / only with terminal studs at 24V
available versions
-------------------------------------------
voltage : 24 | 180 V
current : 39 | 5,2 A
speed : 1500 | 1800 | 2400 | 3000 min-1
torque: 4,7 | 3,98 | 2,90 | 2,39 Nm
The inrush current must be limited under load; otherwise the permanent magnets may be damaged. Our converters or battery-motor controllers can be used for this purpose.
permanent-magnet DC motor
power : 1,1 kW
frame size : IEC 71
shaft : 14j6 x 30 mm with key
cooling : self-ventilated
degree of protection: IP44
duty : S1 (100%)
connection: with terminal box at 180V / only with terminal studs at 24V
flange : currently available only in B5
available versions
-------------------------------------------
voltage : 180 V
current : 7,6 A
speed : 2400 min-1
torque: 4,30 Nm
Our converters can be used for speed control.
power : 0,37 kW
frame size : IEC 71
shaft : 14j6 x 30 mm with key
cooling : self-ventilated
degree of protection: IP44
duty : S1 (100%)
connection: mit with terminal box at 180V / only with terminal studs at 24V
available versions
-------------------------------------------
voltage : 24 | 180 V
current : 19 | 2,6 A
speed : 1500 | 2400
torque: 2,3 | 1,40
The inrush current may need to be limited under load; otherwise the permanent magnets may be damaged. Our converters or battery-motor controllers can be used for this purpose.