ORIENTAL MOTOR
Items 521 - 560 of 1360
EZSM4CLE075ARAC AR series (step motor) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 Single shaft / without Electromagnetic brake AC supply (100–240 VAC depending on the driver)
EZSM4CLE075ARAK AR series (step motor) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
EZSM4CLE075ARMC AR series (step motor) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 With Electromagnetic brake AC supply (100–240 VAC depending on driver)
EZSM4CLE075ARMK AR series (step motor) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
EZSM4CLE075AZAC AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 Single shaft / without Electromagnetic brake AC supply (100–240 VAC depending on the driver)
EZSM4CLE075AZAK AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
EZSM4CLE075AZMC AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 With Electromagnetic brake AC supply (100–240 VAC depending on driver)
EZSM4CLE075AZMK AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
EZSM4CLE080ARAC AR series (step motor) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 Single shaft / without Electromagnetic brake AC supply (100–240 VAC depending on the driver)
EZSM4CLE080ARAK AR series (step motor) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
EZSM4CLE080ARMC AR series (step motor) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 With Electromagnetic brake AC supply (100–240 VAC depending on driver)
EZSM4CLE080ARMK AR series (step motor) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
EZSM4CLE080AZAC AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 Single shaft / without Electromagnetic brake AC supply (100–240 VAC depending on the driver)
EZSM4CLE080AZAK AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
EZSM4CLE080AZMC AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 With Electromagnetic brake AC supply (100–240 VAC depending on driver)
EZSM4CLE080AZMK AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
EZSM4CLE085ARAC AR series (step motor) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 Single shaft / without Electromagnetic brake AC supply (100–240 VAC depending on the driver)
EZSM4CLE085ARAK AR series (step motor) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
EZSM4CLE085ARMC AR series (step motor) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 With Electromagnetic brake AC supply (100–240 VAC depending on driver)
EZSM4CLE085ARMK AR series (step motor) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
EZSM4CLE085AZAC AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 Single shaft / without Electromagnetic brake AC supply (100–240 VAC depending on the driver)
EZSM4CLE085AZAK AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
EZSM4CLE085AZMC AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 With Electromagnetic brake AC supply (100–240 VAC depending on driver)
EZSM4CLE085AZMK AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 50 mm clean room, air connection left slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
Description of Specification Items
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46AC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 50 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: -
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 2.0 kg
* This is done by motor product name, not by actuator product name.
[Note]
• For products with a 12 mm lead, when performing a Push-Motion return-to-home on the rising side with a transportable mass of 4 kg or more, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SAK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 50 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: -
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 2.0 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• For products with a 12mm lead, when performing a Push-Motion return-to-home on the rising side with a transportable mass of 4 kg or more, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
EZSM4D005ARMC AR series (step motor) Width 74 mm × Height 50 mm Inline (standard) Slope mm: 12 Electromagnetic brake AC power supply (100–240 VAC depending on driver)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 50 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 2.2 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• For products with a 12mm lead, when performing a Push-Motion return-to-home on the rising side with a transportable mass of 4 kg or more, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46AC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 50 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: -
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 2.0 kg
* This is done by motor product name, not by actuator product name.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46AK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 50 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: -
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 2.0 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46MC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 50 mm
- Electromagnetic brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 2.2 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the Electromagnetic brake is the same value as the holding force.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46MK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 50 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 2.2 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46AC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 100 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: -
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 2.3 kg
* This is done by motor product name, not by actuator product name.
[Note]
• For products with a 12 mm lead, when performing a Push-Motion return-to-home on the rising side with a transportable mass of 4 kg or more, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
EZSM4D010ARAK AR series (step motor) Width 74 mm × Height 50 mm Inline (standard) Slope mm: 12 single shaft / without electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46MC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 100 mm
- Electromagnetic brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 800 mm/s
- Electromagnetic brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 2.4 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the Electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input Version, a separate power supply for the Electromagnetic brakes is required for the product with an Electromagnetic brake.
[Note]
• For products with a 12 mm lead, when performing a Push-Motion return-to-home on the rising side with a transportable mass of 4 kg or more, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input Version has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 100 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 2.4 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• For products with a 12mm lead, when performing a Push-Motion return-to-home on the rising side with a transportable mass of 4 kg or more, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
EZSM4D010AZAC AZ series (closed loop, absolute Encoder) width 74 mm × height 50 mm inline (standard) slope mm: 12 Single shaft / without Electromagnetic brake AC supply (100–240 VAC depending on the driver)
EZSM4D010AZAK AZ series (closed loop, absolute encoder) width 74 mm × height 50 mm inline (standard) slope mm: 12 single shaft / without electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46MC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 100 mm
- Electromagnetic brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 2.4 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the Electromagnetic brake is the same value as the holding force.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46MK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 100 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 2.4 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
Items 521 - 560 of 1360