ORIENTAL MOTOR
Items 691 - 720 of 1495
Description of Specification Items
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46AK
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 550 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: -
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 3.1 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 600 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: ~3.5 kg
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 550 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.4 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
EZSM3LD060AZAK AZ series (closed loop, absolute encoder) width 54 mm × height 50 mm Parallel motor left (reversed left) slope mm: 12 single shaft / without electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 550 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~86 N
- Push Force: 200 N
- Holding Force: 125 N ※1
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 300 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.3 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
EZSM3LE055AZAK AZ series (closed loop, absolute encoder) width 54 mm × height 50 mm Parallel motor left (reversed left) slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 600 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~86 N
- Push Force: 200 N
- Holding Force: 125 N ※1
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 270 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.4 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46AK
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 600 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: -
- Thrust: ~86 N
- Push Force: 200 N
- Holding Force: 125 N
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 270 mm/s
- Actuator part Mass: 3.2 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
EZSM3RD055ARMK AR series (step motor) Width 54 mm × Height 50 mm Parallel motor right (reversed right) Slope mm: 12 With electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46AK
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 550 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: -
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 3.1 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 600 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: ~3.5 kg
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 550 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.4 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46AK
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 600 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: -
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 550 mm/s
- Actuator part Mass: 3.2 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
EZSM3RE055ARMK AR series (step motor) Width 54 mm × Height 50 mm Parallel motor right (reversed right) Slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
EZSM3RE055AZAK AZ series (closed loop, absolute encoder) Width 54 mm × Height 50 mm Parallel motor right (reversed right) Slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 600 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~86 N
- Push Force: 200 N
- Holding Force: 125 N ※1
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 270 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.4 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
EZSM3RE060AZAK AZ series (closed loop, absolute encoder) Width 54 mm × Height 50 mm Parallel motor right (reversed right) Slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
EZSM4D025ARMK AR series (step motor) Width 74 mm × Height 50 mm Inline (standard) Slope mm: 12 With electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 300 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.3 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• For products with a 12mm lead, when performing a Push-Motion return-to-home on the rising side with a transportable mass of 4 kg or more, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 250 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~14 kg
- Thrust: ~140 N
- Push Force: 200 N
- Holding Force: 140 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 300 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.1 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
EZSM4E030ARMK AR series (step motor) Width 74 mm × Height 50 mm Inline (standard) Slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
EZSM4LD025ARMK AR series (step motor) Width 74 mm × Height 50 mm Parallel motor left (reversed left) Slope mm: 12 With electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 300 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.3 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• For products with a 12mm lead, when performing a Push-Motion return-to-home on the rising side with a transportable mass of 4 kg or more, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 250 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~12.5 kg
- Thrust: ~125 N
- Push Force: 200 N
- Holding Force: 125 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 300 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.1 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 300 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~12.5 kg
- Thrust: ~125 N
- Push Force: 200 N
- Holding Force: 125 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 300 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.3 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 250 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.1 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• For products with a 12mm lead, when performing a Push-Motion return-to-home on the rising side with a transportable mass of 4 kg or more, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 300 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.3 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• For products with a 12mm lead, when performing a Push-Motion return-to-home on the rising side with a transportable mass of 4 kg or more, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
EZSM4RE025ARMK AR series (step motor) Width 74 mm × Height 50 mm Parallel motor right (reversed right) Slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 300 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~12.5 kg
- Thrust: ~125 N
- Push Force: 200 N
- Holding Force: 125 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 300 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.3 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46AK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: -
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 3.4 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46AK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 400 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: -
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 3.6 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46AK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~140 N
- Push Force: 200 N
- Holding Force: 140 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 3.4 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
Items 691 - 720 of 1495