ORIENTAL MOTOR
Items 1461 - 1480 of 1496
Description of technical specifications
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46MC
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 450 mm
- Electromagnetic brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: ~3.5 kg
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 2.9 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the Electromagnetic brake is the same value as the holding force.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
EZSM3D045AZAC AZ series (closed loop, absolute Encoder) width 54 mm × height 50 mm inline (standard) slope mm: 12 Single shaft / without Electromagnetic brake AC supply (100–240 VAC depending on the driver)
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46MC
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 450 mm
- Electromagnetic brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: ~3.5 kg
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 800 mm/s
- Electromagnetic brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.0 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the Electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input Version, a separate power supply for the Electromagnetic brakes is required for the product with an Electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input Version has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46AC
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 450 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: -
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 2.8 kg
* This is done by motor product name, not by actuator product name.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
EZSM3D040AZMC AZ series (closed loop, absolute Encoder) width 54 mm × height 50 mm inline (standard) slope mm: 12 Electromagnetic brake AC power supply (100–240 VAC depending on driver)
EZSM3D040AZAC AZ series (closed loop, absolute Encoder) width 54 mm × height 50 mm inline (standard) slope mm: 12 Single shaft / without Electromagnetic brake AC supply (100–240 VAC depending on the driver)
EZSM3D040ARMC AR series (step motor) Width 54 mm × Height 50 mm Inline (standard) Slope mm: 12 Electromagnetic brake AC power supply (100–240 VAC depending on driver)
EZSM3D040ARAC AR series (step motor) Width 54 mm × Height 50 mm Inline (standard) Slope mm: 12 Single shaft / without Electromagnetic brake AC supply (100–240 VAC depending on the driver)
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46MC
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: ~3.5 kg
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 2.6 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the Electromagnetic brake is the same value as the holding force.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46AC
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: -
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 2.5 kg
* This is done by motor product name, not by actuator product name.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
EZSM3D035ARMC AR series (step motor) Width 54 mm × Height 50 mm Inline (standard) Slope mm: 12 Electromagnetic brake AC power supply (100–240 VAC depending on driver)
EZSM3D035ARAC AR series (step motor) Width 54 mm × Height 50 mm Inline (standard) Slope mm: 12 Single shaft / without Electromagnetic brake AC supply (100–240 VAC depending on the driver)
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46MC
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 300 mm
- Electromagnetic brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: ~3.5 kg
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 2.5 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the Electromagnetic brake is the same value as the holding force.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46AC
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 300 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: -
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 2.3 kg
* This is done by motor product name, not by actuator product name.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46MC
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 300 mm
- Electromagnetic brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: ~3.5 kg
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 800 mm/s
- Electromagnetic brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 2.5 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the Electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input Version, a separate power supply for the Electromagnetic brakes is required for the product with an Electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input Version has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46AC
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 300 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: -
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 2.4 kg
* This is done by motor product name, not by actuator product name.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46MC
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 250 mm
- Electromagnetic brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: ~3.5 kg
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 2.3 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the Electromagnetic brake is the same value as the holding force.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46AC
- Linear Slide Size: Width 54 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 250 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~7.5 kg
- Transportable Mass Vertical: -
- Thrust: ~43 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 4.2 N·m, MY: 4.2 N·m, MR: 10.5 N·m
- Static Permissible Moment: MP: 26.4 N·m, MY: 26.4 N·m, MR: 52.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 2.2 kg
* This is done by motor product name, not by actuator product name.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
EZSM3D025ARMC AR series (step motor) Width 54 mm × Height 50 mm Inline (standard) Slope mm: 12 Electromagnetic brake AC power supply (100–240 VAC depending on driver)
EZSM3D025ARAC AR series (step motor) Width 54 mm × Height 50 mm Inline (standard) Slope mm: 12 Single shaft / without Electromagnetic brake AC supply (100–240 VAC depending on the driver)
Items 1461 - 1480 of 1496