ORIENTAL MOTOR
Items 481 - 520 of 522
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
2IK6GN-CW2J general-purpose motor WK2 series
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• Description of Specification Items
• The product name written on the motor nameplate is 2IK6A-AW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 100 VAC capacitor included (this product)
U: single-phase 110 VAC/115 VAC capacitor included. (2IK6A-AW2U)
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.199 A
single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
2IK6GN-AW2J general-purpose motor WK2 series
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.119 A
single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 47 mN·m
single-Phase 200 VAC / 60 Hz: 48 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 52 mN·m / 1100 r/min
single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - capacitor: Product name: CH10BFAUL, Capacity: 1.0 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.75 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.220 A
single-Phase 115 VAC / 60 Hz / 0.225 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 40 mN·m
single-Phase 115 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 39 mN·m / 1490 r/min
single-Phase 115 VAC / 60 Hz: 39 mN·m / 1490 r/min - capacitor: Product name: CH30FAUL2, Capacity: 3.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.75 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.119 A
single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 47 mN·m
single-Phase 200 VAC / 60 Hz: 48 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 52 mN·m / 1100 r/min
single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - capacitor: Product name: CH10BFAUL, Capacity: 1.0 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.75 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.220 A
single-Phase 115 VAC / 60 Hz / 0.225 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 40 mN·m
single-Phase 115 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 39 mN·m / 1490 r/min
single-Phase 115 VAC / 60 Hz: 39 mN·m / 1490 r/min - capacitor: Product name: CH30FAUL2, Capacity: 3.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.75 kg
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.239 A
single-Phase 100 VAC / 60 Hz / 0.263 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m
single-Phase 100 VAC / 60 Hz: 50 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 52 mN·m / 1100 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - capacitor: Product name: CH40FAUL2, Capacity: 4.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.75 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.239 A
single-Phase 100 VAC / 60 Hz / 0.263 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m
single-Phase 100 VAC / 60 Hz: 50 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 52 mN·m / 1100 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - capacitor: Product name: CH40FAUL2, Capacity: 4.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.75 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 220 VAC / 50 Hz / 0.103 A
single-Phase 220 VAC / 60 Hz / 0.091 A
single-Phase 230 VAC / 50 Hz / 0.107 A
single-Phase 230 VAC / 60 Hz / 0.094 A - Starting Torque (Motor Shaft): single-Phase 220 VAC / 50 Hz: 38 mN·m
single-Phase 220 VAC / 60 Hz: 40 mN·m
single-Phase 230 VAC / 50 Hz: 45 mN·m
single-Phase 230 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 220 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 220 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 230 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 230 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH06BFAUL, Capacity: 0.6 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 220 VAC / 50 Hz / 0.106 A
single-Phase 220 VAC / 60 Hz / 0.099 A
single-Phase 230 VAC / 50 Hz / 0.111 A
single-Phase 230 VAC / 60 Hz / 0.100 A - Starting Torque (Motor Shaft): single-Phase 220 VAC / 50 Hz: 38 mN·m
single-Phase 220 VAC / 60 Hz: 40 mN·m
single-Phase 230 VAC / 50 Hz: 45 mN·m
single-Phase 230 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 220 VAC / 50 Hz: 46 mN·m / 1150 r/min
single-Phase 220 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 230 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 230 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH06BFAUL, Capacity: 0.6 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.179 A
single-Phase 115 VAC / 60 Hz / 0.184 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 40 mN·m
single-Phase 115 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH25FAUL2, Capacity: 2.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.185 A
single-Phase 115 VAC / 60 Hz / 0.189 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 40 mN·m
single-Phase 115 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH25FAUL2, Capacity: 2.5 µF, Rated voltage: 250 VAC
- Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.097 A
single-Phase 200 VAC / 60 Hz / 0.096 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 40 mN·m
single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 50 mN·m / 1200 r/min
single-Phase 200 VAC / 60 Hz: 40 mN·m / 1450 r/min - capacitor: Product name: CH075BFAUL, Capacity: 0.75 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.102 A
single-Phase 200 VAC / 60 Hz / 0.100 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 40 mN·m
single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 50 mN·m / 1200 r/min
single-Phase 200 VAC / 60 Hz: 40 mN·m / 1450 r/min - capacitor: Product name: CH075BFAUL, Capacity: 0.75 µF, Rated voltage: 450 VAC
- Mass: 0.7 kg
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.189 A
single-Phase 100 VAC / 60 Hz / 0.192 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 40 mN·m / 1450 r/min - capacitor: Product name: CH30FAUL2, Capacity: 3.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft
- Shaft Material: iron
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.194 A
single-Phase 100 VAC / 60 Hz / 0.197 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 40 mN·m / 1450 r/min - capacitor: Product name: CH30FAUL2, Capacity: 3.0 µF, Rated voltage: 250 VAC
- Mass: 0.7 kg
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 60 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Items 481 - 520 of 522