ORIENTAL MOTOR
Items 101 - 150 of 176
Description of Specification Items
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46AC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: -
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 3.4 kg
* This is done by motor product name, not by actuator product name.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
EZSM4RD035AZAK AZ series (closed loop, absolute encoder) Width 74 mm × Height 50 mm Parallel motor right (reversed right) Slope mm: 12 single shaft / without electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46MC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic brake: Equipped
- Motor Installation Direction: Reversed Motor Version (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 3.5 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the Electromagnetic brake is the same value as the holding force.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46MK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 3.5 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46AC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~125 N
- Push Force: 200 N
- Holding Force: 125 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 400 mm/s
- Actuator part Mass: 3.4 kg
* This is done by motor product name, not by actuator product name.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SAK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~125 N
- Push Force: 200 N
- Holding Force: 125 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 3.4 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46MC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~12.5 kg
- Thrust: ~125 N
- Push Force: 200 N
- Holding Force: 125 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 400 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.6 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~12.5 kg
- Thrust: ~125 N
- Push Force: 200 N
- Holding Force: 125 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 300 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 3.6 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46AC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~125 N
- Push Force: 200 N
- Holding Force: 125 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 400 mm/s
- Actuator part Mass: 3.4 kg
* This is done by motor product name, not by actuator product name.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46AK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~125 N
- Push Force: 200 N
- Holding Force: 125 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 3.4 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46MC
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~12.5 kg
- Thrust: ~125 N
- Push Force: 200 N
- Holding Force: 125 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 400 mm/s
- Actuator part Mass: 3.5 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46MK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~12.5 kg
- Thrust: ~125 N
- Push Force: 200 N
- Holding Force: 125 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 3.5 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
EZSM6CLD035ARAC AR series (step motor) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 12 Single shaft / without Electromagnetic brake AC supply (100–240 VAC depending on the driver)
EZSM6CLD035ARAK AR series (step motor) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 12 single shaft / without electromagnetic brake DC supply (24/48 VDC)
EZSM6CLD035ARMC AR series (step motor) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 12 Electromagnetic brake AC power supply (100–240 VAC depending on driver)
EZSM6CLD035ARMK AR series (step motor) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 12 With electromagnetic brake DC supply (24/48 VDC)
EZSM6CLD035AZAC AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 12 Single shaft / without Electromagnetic brake AC supply (100–240 VAC depending on the driver)
EZSM6CLD035AZAK AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 12 single shaft / without electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66MC
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Air Coupler for Suction Direction: Left direction
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~15 kg
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 5.7 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the Electromagnetic brake is the same value as the holding force.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66MK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Air Coupler for Suction Direction: Left direction
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~15 kg
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 5.7 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66AC
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Air Coupler for Suction Direction: Left direction
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: -
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 400 mm/s
- Actuator part Mass: 5.3 kg
* This is done by motor product name, not by actuator product name.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66SAK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Air Coupler for Suction Direction: Left direction
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: -
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 5.3 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66MC
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Air Coupler for Suction Direction: Left direction
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: ~30 kg
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 400 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.25 A min.
- Actuator part Mass: 5.6 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
EZSM6CLE035ARMK AR series (step motor) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
EZSM6CLE035AZAC AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 6 Single shaft / without Electromagnetic brake AC supply (100–240 VAC depending on the driver)
EZSM6CLE035AZAK AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
EZSM6CLE035AZMC AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 6 With Electromagnetic brake AC supply (100–240 VAC depending on driver)
EZSM6CLE035AZMK AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66AC
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 5.3 kg
* This is done by motor product name, not by actuator product name.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66SAK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 5.3 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
EZSM6D035ARMC AR series (step motor) Width 74 mm × Height 66,5 mm Inline (standard) Slope mm: 12 Electromagnetic brake AC power supply (100–240 VAC depending on driver)
EZSM6D035ARMK AR series (step motor) Width 74 mm × Height 66,5 mm Inline (standard) Slope mm: 12 With electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66AC
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 5.3 kg
* This is done by motor product name, not by actuator product name.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
EZSM6D035AZAK AZ series (closed loop, absolute encoder) width 74 mm × height 66,5 mm inline (standard) slope mm: 12 single shaft / without electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66MC
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~15 kg
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 5.7 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the Electromagnetic brake is the same value as the holding force.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66MK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~15 kg
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 5.7 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66AC
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: -
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 400 mm/s
- Actuator part Mass: 5.3 kg
* This is done by motor product name, not by actuator product name.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
EZSM6E035ARAK AR series (step motor) Width 74 mm × Height 66,5 mm Inline (standard) Slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
EZSM6E035ARMC AR series (step motor) Width 74 mm × Height 66,5 mm Inline (standard) Slope mm: 6 With Electromagnetic brake AC supply (100–240 VAC depending on driver)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66SMK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: ~30 kg
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 300 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.25 A min.
- Actuator part Mass: 5.6 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66AC
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: -
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 400 mm/s
- Actuator part Mass: 5.3 kg
* This is done by motor product name, not by actuator product name.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66AK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: -
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 5.3 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66MC
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: ~30 kg
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 400 mm/s
- Actuator part Mass: 5.7 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66MK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 6 mm
- Stroke: 350 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: ~30 kg
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 5.7 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66AC
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 5.3 kg
* This is done by motor product name, not by actuator product name.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66SAK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 5.3 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66MC
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic brake: Equipped
- Motor Installation Direction: Reversed Motor Version (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~15 kg
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 800 mm/s
- Electromagnetic brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic brake Power Supply Input Current: 0.25 A min.
- Actuator part Mass: 5.6 kg
* This is done by motor product name, not by actuator product name.
※1 The holding force of the Electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input Version, a separate power supply for the Electromagnetic brakes is required for the product with an Electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input Version has a pushing operation function, but does not have a push-motion return-to-home operation.
EZSM6LD035ARMK AR series (step motor) Width 74 mm × Height 66,5 mm Parallel motor left (reversed left) Slope mm: 12 With electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: AC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66AC
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 800 mm/s
- Actuator part Mass: 5.3 kg
* This is done by motor product name, not by actuator product name.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66AK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 12 mm
- Stroke: 350 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 5.3 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
Items 101 - 150 of 176