Motor
Items 1 - 20 of 708
Out of stock
BLS Series, brushless DC motor, 24 VDC, 30 W, frame size 60 mm, IP65, round shaft, 100–4000 rpm; supplied without driver or connection cable.
Out of stock
BLS Series, brushless DC motor, 24 VDC, 30 W, frame size 60 mm, IP65, GF pinion shaft for GFV2/GFS2 gearheads, 100–4000 rpm; supplied without driver or connection cable.
Out of stock
BLS Series, brushless DC motor, 24 VDC, 25 W, frame size 80 mm, IP40, GN pinion shaft for 4GN gearheads, 100–2000 rpm; supplied without driver or connection cable.
Out of stock
BLS Series, brushless DC motor, 24 VDC, 60 W, frame size 80 mm, IP65, round shaft, 100–4000 rpm; supplied without driver or connection cable.
Out of stock
BLS Series, brushless DC motor, 24 VDC, 60 W, frame size 80 mm, IP65, GF pinion shaft for GFV4/GFS4 gearheads, 100–4000 rpm; supplied without driver or connection cable.
Out of stock
BLS Series, brushless DC motor, 24 VDC, 120 W, frame size 90 mm, IP65, round shaft, 100–4000 rpm; supplied without driver or connection cable.
Out of stock
BLS Series, brushless DC motor, 24 VDC, 120 W, frame size 90 mm, IP65, GF pinion shaft for GFV5/GFS5 gearheads, 100–4000 rpm; supplied without driver or connection cable.
Out of stock
BLS Series, brushless DC motor, 24 VDC, 40 W, frame size 90 mm, IP40, GN pinion shaft for 5GN gearheads, 100–2000 rpm; supplied without driver or connection cable.
Out of stock
BLS Series, brushless DC motor, 24 VDC, 90 W, Frame size 90 mm, IP40, GE pinion shaft for 5GE gearheads, 100–2000 rpm; supplied without driver or connection cable.
- Frame size: 90 mm
- Rated output power: 90 W
- Shaft/gear type: pinion shaft
- Rotor inertia J: 0.62×10-4 kg·m2
BLS Series, IE5 brushless permanent-magnet motor, 200–240 VAC, 750 W, 3-phase, frame size 104 mm, IP66, pinion shaft for combination with a 6GR gearhead; supplied without gearhead, driver or connection cable.
Out of stock
BLS Series, IE5 brushless permanent-magnet motor, 200–240 VAC, 750 W, 3-phase, frame size 104 mm, IP66, round shaft with key; supplied without driver or connection cable.
BLE23AC100F brushless DC motor (AC) BLE series
Description of Specification Items.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type parallel-shaft gearhead
- Gear Ratio: 100
- Electromagnetic Brake: Not Equipped
- Included cable: Not included
- Power Supply Input Rated Voltage: single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 6 N·m (0.8–30 r/min)
5.4 N·m (40 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 0.8–40 r/min
- Permissible Inertia J: 2500×10-4 kg·m2
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 155×10-4 kg·m2
- Rotor Inertia J: 0.087×10-4 kg·m2
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- gearhead Mass: 0.33 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft gearhead
- Gear Ratio: 10
- Electromagnetic Brake: Not Equipped
- Included cable: Not included
- Power Supply Input Rated Voltage: single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 0.85 N·m (8–300 r/min)
0.64 N·m (400 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 8–400 r/min
- Permissible Inertia J: 50×10-4 kg·m2
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 6.2×10-4 kg·m2
- Rotor Inertia J: 0.087×10-4 kg·m2
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
BLE23AC10S brushless DC motor (AC) BLE series
BLE23AC15F brushless DC motor (AC) BLE series
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type parallel-shaft gearhead
- Gear Ratio: 15
- Electromagnetic Brake: Not Equipped
- Included cable: Not included
- Power Supply Input Rated Voltage: single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 1.4 N·m (5.3–200 r/min)
1.0 N·m (267 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 5.3–267 r/min
- Permissible Inertia J: 110×10-4 kg·m2
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 14×10-4 kg·m2
- Rotor Inertia J: 0.087×10-4 kg·m2
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- gearhead Mass: 0.28 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft gearhead
- Gear Ratio: 200
- Electromagnetic Brake: Not Equipped
- Included cable: Not included
- Power Supply Input Rated Voltage: single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 17 N·m (0.4–15 r/min)
12.8 N·m (20 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 0.4–20 r/min
- Permissible Inertia J: 5000×10-4 kg·m2
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 155×10-4 kg·m2
- Rotor Inertia J: 0.087×10-4 kg·m2
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
BLE23AC200S brushless DC motor (AC) BLE series
- Frame Size: 60 mm
- Rated Output Power: 30 W
- Shaft/Gear Type: Combination Type Hollow Shaft gearhead
- Gear Ratio: 20
- Electromagnetic Brake: Not Equipped
- Included cable: Not included
- Power Supply Input Rated Voltage: single-Phase 100–120 VAC
- Power Supply Input Permissible Voltage Range: -15–+10%
- Power Supply Input Rated Frequency: 50/60 Hz
- Power Supply Input Permissible Frequency Range: ±5%
- Power Supply Input Rated Input Current: 1.3 A
- Power Supply Input Maximum Input Current: 3.5 A
- Control Power Supply Voltage: 24 VDC
- Control Power Supply Permissible Voltage Range: -15–+20%
- Rating Torque (Motor Shaft): 0.1 N·m
- Maximum Instantaneous Torque (Motor Shaft): 0.2 N·m *1
- Permissible Torque: 1.7 N·m (4–150 r/min)
1.3 N·m (200 r/min) - Rated Speed (Motor Shaft): 3000 r/min
- Speed Control Range: 4–200 r/min
- Permissible Inertia J: 200×10-4 kg·m2
- Permissible Inertia J (At Instantaneous Stop, Instantaneous Bidirectional Operation): 24.8×10-4 kg·m2
- Rotor Inertia J: 0.087×10-4 kg·m2
- Speed Regulation (Load): ±0.2% or less: conditions 0–Rated Torque, Rated Speed, Rated Voltage, Normal Ambient Temperature
- Speed Regulation (Voltage): ±0.2% or less: Conditions Rated Voltage -15~＋10%, Rated Speed, No load, Normal Ambient Temperature
- Speed Regulation (Temperature): ±0.2% or less: conditions 0~＋50°C, Rated Speed, No load, Rated Voltage
- Motor Section Mass: 0.6 kg
- gearhead Mass: 0.8 kg
- Circuit Mass: 0.7 kg
*1 Maximum instantaneous torque can be used for approximately 5 seconds or less.
Items 1 - 20 of 708