Motor braking device

The DC electronic brake VersiBrake [40 – 600 A] serves for the rapid, safe and wear-free braking of three-phase motors. It is microcontroller-controlled, designed for industrial continuous operation and ensures uniform, reproducible braking behavior. Thanks to its modular design and integrated brake protector (up to 60 A), the VersiBrake series can be easily integrated into existing systems.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing plants
• Free from wear and maintenance
• Brake protector integrated (for devices up to 60 A)
• Degree of protection IP 20

Functions

• Control via motor contactor
• Stationary or time-dependent braking
• Brake time-out monitoring
• Brake current setting 0 – 100 %, current control
• Automatic remanence time optimization
• Braking times 0,5 – 320 s
• Temperature monitoring of the heat sink
• Value-free reporting and tax outputs
• 2. Brake time 0,5 – 40 s selectable
• Manually selectable brake stop

Options

The following option packages are available:

VersiBrake 230/400-40... 600 (APC package):

• Brake current indicator
• Pluggable control terminals
• Engine PTC monitoring
• Star-triangle start-up control
• Standstill signalling relays
• Brake current monitoring

VersiBrake 600-40... 600 UL (APBC package):

• All options as in the “APC package”
• Wide Voltage Capacity 200 – 600 V
• Further control voltages on request

Technical data (excerpt)

• Mains voltage according to DIN EN 50160 (IEC 38): 220/240 V ± 10 % or 380/415 V ± 10 % – 50/60 Hz
• Nominal equipment power: 40 A / 60 A / 100 A / 200 A / 400 A / 600 A
• Brake current control 0 – 220 V DC
• Braking time 0,5 – 320 s
• Relay contact load capacity: 3 A / 250 VAC and 30 VDC
• Maximum connection section up to 35 mm2 (depending on type)
• Ambient temperature 0 – 45 °C / Bearing – 25 – 75 °C
• Weight approximately 2,1 – 10,2 kg

Preferred areas of application

• Fans and fans
• Stirrers and centrifuges
• Sawing and handling equipment
• Machinery for working wood and metal
• Grinding machines and high-load drives

Note:

When using IE3-Motoren, higher starting and braking currents must be taken into account. We recommend that soft start and brake devices should in principle be dimensioned one higher power level.

The DC electronic brake VersiBrake [40 – 600 A] serves for the rapid, safe and wear-free braking of three-phase motors. It is microcontroller-controlled, designed for industrial continuous operation and ensures uniform, reproducible braking behavior. Thanks to its modular design and integrated brake protector (up to 60 A), the VersiBrake series can be easily integrated into existing systems.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing plants
• Free from wear and maintenance
• Brake protector integrated (for devices up to 60 A)
• Degree of protection IP 20

Functions

• Control via motor contactor
• Stationary or time-dependent braking
• Brake time-out monitoring
• Brake current setting 0 – 100 %, current control
• Automatic remanence time optimization
• Braking times 0,5 – 320 s
• Temperature monitoring of the heat sink
• Value-free reporting and tax outputs
• 2. Brake time 0,5 – 40 s selectable
• Manually selectable brake stop

Options

The following option packages are available:

VersiBrake 230/400-40... 600 (APC package):

• Brake current indicator
• Pluggable control terminals
• Engine PTC monitoring
• Star-triangle start-up control
• Standstill signalling relays
• Brake current monitoring

VersiBrake 600-40... 600 UL (APBC package):

• All options as in the “APC package”
• Wide Voltage Capacity 200 – 600 V
• Further control voltages on request

Technical data (excerpt)

• Mains voltage according to DIN EN 50160 (IEC 38): 220/240 V ± 10 % or 380/415 V ± 10 % – 50/60 Hz
• Nominal equipment power: 40 A / 60 A / 100 A / 200 A / 400 A / 600 A
• Brake current control 0 – 220 V DC
• Braking time 0,5 – 320 s
• Relay contact load capacity: 3 A / 250 VAC and 30 VDC
• Maximum connection section up to 35 mm2 (depending on type)
• Ambient temperature 0 – 45 °C / Bearing – 25 – 75 °C
• Weight approximately 2,1 – 10,2 kg

Preferred areas of application

• Fans and fans
• Stirrers and centrifuges
• Sawing and handling equipment
• Machinery for working wood and metal
• Grinding machines and high-load drives

Note:

When using IE3-Motoren, higher starting and braking currents must be taken into account. We recommend that soft start and brake devices should in principle be dimensioned one higher power level.

The DC electronic brake VersiBrake [25A] The standard device is available in the 100 mm housing and with extended options on request. The device shall be: cUL certified. Three-phase motors are safely braked with VersiBrake brake devices.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing installations
• Free from wear and maintenance
• Special voltages up to 575 V (UL): up to 480 V) with option “B”
• For snapping on 35 mm standard rail
• Degree of protection IP 20

Functions

• Control via motor contactor
• Standstill detection
• Brake current limitation to unit rated current
• Remanence time optimization
• Brake current continuously adjustable
• Potential-free output for motor contactor locking during braking
• Potential-free output for noise alarm relays

Options

• Available on request:
• UL version
• Star-triangle start-up control (D)
• Engine temperature monitoring (P)
• Standstill indicator relay (S)
• Wide Voltage Capacity 200 – 575 V (B)
• Requires a control voltage of 24 VAC or 230 VAC

The DC electronic brake VersiBrake [25A] The standard device is available in the 100 mm housing and with extended options on request. The device shall be: cUL certified. Three-phase motors are safely braked with VersiBrake brake devices.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing installations
• Free from wear and maintenance
• Special voltages up to 575 V (UL): up to 480 V) with option “B”
• For snapping on 35 mm standard rail
• Degree of protection IP 20

Functions

• Control via motor contactor
• Standstill detection
• Brake current limitation to unit rated current
• Remanence time optimization
• Brake current continuously adjustable
• Potential-free output for motor contactor locking during braking
• Potential-free output for noise alarm relays

Options

• Available on request:
• UL version
• Star-triangle start-up control (D)
• Engine temperature monitoring (P)
• Standstill indicator relay (S)
• Wide Voltage Capacity 200 – 575 V (B)
• Requires a control voltage of 24 VAC or 230 VAC

The DC electronic brake VersiBrake [25A] The standard device is available in the 100 mm housing and with extended options on request. The device shall be: cUL certified. Three-phase motors are safely braked with VersiBrake brake devices.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing installations
• Free from wear and maintenance
• Special voltages up to 575 V (UL): up to 480 V) with option “B”
• For snapping on 35 mm standard rail
• Degree of protection IP 20

Functions

• Control via motor contactor
• Standstill detection
• Brake current limitation to unit rated current
• Remanence time optimization
• Brake current continuously adjustable
• Potential-free output for motor contactor locking during braking
• Potential-free output for noise alarm relays

Options

• Available on request:
• UL version
• Star-triangle start-up control (D)
• Engine temperature monitoring (P)
• Standstill indicator relay (S)
• Wide Voltage Capacity 200 – 575 V (B)
• Requires a control voltage of 24 VAC or 230 VAC

The DC electronic brake VersiBrake [25A] The standard device is available in the 100 mm housing and with extended options on request. The device shall be: cUL certified. Three-phase motors are safely braked with VersiBrake brake devices.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing installations
• Free from wear and maintenance
• Special voltages up to 575 V (UL): up to 480 V) with option “B”
• For snapping on 35 mm standard rail
• Degree of protection IP 20

Functions

• Control via motor contactor
• Standstill detection
• Brake current limitation to unit rated current
• Remanence time optimization
• Brake current continuously adjustable
• Potential-free output for motor contactor locking during braking
• Potential-free output for noise alarm relays

Options

• Available on request:
• UL version
• Star-triangle start-up control (D)
• Engine temperature monitoring (P)
• Standstill indicator relay (S)
• Wide Voltage Capacity 200 – 575 V (B)
• Requires a control voltage of 24 VAC or 230 VAC

The DC electronic brake VersiBrake [40 – 600 A] serves for the rapid, safe and wear-free braking of three-phase motors. It is microcontroller-controlled, designed for industrial continuous operation and ensures uniform, reproducible braking behavior. Thanks to its modular design and integrated brake protector (up to 60 A), the VersiBrake series can be easily integrated into existing systems.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing plants
• Free from wear and maintenance
• Brake protector integrated (for devices up to 60 A)
• Degree of protection IP 20

Functions

• Control via motor contactor
• Stationary or time-dependent braking
• Brake time-out monitoring
• Brake current setting 0 – 100 %, current control
• Automatic remanence time optimization
• Braking times 0,5 – 320 s
• Temperature monitoring of the heat sink
• Value-free reporting and tax outputs
• 2. Brake time 0,5 – 40 s selectable
• Manually selectable brake stop

Options

The following option packages are available:

VersiBrake 230/400-40... 600 (APC package):

• Brake current indicator
• Pluggable control terminals
• Engine PTC monitoring
• Star-triangle start-up control
• Standstill signalling relays
• Brake current monitoring

VersiBrake 600-40... 600 UL (APBC package):

• All options as in the “APC package”
• Wide Voltage Capacity 200 – 600 V
• Further control voltages on request

Technical data (excerpt)

• Mains voltage according to DIN EN 50160 (IEC 38): 220/240 V ± 10 % or 380/415 V ± 10 % – 50/60 Hz
• Nominal equipment power: 40 A / 60 A / 100 A / 200 A / 400 A / 600 A
• Brake current control 0 – 220 V DC
• Braking time 0,5 – 320 s
• Relay contact load capacity: 3 A / 250 VAC and 30 VDC
• Maximum connection section up to 35 mm2 (depending on type)
• Ambient temperature 0 – 45 °C / Bearing – 25 – 75 °C
• Weight approximately 2,1 – 10,2 kg

Preferred areas of application

• Fans and fans
• Stirrers and centrifuges
• Sawing and handling equipment
• Machinery for working wood and metal
• Grinding machines and high-load drives

Note:

When using IE3-Motoren, higher starting and braking currents must be taken into account. We recommend that soft start and brake devices should in principle be dimensioned one higher power level.

The DC electronic brake VersiBrake [40 – 600 A] serves for the rapid, safe and wear-free braking of three-phase motors. It is microcontroller-controlled, designed for industrial continuous operation and ensures uniform, reproducible braking behavior. Thanks to its modular design and integrated brake protector (up to 60 A), the VersiBrake series can be easily integrated into existing systems.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing plants
• Free from wear and maintenance
• Brake protector integrated (for devices up to 60 A)
• Degree of protection IP 20

Functions

• Control via motor contactor
• Stationary or time-dependent braking
• Brake time-out monitoring
• Brake current setting 0 – 100 %, current control
• Automatic remanence time optimization
• Braking times 0,5 – 320 s
• Temperature monitoring of the heat sink
• Value-free reporting and tax outputs
• 2. Brake time 0,5 – 40 s selectable
• Manually selectable brake stop

Options

The following option packages are available:

VersiBrake 230/400-40... 600 (APC package):

• Brake current indicator
• Pluggable control terminals
• Engine PTC monitoring
• Star-triangle start-up control
• Standstill signalling relays
• Brake current monitoring

VersiBrake 600-40... 600 UL (APBC package):

• All options as in the “APC package”
• Wide Voltage Capacity 200 – 600 V
• Further control voltages on request

Technical data (excerpt)

• Mains voltage according to DIN EN 50160 (IEC 38): 220/240 V ± 10 % or 380/415 V ± 10 % – 50/60 Hz
• Nominal equipment power: 40 A / 60 A / 100 A / 200 A / 400 A / 600 A
• Brake current control 0 – 220 V DC
• Braking time 0,5 – 320 s
• Relay contact load capacity: 3 A / 250 VAC and 30 VDC
• Maximum connection section up to 35 mm2 (depending on type)
• Ambient temperature 0 – 45 °C / Bearing – 25 – 75 °C
• Weight approximately 2,1 – 10,2 kg

Preferred areas of application

• Fans and fans
• Stirrers and centrifuges
• Sawing and handling equipment
• Machinery for working wood and metal
• Grinding machines and high-load drives

Note:

When using IE3-Motoren, higher starting and braking currents must be taken into account. We recommend that soft start and brake devices should in principle be dimensioned one higher power level.

The DC electronic brake VersiBrake [40 – 600 A] serves for the rapid, safe and wear-free braking of three-phase motors. It is microcontroller-controlled, designed for industrial continuous operation and ensures uniform, reproducible braking behavior. Thanks to its modular design and integrated brake protector (up to 60 A), the VersiBrake series can be easily integrated into existing systems.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing plants
• Free from wear and maintenance
• Brake protector integrated (for devices up to 60 A)
• Degree of protection IP 20

Functions

• Control via motor contactor
• Stationary or time-dependent braking
• Brake time-out monitoring
• Brake current setting 0 – 100 %, current control
• Automatic remanence time optimization
• Braking times 0,5 – 320 s
• Temperature monitoring of the heat sink
• Value-free reporting and tax outputs
• 2. Brake time 0,5 – 40 s selectable
• Manually selectable brake stop

Options

The following option packages are available:

VersiBrake 230/400-40... 600 (APC package):

• Brake current indicator
• Pluggable control terminals
• Engine PTC monitoring
• Star-triangle start-up control
• Standstill signalling relays
• Brake current monitoring

VersiBrake 600-40... 600 UL (APBC package):

• All options as in the “APC package”
• Wide Voltage Capacity 200 – 600 V
• Further control voltages on request

Technical data (excerpt)

• Mains voltage according to DIN EN 50160 (IEC 38): 220/240 V ± 10 % or 380/415 V ± 10 % – 50/60 Hz
• Nominal equipment power: 40 A / 60 A / 100 A / 200 A / 400 A / 600 A
• Brake current control 0 – 220 V DC
• Braking time 0,5 – 320 s
• Relay contact load capacity: 3 A / 250 VAC and 30 VDC
• Maximum connection section up to 35 mm2 (depending on type)
• Ambient temperature 0 – 45 °C / Bearing – 25 – 75 °C
• Weight approximately 2,1 – 10,2 kg

Preferred areas of application

• Fans and fans
• Stirrers and centrifuges
• Sawing and handling equipment
• Machinery for working wood and metal
• Grinding machines and high-load drives

Note:

When using IE3-Motoren, higher starting and braking currents must be taken into account. We recommend that soft start and brake devices should in principle be dimensioned one higher power level.

The DC electronic brake VersiBrake [40 – 600 A] serves for the rapid, safe and wear-free braking of three-phase motors. It is microcontroller-controlled, designed for industrial continuous operation and ensures uniform, reproducible braking behavior. Thanks to its modular design and integrated brake protector (up to 60 A), the VersiBrake series can be easily integrated into existing systems.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing plants
• Free from wear and maintenance
• Brake protector integrated (for devices up to 60 A)
• Degree of protection IP 20

Functions

• Control via motor contactor
• Stationary or time-dependent braking
• Brake time-out monitoring
• Brake current setting 0 – 100 %, current control
• Automatic remanence time optimization
• Braking times 0,5 – 320 s
• Temperature monitoring of the heat sink
• Value-free reporting and tax outputs
• 2. Brake time 0,5 – 40 s selectable
• Manually selectable brake stop

Options

The following option packages are available:

VersiBrake 230/400-40... 600 (APC package):

• Brake current indicator
• Pluggable control terminals
• Engine PTC monitoring
• Star-triangle start-up control
• Standstill signalling relays
• Brake current monitoring

VersiBrake 600-40... 600 UL (APBC package):

• All options as in the “APC package”
• Wide Voltage Capacity 200 – 600 V
• Further control voltages on request

Technical data (excerpt)

• Mains voltage according to DIN EN 50160 (IEC 38): 220/240 V ± 10 % or 380/415 V ± 10 % – 50/60 Hz
• Nominal equipment power: 40 A / 60 A / 100 A / 200 A / 400 A / 600 A
• Brake current control 0 – 220 V DC
• Braking time 0,5 – 320 s
• Relay contact load capacity: 3 A / 250 VAC and 30 VDC
• Maximum connection section up to 35 mm2 (depending on type)
• Ambient temperature 0 – 45 °C / Bearing – 25 – 75 °C
• Weight approximately 2,1 – 10,2 kg

Preferred areas of application

• Fans and fans
• Stirrers and centrifuges
• Sawing and handling equipment
• Machinery for working wood and metal
• Grinding machines and high-load drives

Note:

When using IE3-Motoren, higher starting and braking currents must be taken into account. We recommend that soft start and brake devices should in principle be dimensioned one higher power level.

Characteristics

• DC braking with one-way rectification
• Suitable for all asynchronous and single-phase AC motors
• Microcontroller controlled
• Easy installation, including in existing plants
• Free from wear and maintenance
• Brake protector integrated
• for snapping onto 35 mm standard rail
• Degree of protection IP 20
• Replacement of brake devices of types BR and BR-L

Functions

• Control via motor contactor
• Overload protection
• Brake current control, continuously adjustable (10 – 100 %)
• Automatic remanence time optimization
• Brake stop possible
• Restart 1,2 s after brake stop
• Brake time adjustable (0 – 30 s, special version 0 – 60 s)
• Potential-free output for motor contactor locking during braking
• also usable for Y-protection control during braking

Technical data (excerpt)

• Mains voltage according to DIN EN 50160 (IEC 38): 220/240 V ± 10 % – 50/60 Hz | 380/415 V ± 10 % – 50/60 Hz
• Nominal equipment power: 6 A / 25 A / 30 A
• Brake current: 0 – 110 VDC (230 V-type) / 0 – 220 VDC (400 V-type)
• Brake time: 0 – 30 s (standard), 0 – 60 s (optional)
• Contact load capacity of output relays: 3 A / 250 VAC and 30 VDC
• Ambient temperature: 0 – 45 °C / Warehouse –25 – 75 °C
• Weight: Approximately 0,6 kg

Preferred areas of application

• Saws
• Centrifuges
• Transport equipment
• Machinery for working wood and metal
• Grinding and textile machinery
• Other torque-intensive applications

Note:

When using IE3-Motoren, due to higher starting and braking currents, the soft starter and brake devices are basically one power level higher interpreted.

The DC electronic brake VersiBrake [40 – 600 A] serves for the rapid, safe and wear-free braking of three-phase motors. It is microcontroller-controlled, designed for industrial continuous operation and ensures uniform, reproducible braking behavior. Thanks to its modular design and integrated brake protector (up to 60 A), the VersiBrake series can be easily integrated into existing systems.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing plants
• Free from wear and maintenance
• Brake protector integrated (for devices up to 60 A)
• Degree of protection IP 20

Functions

• Control via motor contactor
• Stationary or time-dependent braking
• Brake time-out monitoring
• Brake current setting 0 – 100 %, current control
• Automatic remanence time optimization
• Braking times 0,5 – 320 s
• Temperature monitoring of the heat sink
• Value-free reporting and tax outputs
• 2. Brake time 0,5 – 40 s selectable
• Manually selectable brake stop

Options

The following option packages are available:

VersiBrake 230/400-40... 600 (APC package):

• Brake current indicator
• Pluggable control terminals
• Engine PTC monitoring
• Star-triangle start-up control
• Standstill signalling relays
• Brake current monitoring

VersiBrake 600-40... 600 UL (APBC package):

• All options as in the “APC package”
• Wide Voltage Capacity 200 – 600 V
• Further control voltages on request

Technical data (excerpt)

• Mains voltage according to DIN EN 50160 (IEC 38): 220/240 V ± 10 % or 380/415 V ± 10 % – 50/60 Hz
• Nominal equipment power: 40 A / 60 A / 100 A / 200 A / 400 A / 600 A
• Brake current control 0 – 220 V DC
• Braking time 0,5 – 320 s
• Relay contact load capacity: 3 A / 250 VAC and 30 VDC
• Maximum connection section up to 35 mm2 (depending on type)
• Ambient temperature 0 – 45 °C / Bearing – 25 – 75 °C
• Weight approximately 2,1 – 10,2 kg

Preferred areas of application

• Fans and fans
• Stirrers and centrifuges
• Sawing and handling equipment
• Machinery for working wood and metal
• Grinding machines and high-load drives

Note:

When using IE3-Motoren, higher starting and braking currents must be taken into account. We recommend that soft start and brake devices should in principle be dimensioned one higher power level.

The DC electronic brake VersiBrake [40 – 600 A] serves for the rapid, safe and wear-free braking of three-phase motors. It is microcontroller-controlled, designed for industrial continuous operation and ensures uniform, reproducible braking behavior. Thanks to its modular design and integrated brake protector (up to 60 A), the VersiBrake series can be easily integrated into existing systems.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing plants
• Free from wear and maintenance
• Brake protector integrated (for devices up to 60 A)
• Degree of protection IP 20

Functions

• Control via motor contactor
• Stationary or time-dependent braking
• Brake time-out monitoring
• Brake current setting 0 – 100 %, current control
• Automatic remanence time optimization
• Braking times 0,5 – 320 s
• Temperature monitoring of the heat sink
• Value-free reporting and tax outputs
• 2. Brake time 0,5 – 40 s selectable
• Manually selectable brake stop

Options

The following option packages are available:

VersiBrake 230/400-40... 600 (APC package):

• Brake current indicator
• Pluggable control terminals
• Engine PTC monitoring
• Star-triangle start-up control
• Standstill signalling relays
• Brake current monitoring

VersiBrake 600-40... 600 UL (APBC package):

• All options as in the “APC package”
• Wide Voltage Capacity 200 – 600 V
• Further control voltages on request

Technical data (excerpt)

• Mains voltage according to DIN EN 50160 (IEC 38): 220/240 V ± 10 % or 380/415 V ± 10 % – 50/60 Hz
• Nominal equipment power: 40 A / 60 A / 100 A / 200 A / 400 A / 600 A
• Brake current control 0 – 220 V DC
• Braking time 0,5 – 320 s
• Relay contact load capacity: 3 A / 250 VAC and 30 VDC
• Maximum connection section up to 35 mm2 (depending on type)
• Ambient temperature 0 – 45 °C / Bearing – 25 – 75 °C
• Weight approximately 2,1 – 10,2 kg

Preferred areas of application

• Fans and fans
• Stirrers and centrifuges
• Sawing and handling equipment
• Machinery for working wood and metal
• Grinding machines and high-load drives

Note:

When using IE3-Motoren, higher starting and braking currents must be taken into account. We recommend that soft start and brake devices should in principle be dimensioned one higher power level.

The DC electronic brake VersiBrake [25A] The standard device is available in the 100 mm housing and with extended options on request. The device shall be: cUL certified. Three-phase motors are safely braked with VersiBrake brake devices.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing installations
• Free from wear and maintenance
• Special voltages up to 575 V (UL): up to 480 V) with option “B”
• For snapping on 35 mm standard rail
• Degree of protection IP 20

Functions

• Control via motor contactor
• Standstill detection
• Brake current limitation to unit rated current
• Remanence time optimization
• Brake current continuously adjustable
• Potential-free output for motor contactor locking during braking
• Potential-free output for noise alarm relays

Options

• Available on request:
• UL version
• Star-triangle start-up control (D)
• Engine temperature monitoring (P)
• Standstill indicator relay (S)
• Wide Voltage Capacity 200 – 575 V (B)
• Requires a control voltage of 24 VAC or 230 VAC

The DC electronic brake VersiBrake [25A] The standard device is available in the 100 mm housing and with extended options on request. The device shall be: cUL certified. Three-phase motors are safely braked with VersiBrake brake devices.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing installations
• Free from wear and maintenance
• Special voltages up to 575 V (UL): up to 480 V) with option “B”
• For snapping on 35 mm standard rail
• Degree of protection IP 20

Functions

• Control via motor contactor
• Standstill detection
• Brake current limitation to unit rated current
• Remanence time optimization
• Brake current continuously adjustable
• Potential-free output for motor contactor locking during braking
• Potential-free output for noise alarm relays

Options

• Available on request:
• UL version
• Star-triangle start-up control (D)
• Engine temperature monitoring (P)
• Standstill indicator relay (S)
• Wide Voltage Capacity 200 – 575 V (B)
• Requires a control voltage of 24 VAC or 230 VAC

The DC electronic brake VersiBrake [25A] The standard device is available in the 100 mm housing and with extended options on request. The device shall be: cUL certified. Three-phase motors are safely braked with VersiBrake brake devices.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing installations
• Free from wear and maintenance
• Special voltages up to 575 V (UL): up to 480 V) with option “B”
• For snapping on 35 mm standard rail
• Degree of protection IP 20

Functions

• Control via motor contactor
• Standstill detection
• Brake current limitation to unit rated current
• Remanence time optimization
• Brake current continuously adjustable
• Potential-free output for motor contactor locking during braking
• Potential-free output for noise alarm relays

Options

• Available on request:
• UL version
• Star-triangle start-up control (D)
• Engine temperature monitoring (P)
• Standstill indicator relay (S)
• Wide Voltage Capacity 200 – 575 V (B)
• Requires a control voltage of 24 VAC or 230 VAC

The DC electronic brake VersiBrake [25A] The standard device is available in the 100 mm housing and with extended options on request. The device shall be: cUL certified. Three-phase motors are safely braked with VersiBrake brake devices.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing installations
• Free from wear and maintenance
• Special voltages up to 575 V (UL): up to 480 V) with option “B”
• For snapping on 35 mm standard rail
• Degree of protection IP 20

Functions

• Control via motor contactor
• Standstill detection
• Brake current limitation to unit rated current
• Remanence time optimization
• Brake current continuously adjustable
• Potential-free output for motor contactor locking during braking
• Potential-free output for noise alarm relays

Options

• Available on request:
• UL version
• Star-triangle start-up control (D)
• Engine temperature monitoring (P)
• Standstill indicator relay (S)
• Wide Voltage Capacity 200 – 575 V (B)
• Requires a control voltage of 24 VAC or 230 VAC

The DC electronic brake VersiBrake [40 – 600 A] serves for the rapid, safe and wear-free braking of three-phase motors. It is microcontroller-controlled, designed for industrial continuous operation and ensures uniform, reproducible braking behavior. Thanks to its modular design and integrated brake protector (up to 60 A), the VersiBrake series can be easily integrated into existing systems.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing plants
• Free from wear and maintenance
• Brake protector integrated (for devices up to 60 A)
• Degree of protection IP 20

Functions

• Control via motor contactor
• Stationary or time-dependent braking
• Brake time-out monitoring
• Brake current setting 0 – 100 %, current control
• Automatic remanence time optimization
• Braking times 0,5 – 320 s
• Temperature monitoring of the heat sink
• Value-free reporting and tax outputs
• 2. Brake time 0,5 – 40 s selectable
• Manually selectable brake stop

Options

The following option packages are available:

VersiBrake 230/400-40... 600 (APC package):

• Brake current indicator
• Pluggable control terminals
• Engine PTC monitoring
• Star-triangle start-up control
• Standstill signalling relays
• Brake current monitoring

VersiBrake 600-40... 600 UL (APBC package):

• All options as in the “APC package”
• Wide Voltage Capacity 200 – 600 V
• Further control voltages on request

Technical data (excerpt)

• Mains voltage according to DIN EN 50160 (IEC 38): 220/240 V ± 10 % or 380/415 V ± 10 % – 50/60 Hz
• Nominal equipment power: 40 A / 60 A / 100 A / 200 A / 400 A / 600 A
• Brake current control 0 – 220 V DC
• Braking time 0,5 – 320 s
• Relay contact load capacity: 3 A / 250 VAC and 30 VDC
• Maximum connection section up to 35 mm2 (depending on type)
• Ambient temperature 0 – 45 °C / Bearing – 25 – 75 °C
• Weight approximately 2,1 – 10,2 kg

Preferred areas of application

• Fans and fans
• Stirrers and centrifuges
• Sawing and handling equipment
• Machinery for working wood and metal
• Grinding machines and high-load drives

Note:

When using IE3-Motoren, higher starting and braking currents must be taken into account. We recommend that soft start and brake devices should in principle be dimensioned one higher power level.

The DC electronic brake VersiBrake [40 – 600 A] serves for the rapid, safe and wear-free braking of three-phase motors. It is microcontroller-controlled, designed for industrial continuous operation and ensures uniform, reproducible braking behavior. Thanks to its modular design and integrated brake protector (up to 60 A), the VersiBrake series can be easily integrated into existing systems.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing plants
• Free from wear and maintenance
• Brake protector integrated (for devices up to 60 A)
• Degree of protection IP 20

Functions

• Control via motor contactor
• Stationary or time-dependent braking
• Brake time-out monitoring
• Brake current setting 0 – 100 %, current control
• Automatic remanence time optimization
• Braking times 0,5 – 320 s
• Temperature monitoring of the heat sink
• Value-free reporting and tax outputs
• 2. Brake time 0,5 – 40 s selectable
• Manually selectable brake stop

Options

The following option packages are available:

VersiBrake 230/400-40... 600 (APC package):

• Brake current indicator
• Pluggable control terminals
• Engine PTC monitoring
• Star-triangle start-up control
• Standstill signalling relays
• Brake current monitoring

VersiBrake 600-40... 600 UL (APBC package):

• All options as in the “APC package”
• Wide Voltage Capacity 200 – 600 V
• Further control voltages on request

Technical data (excerpt)

• Mains voltage according to DIN EN 50160 (IEC 38): 220/240 V ± 10 % or 380/415 V ± 10 % – 50/60 Hz
• Nominal equipment power: 40 A / 60 A / 100 A / 200 A / 400 A / 600 A
• Brake current control 0 – 220 V DC
• Braking time 0,5 – 320 s
• Relay contact load capacity: 3 A / 250 VAC and 30 VDC
• Maximum connection section up to 35 mm2 (depending on type)
• Ambient temperature 0 – 45 °C / Bearing – 25 – 75 °C
• Weight approximately 2,1 – 10,2 kg

Preferred areas of application

• Fans and fans
• Stirrers and centrifuges
• Sawing and handling equipment
• Machinery for working wood and metal
• Grinding machines and high-load drives

Note:

When using IE3-Motoren, higher starting and braking currents must be taken into account. We recommend that soft start and brake devices should in principle be dimensioned one higher power level.

The DC electronic brake VersiBrake [40 – 600 A] serves for the rapid, safe and wear-free braking of three-phase motors. It is microcontroller-controlled, designed for industrial continuous operation and ensures uniform, reproducible braking behavior. Thanks to its modular design and integrated brake protector (up to 60 A), the VersiBrake series can be easily integrated into existing systems.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing plants
• Free from wear and maintenance
• Brake protector integrated (for devices up to 60 A)
• Degree of protection IP 20

Functions

• Control via motor contactor
• Stationary or time-dependent braking
• Brake time-out monitoring
• Brake current setting 0 – 100 %, current control
• Automatic remanence time optimization
• Braking times 0,5 – 320 s
• Temperature monitoring of the heat sink
• Value-free reporting and tax outputs
• 2. Brake time 0,5 – 40 s selectable
• Manually selectable brake stop

Options

The following option packages are available:

VersiBrake 230/400-40... 600 (APC package):

• Brake current indicator
• Pluggable control terminals
• Engine PTC monitoring
• Star-triangle start-up control
• Standstill signalling relays
• Brake current monitoring

VersiBrake 600-40... 600 UL (APBC package):

• All options as in the “APC package”
• Wide Voltage Capacity 200 – 600 V
• Further control voltages on request

Technical data (excerpt)

• Mains voltage according to DIN EN 50160 (IEC 38): 220/240 V ± 10 % or 380/415 V ± 10 % – 50/60 Hz
• Nominal equipment power: 40 A / 60 A / 100 A / 200 A / 400 A / 600 A
• Brake current control 0 – 220 V DC
• Braking time 0,5 – 320 s
• Relay contact load capacity: 3 A / 250 VAC and 30 VDC
• Maximum connection section up to 35 mm2 (depending on type)
• Ambient temperature 0 – 45 °C / Bearing – 25 – 75 °C
• Weight approximately 2,1 – 10,2 kg

Preferred areas of application

• Fans and fans
• Stirrers and centrifuges
• Sawing and handling equipment
• Machinery for working wood and metal
• Grinding machines and high-load drives

Note:

When using IE3-Motoren, higher starting and braking currents must be taken into account. We recommend that soft start and brake devices should in principle be dimensioned one higher power level.

The DC electronic brake VersiBrake [40 – 600 A] serves for the rapid, safe and wear-free braking of three-phase motors. It is microcontroller-controlled, designed for industrial continuous operation and ensures uniform, reproducible braking behavior. Thanks to its modular design and integrated brake protector (up to 60 A), the VersiBrake series can be easily integrated into existing systems.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing plants
• Free from wear and maintenance
• Brake protector integrated (for devices up to 60 A)
• Degree of protection IP 20

Functions

• Control via motor contactor
• Stationary or time-dependent braking
• Brake time-out monitoring
• Brake current setting 0 – 100 %, current control
• Automatic remanence time optimization
• Braking times 0,5 – 320 s
• Temperature monitoring of the heat sink
• Value-free reporting and tax outputs
• 2. Brake time 0,5 – 40 s selectable
• Manually selectable brake stop

Options

The following option packages are available:

VersiBrake 230/400-40... 600 (APC package):

• Brake current indicator
• Pluggable control terminals
• Engine PTC monitoring
• Star-triangle start-up control
• Standstill signalling relays
• Brake current monitoring

VersiBrake 600-40... 600 UL (APBC package):

• All options as in the “APC package”
• Wide Voltage Capacity 200 – 600 V
• Further control voltages on request

Technical data (excerpt)

• Mains voltage according to DIN EN 50160 (IEC 38): 220/240 V ± 10 % or 380/415 V ± 10 % – 50/60 Hz
• Nominal equipment power: 40 A / 60 A / 100 A / 200 A / 400 A / 600 A
• Brake current control 0 – 220 V DC
• Braking time 0,5 – 320 s
• Relay contact load capacity: 3 A / 250 VAC and 30 VDC
• Maximum connection section up to 35 mm2 (depending on type)
• Ambient temperature 0 – 45 °C / Bearing – 25 – 75 °C
• Weight approximately 2,1 – 10,2 kg

Preferred areas of application

• Fans and fans
• Stirrers and centrifuges
• Sawing and handling equipment
• Machinery for working wood and metal
• Grinding machines and high-load drives

Note:

When using IE3-Motoren, higher starting and braking currents must be taken into account. We recommend that soft start and brake devices should in principle be dimensioned one higher power level.

The DC electronic brake VersiBrake [25A] The standard device is available in the 100 mm housing and with extended options on request. The device shall be: cUL certified. Three-phase motors are safely braked with VersiBrake brake devices.

Characteristics

• DC braking with one-way rectification
• Microcontroller controlled
• Suitable for all asynchronous motors
• Easy installation, including in existing installations
• Free from wear and maintenance
• Special voltages up to 575 V (UL): up to 480 V) with option “B”
• For snapping on 35 mm standard rail
• Degree of protection IP 20

Functions

• Control via motor contactor
• Standstill detection
• Brake current limitation to unit rated current
• Remanence time optimization
• Brake current continuously adjustable
• Potential-free output for motor contactor locking during braking
• Potential-free output for noise alarm relays

Options

• Available on request:
• UL version
• Star-triangle start-up control (D)
• Engine temperature monitoring (P)
• Standstill indicator relay (S)
• Wide Voltage Capacity 200 – 575 V (B)
• Requires a control voltage of 24 VAC or 230 VAC