MP-DC motors

Protection class IP40 - Voltages between 12V and 170 Volt are available. Speed 3000 min-1

These permanent magnet DC motors are manufactured in four outer diameter sizes - ø48, ø65, ø80 and ø110 mm - with different lengths, covering power ranges up to 500 watts. Each of these sizes can be customised in terms of power supply, speed, connection configuration, options and more. A standard self-ventilation system can be supplied on request to achieve a power increase of approx. 30 %. Additional options are available for power ranges above 500 watts to allow an even higher level of customisation: The technical department is ready to solve any project at no additional cost in order to obtain the most suitable product for the customer's requirements.

In stock

MP55.15X Permanent magnet DC motor; 12/24/36/48/170 V DC; 115/130/230 W

MP55.15X — Permanent magnet DC motor

Series overview. The operating points and mechanics of the selected article variant apply.

Parameter	Value	Unit
Operating data · Operating point 1 (12 V DC)
Rated voltage	12	V DC
Output power	130	W
Speed	1,700	min⁻¹
Rated current	14	A
Rated torque	0.75	Nm
Duty type	S1
Maximum current	30	A
Armature resistance	0.4	Ω
Armature inductance	1	mH
Operating data · Operating point 2 (24 V DC)
Rated voltage	24	V DC
Output power	115	W
Speed	1,500	min⁻¹
Rated current	12.6	A
Rated torque	On request	Nm
Duty type	S1
Maximum current	50	A
Armature resistance	On request	Ω
Armature inductance	On request	mH
Operating data · Operating point 3 (24 V DC)
Rated voltage	24	V DC
Output power	230	W
Speed	3,000	min⁻¹
Rated current	12.6	A
Rated torque	0.75	Nm
Duty type	S1
Maximum current	50	A
Armature resistance	0.45	Ω
Armature inductance	2	mH
Operating data · Operating point 4 (36 V DC)
Rated voltage	36	V DC
Output power	230	W
Speed	3,000	min⁻¹
Rated current	8.4	A
Rated torque	On request	Nm
Duty type	S1
Maximum current	34	A
Armature resistance	On request	Ω
Armature inductance	On request	mH
Operating data · Operating point 5 (48 V DC)
Rated voltage	48	V DC
Output power	230	W
Speed	3,000	min⁻¹
Rated current	6.3	A
Rated torque	0.75	Nm
Duty type	S1
Maximum current	25	A
Armature resistance	1.1	Ω
Armature inductance	5	mH
Operating data · Operating point 6 (170 V DC)
Rated voltage	170	V DC
Output power	115	W
Speed	1,500	min⁻¹
Rated current	1.8	A
Rated torque	On request	Nm
Duty type	S1
Maximum current	7	A
Armature resistance	On request	Ω
Armature inductance	On request	mH
Operating data · Operating point 7 (170 V DC)
Rated voltage	170	V DC
Output power	230	W
Speed	3,000	min⁻¹
Rated current	1.8	A
Rated torque	0.75	Nm
Duty type	S1
Maximum current	7	A
Armature resistance	6	Ω
Armature inductance	40	mH
Design and mechanics
Housing diameter	80	mm
Mounting	Depending on version
Base motor rotor inertia	0.00045	kg·m²
Equipment
Motor design	Permanent magnet DC motor
Degree of protection	IP40
Insulation class	F
Cooling	Without fan
Connection	Lead wires
Bearings	Ball bearings

Series illustration; see data for configuration.

Unspecified values or values awaiting confirmation: on request. S6 duty and permissible overload: on request. Maximum current is not a permissible continuous current.

170 V versions available on request

These versions are separate articles. Please select the matching shaft and, where applicable, holding brake: