KS flat motors
Items 1 - 20 of 20
- single-phase circular saw motor
- Power = 2,2 kW
- Speed = 2800 rpm
- Type of flange = clamping flange
- Saw blade bore = 25,4mm
- Direction of rotation=right
- Shaft thread=left, single-phase motor
- Voltage = 1 x 230 V (± 5% according to VDE 0530)
- Frequency = 50Hz
- Electricity = 13,2A
- Structure = B34
- Weight = 13,5kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- single-phase circular saw motor
- Power = 2,2 kW
- Speed = 2800 rpm
- Type of flange = clamping flange
- Saw blade bore = 25,4mm
- Direction of rotation = left
- Shaft thread=right, single-phase motor
- Voltage = 1 x 230 V (± 5% according to VDE 0530)
- Frequency = 50Hz
- Electricity = 13,2A
- Structure = B34
- Weight = 13,5kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- single-phase circular saw motor
- Power = 1,8 kW
- Speed = 2790 rpm
- Type of flange = clamping flange
- Saw blade bore = 25,4mm
- Direction of rotation=right
- Shaft thread=left, single-phase motor
- Voltage = 1 x 230 V (± 5% according to VDE 0530)
- Frequency = 50Hz
- Electricity = 11,1A
- Structure = B34
- Weight = 12,39kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- single-phase circular saw motor
- Power = 1,8 kW
- Speed = 2790 rpm
- Type of flange = clamping flange
- Saw blade bore = 25,4mm
- Direction of rotation = left
- Shaft thread=right, single-phase motor
- Voltage = 1 x 230 V (± 5% according to VDE 0530)
- Frequency = 50Hz
- Electricity = 11,1A
- Structure = B34
- Weight = 12,39kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- single-phase circular saw motor
- Power = 1,5 kW
- Speed = 2790 rpm
- Type of flange = clamping flange
- Saw blade bore = 25,4mm
- Direction of rotation=right
- Shaft thread=left, single-phase motor
- Voltage = 1 x 230 V (± 5% according to VDE 0530)
- Frequency = 50Hz
- Electricity = 9,51A
- Structure = B34
- Weight = 11,27kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- single-phase circular saw motor
- Power = 1,5 kW
- Speed = 2790 rpm
- Type of flange = clamping flange
- Saw blade bore = 25,4mm
- Direction of rotation = left
- Shaft thread=right, single-phase motor
- Voltage = 1 x 230 V (± 5% according to VDE 0530)
- Frequency = 50Hz
- Electricity = 9,51A
- Structure = B34
- Weight = 11,27kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- single-phase circular saw motor
- Power = 1,1 kW
- Speed = 2770 rpm
- Type of flange = clamping flange
- Saw blade bore = 25,4mm
- Direction of rotation=right
- Shaft thread=left, single-phase motor
- Voltage = 1 x 230 V (± 5% according to VDE 0530)
- Frequency = 50Hz
- Electricity = 7,18A
- Structure = B34
- Weight = 9,35kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- single-phase circular saw motor
- Power = 1,1 kW
- Speed = 2770 rpm
- Type of flange = clamping flange
- Saw blade bore = 25,4mm
- Direction of rotation = left
- Shaft thread=right, single-phase motor
- Voltage = 1 x 230 V (± 5% according to VDE 0530)
- Frequency = 50Hz
- Electricity = 7,18A
- Structure = B34
- Weight = 9,35kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- Three-phase circular saw motor
- Power = 7,5 kW
- Speed = 2890 rpm
- Type of flange = clamping flange
- Saw blade bore = 40mm
- Direction of rotation=right
- Shaft thread = left
- Electricity = 13,6A
- Voltage = 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530)
- Structure = B34
- Weight = 45,0kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- Three-phase circular saw motor
- Power = 7,5 kW
- Speed = 2890 rpm
- Type of flange = clamping flange
- Saw blade bore = 40mm
- Direction of rotation = left
- Shaft thread = right
- Electricity = 13,6A
- Voltage = 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530)
- Structure = B34
- Weight = 45,0kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- Three-phase circular saw motor
- Power = 5,5 kW
- Speed = 2880 rpm
- Type of flange = clamping flange
- Saw blade bore = 40mm
- Direction of rotation=right
- Shaft thread = left
- Electricity = 10,5A
- Voltage = 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530)
- Structure = B34
- Weight = 28,15kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- Three-phase circular saw motor
- Power = 5,5 kW
- Speed = 2880 rpm
- Type of flange = clamping flange
- Saw blade bore = 40mm
- Direction of rotation = left
- Shaft thread = right
- Electricity = 10,5A
- Voltage = 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530)
- Structure = B34
- Weight = 28,15kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- Three-phase circular saw motor
- Power = 4,0 kW
- Speed = 2850 rpm
- Type of flange = clamping flange
- Saw blade bore = 30mm
- Direction of rotation=right
- Shaft thread = left
- Electricity = 8,19A
- Voltage = 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530)
- Structure = B34
- Weight = 18,68kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- Three-phase circular saw motor
- Power = 4 kW
- Speed = 2850 rpm
- Type of flange = clamping flange
- Saw blade bore = 30mm
- Direction of rotation = left
- Shaft thread = right
- Electricity = 8,19A
- Voltage = 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530)
- Structure = B34
- Weight = 18,68kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
In stock
- Three-phase circular saw motor
- Power = 3,0 kW
- Speed = 2820 rpm
- Type of flange = clamping flange
- Saw blade bore = 25,4mm
- Direction of rotation=right
- Shaft thread = left
- Electricity = 6,37A
- Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530)
- Structure = B34
- Weight = 14,0kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- Three-phase circular saw motor
- Power = 3,0 kW
- Speed = 2820 rpm
- Type of flange = clamping flange
- Saw blade bore = 25,4mm
- Direction of rotation = left
- Shaft thread = right
- Electricity = 6,37A
- Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530)
- Structure = B34
- Weight = 14,0kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- Three-phase circular saw motor
- Power = 2,2 kW
- Speed = 2750 rpm
- Type of flange = clamping flange
- Saw blade bore = 25,4mm
- Direction of rotation=right
- Shaft thread = left
- Electricity = 4,76A
- Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530)
- Structure = B34
- Weight = 12,31kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- Three-phase circular saw motor
- Power = 2,2 kW
- Speed = 2800 rpm
- Type of flange = clamping flange
- Saw blade bore = 25,4mm
- Direction of rotation = left
- Shaft thread = right
- Electricity = 4,73A
- Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530)
- Structure = B34
- Weight = 12,0kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- Three-phase circular saw motor
- Power = 1,5 kW
- Speed = 2750 rpm
- Type of flange = clamping flange
- Saw blade bore = 25,4mm
- Direction of rotation=right
- Shaft thread = left
- Electricity = 3,41A
- Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530)
- Structure = B34
- Weight = 9,6kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
- Three-phase circular saw motor
- Power = 1,5 kW
- Speed = 2750 rpm
- Type of flange = clamping flange
- Saw blade bore = 25,4mm
- Direction of rotation = left
- Shaft thread = right
- Electricity = 3,41A
- Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530)
- Structure = B34
- Weight = 9,6kg
- Degree of protection = IP55
- Operating mode = S6-40% ED
- terminal box position=right
- Temperature sensors=3 x thermo sensor opener (PTO)
- Ball bearing = SKF, C&U, o.
- Equivalent
- Cooling = axial fan
- Motor feet=fixed.
- According to VDE 0105, i.e.
- IEC 364 all work on the electric drive is to be carried out only by qualified specialists.
Items 1 - 20 of 20