KEMMERICH ELEKTROMOTOREN
MP55.15X Permanent magnet DC motor; 170 V DC; 230 W; 3000 min-1; IEC 63/B14A; Ø14 x 30 mm; Holding brake
| Voltage | 170 V DC |
|---|---|
| Output power | 230 W |
| Speed | 3000 min⁻¹ |
| Rated current | 1.8 A |
| Motor size | MP55 Ø80 mm |
| Mounting form | IEC 63/B14A |
| Shaft | Ø14 x 30 mm |
| Holding brake | Yes |
Further technical data, price and lead time on request.
MP80.05X — Permanent magnet DC motor
Series overview. The operating points and mechanics of the selected article variant apply.
| Parameter | Value | Unit |
|---|---|---|
| Operating data · Operating point 1 (24 V DC) | ||
| Rated voltage | 24 | V DC |
| Output power | 350 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 18 | A |
| Rated torque | 1.11 | Nm |
| Duty type | S1 | |
| Maximum current | 36 | A |
| Operating data · Operating point 2 (48 V DC) | ||
| Rated voltage | 48 | V DC |
| Output power | 350 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | On request | A |
| Rated torque | 1.11 | Nm |
| Duty type | S1 | |
| Maximum current | 15 | A |
| Design and mechanics | ||
| Housing diameter | 110 | mm |
| Mounting | Depending on version | |
| Equipment | ||
| Motor design | Permanent magnet DC motor | |
| Degree of protection | IP40 | |
| Insulation class | F | |
| Cooling | Without fan | |
| Connection | Lead wires | |
| Bearings | Ball bearings | |
Series illustration; see data for configuration.
Unspecified values or values awaiting confirmation: on request. S6 duty and permissible overload: on request. Maximum current is not a permissible continuous current.
MP80.10X — Permanent magnet DC motor
Series overview. The operating points and mechanics of the selected article variant apply.
| Parameter | Value | Unit |
|---|---|---|
| Operating data · Operating point 1 (12 V DC) | ||
| Rated voltage | 12 | V DC |
| Output power | 250 | W |
| Speed | 1,500 | min⁻¹ |
| Rated current | 35 | A |
| Rated torque | On request | Nm |
| Duty type | S1 | |
| Maximum current | 60 | A |
| Operating data · Operating point 2 (24 V DC) | ||
| Rated voltage | 24 | V DC |
| Output power | 250 | W |
| Speed | 1,500 | min⁻¹ |
| Rated current | 17.5 | A |
| Rated torque | On request | Nm |
| Duty type | S1 | |
| Maximum current | 35 | A |
| Operating data · Operating point 3 (24 V DC) | ||
| Rated voltage | 24 | V DC |
| Output power | 320 | W |
| Speed | 1,500 | min⁻¹ |
| Rated current | 22.4 | A |
| Rated torque | On request | Nm |
| Duty type | S1 | |
| Maximum current | 45 | A |
| Operating data · Operating point 4 (24 V DC) | ||
| Rated voltage | 24 | V DC |
| Output power | 500 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 35 | A |
| Rated torque | 1.6 | Nm |
| Duty type | S1 | |
| Maximum current | 60 | A |
| Operating data · Operating point 5 (48 V DC) | ||
| Rated voltage | 48 | V DC |
| Output power | 500 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 17.5 | A |
| Rated torque | 1.6 | Nm |
| Duty type | S1 | |
| Maximum current | 35 | A |
| Design and mechanics | ||
| Housing diameter | 110 | mm |
| Mounting | Depending on version | |
| Equipment | ||
| Motor design | Permanent magnet DC motor | |
| Degree of protection | IP40 | |
| Insulation class | F | |
| Cooling | Without fan | |
| Connection | Lead wires | |
| Bearings | Ball bearings | |
Series illustration; see data for configuration.
Unspecified values or values awaiting confirmation: on request. S6 duty and permissible overload: on request. Maximum current is not a permissible continuous current.
- Voltage: 24 V
- Gear stages: 1
- Motor data: 28 W / 3000 min-1; 56 W / 3000 min-1
- Permissible radial load: 40 N
- Permissible axial load: 40 N
- Degree of protection: 28 W: IP40; 56 W: IP40
- n = output speed; M eff. = effective output torque; M max. = maximum permissible gear torque.
The maximum permissible gear torque must not be exceeded, even if the motor can deliver more torque.
- Voltage: 24 V
- Gear stages: 1
- Motor data: 28 W / 3000 min-1; 56 W / 3000 min-1
- Permissible radial load: 40 N
- Permissible axial load: 40 N
- Degree of protection: 28 W: IP40; 56 W: IP40
- n = output speed; M eff. = effective output torque; M max. = maximum permissible gear torque.
The maximum permissible gear torque must not be exceeded, even if the motor can deliver more torque.