Induction motors
Items 131 - 140 of 1138
• Description of Specification Items
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 9
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 220 VAC / 50 Hz / 0.103 A
single-Phase 220 VAC / 60 Hz / 0.091 A
single-Phase 230 VAC / 50 Hz / 0.107 A
single-Phase 230 VAC / 60 Hz / 0.094 A - Starting Torque (Motor Shaft): single-Phase 220 VAC / 50 Hz: 38 mN·m
single-Phase 220 VAC / 60 Hz: 40 mN·m
single-Phase 230 VAC / 50 Hz: 45 mN·m
single-Phase 230 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 220 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 220 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 230 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 230 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 220 VAC / 50 Hz: 166 r/min
single-Phase 220 VAC / 60 Hz: 200 r/min
single-Phase 230 VAC / 50 Hz: 166 r/min
single-Phase 230 VAC / 60 Hz: 200 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 220 VAC / 50 Hz: 0.36 N·m
single-Phase 220 VAC / 60 Hz: 0.3 N·m
single-Phase 230 VAC / 50 Hz: 0.36 N·m
single-Phase 230 VAC / 60 Hz: 0.3 N·m - Permissible Inertia J: 5×10-4 kg·m2
- capacitor: Product name: CH06BFAUL, Capacity: 0.6 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (E) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2IK6FB-100S general-purpose motor WK2 series
2IK6FB-12.5S general-purpose motor WK2 series
2IK6FB-120S general-purpose motor WK2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 150
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.178 A
single-Phase 115 VAC / 60 Hz / 0.182 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 40 mN·m
single-Phase 115 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 110 VAC / 60 Hz: 12 r/min
single-Phase 115 VAC / 60 Hz: 12 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 110 VAC / 60 Hz: 3 N·m
single-Phase 115 VAC / 60 Hz: 3 N·m - Permissible Inertia J: 155×10-4 kg·m2
- capacitor: Product name: CH25FAUL2, Capacity: 2.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 15
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.178 A
single-Phase 115 VAC / 60 Hz / 0.182 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 40 mN·m
single-Phase 115 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 110 VAC / 60 Hz: 120 r/min
single-Phase 115 VAC / 60 Hz: 120 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 110 VAC / 60 Hz: 0.5 N·m
single-Phase 115 VAC / 60 Hz: 0.5 N·m - Permissible Inertia J: 13.9×10-4 kg·m2
- capacitor: Product name: CH25FAUL2, Capacity: 2.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 180
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.178 A
single-Phase 115 VAC / 60 Hz / 0.182 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 40 mN·m
single-Phase 115 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 110 VAC / 60 Hz: 10 r/min
single-Phase 115 VAC / 60 Hz: 10 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 110 VAC / 60 Hz: 3 N·m
single-Phase 115 VAC / 60 Hz: 3 N·m - Permissible Inertia J: 155×10-4 kg·m2
- capacitor: Product name: CH25FAUL2, Capacity: 2.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2IK6FB-18S general-purpose motor WK2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 25
- Time Rating: Continuous
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.178 A
single-Phase 115 VAC / 60 Hz / 0.182 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 40 mN·m
single-Phase 115 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 110 VAC / 60 Hz: 72 r/min
single-Phase 115 VAC / 60 Hz: 72 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 110 VAC / 60 Hz: 0.75 N·m
single-Phase 115 VAC / 60 Hz: 0.75 N·m - Permissible Inertia J: 38×10-4 kg·m2
- capacitor: Product name: CH25FAUL2, Capacity: 2.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 3.6
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.178 A
single-Phase 115 VAC / 60 Hz / 0.182 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 40 mN·m
single-Phase 115 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: single-Phase 110 VAC / 60 Hz: 500 r/min
single-Phase 115 VAC / 60 Hz: 500 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 110 VAC / 60 Hz: 0.12 N·m
single-Phase 115 VAC / 60 Hz: 0.12 N·m - Permissible Inertia J: 0.8×10-4 kg·m2
- capacitor: Product name: CH25FAUL2, Capacity: 2.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
Items 131 - 140 of 1138