Induction motors
Items 161 - 180 of 482
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• Description of Specification Items
• The product name written on the motor nameplate is 4IK25GN-AW2T. The suffix of the product name above indicates the type of capacitor.
J: single-phase 100 VAC capacitor included (this product)
U: single-phase 110 VAC/115 VAC capacitor included. (4IK25GN-AW2TU)
- Frame Size: 80 mm
- Output Power: 25 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.51 A
single-Phase 100 VAC / 60 Hz / 0.52 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 130 mN·m
single-Phase 100 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 205 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 170 mN·m / 1450 r/min - The Speed When Installing gearhead: Depends on the combination gearhead.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gearhead.
- Permissible Inertia J: Depends on the combination gearhead.
- capacitor: Product name: CH80CFAUL2, Capacity: 8 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
2IK6A-CW2BE general-purpose motor WK2 series
• The product name written on the motor nameplate is 2IK6A-CW2B. The suffix of the product name above indicates the type of capacitor.
J: single-phase 200 VAC capacitor included (this product)
E: single-phase 220 VAC/230 VAC capacitor included. (2IK6A-CW2BE)
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.1 A
single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 45 mN·m
single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.9 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC / 60 Hz: 41 mN·m / 1500 r/min - capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 0.9 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name written on the motor nameplate is 2IK6GN-CW2B. The suffix of the product name above indicates the type of capacitor.
E: single-phase 220 VAC/230 VAC capacitor included (this product)
J: single-phase 200 VAC capacitor included. (2IK6GN-CW2BJ)
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 220 VAC / 50 Hz / 0.103 A
single-Phase 220 VAC / 60 Hz / 0.091 A
single-Phase 230 VAC / 50 Hz / 0.107 A
single-Phase 230 VAC / 60 Hz / 0.094 A - Starting Torque (Motor Shaft): single-Phase 220 VAC / 50 Hz: 38 mN·m
single-Phase 220 VAC / 60 Hz: 40 mN·m
single-Phase 230 VAC / 50 Hz: 45 mN·m
single-Phase 230 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 220 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 220 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 230 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 230 VAC / 60 Hz: 41 mN·m / 1450 r/min - The Speed When Installing gearhead: Depends on the combination gearhead.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gearhead.
- Permissible Inertia J: Depends on the combination gearhead.
- capacitor: Product name: CH06BFAUL, Capacity: 0.6 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.9 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (E) that indicates the type of capacitor.
2IK6GN-CW2BJ general-purpose motor WK2 series
2IK6GN-SW2B general-purpose motor WK2 series
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
4IK25A-CW2TJ general-purpose motor WK2 series
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
4IK25GN-CW2TJ general-purpose motor WK2 series
4IK25GN-FCH general-purpose motor WK series
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• The product name written on the motor nameplate is 4IK60A-DW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 80 mm
- Output Power: 60 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.54 A
single-Phase 200 VAC / 60 Hz / 0.57 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 160 mN·m
single-Phase 200 VAC / 60 Hz: 160 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 230 mN·m / 2500 r/min
single-Phase 200 VAC / 60 Hz: 190 mN·m / 3000 r/min - capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.8 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Frame Size: 90 mm
- Output Power: 100 W
- series: KIIS series
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.60 A
Three-Phase 200 VAC / 60 Hz / 0.53 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 850 mN·m
Three-Phase 200 VAC / 60 Hz: 700 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 690 mN·m / 1400 r/min
Three-Phase 200 VAC / 60 Hz: 570 mN·m / 1680 r/min - Motor Section Mass: 2.9 kg
[Note]
• No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
• Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
• No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
• Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
5IK100VGVR-JS general-purpose motor K2S series
• The product name written on the motor nameplate is 5IK60A-AW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 100 VAC capacitor included (this product)
U: single-phase 110 VAC/115 VAC capacitor included. (5IK60A-AW2U)
- Frame Size: 90 mm
- Output Power: 60 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 1.2 A
single-Phase 100 VAC / 60 Hz / 1.19 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 320 mN·m
single-Phase 100 VAC / 60 Hz: 320 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 490 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 405 mN·m / 1450 r/min - capacitor: Product name: CH200CFAUL2, Capacity: 20 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 2.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
Items 161 - 180 of 482