Induction motors
Items 11 - 20 of 479
0IK3GN-BW3U general-purpose motor WK2 series
- Frame Size: 42 mm
- Output Power: 200 VAC / 50 Hz: 2.5 W
200 VAC / 60 Hz: 3 W - series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gear head.
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.057 A
single-Phase 200 VAC / 60 Hz / 0.064 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 5 mN·m
single-Phase 200 VAC / 60 Hz: 5 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 9.5 mN·m / 2500 r/min
single-Phase 200 VAC / 60 Hz: 9.5 mN·m / 3100 r/min - The Speed When Installing gearhead:
This depends on the gearhead used.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gear head.
- Permissible Inertia J: Depends on the combination gear head.
- capacitor: Product name: CH045BFAUL, Capacity: 0.45 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Item: Specifications
- Insulation Resistance: After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
- Dielectric Strength: After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
- Temperature Rise: A gearhead or equivalent heat sink* connected to the motor and the winding temperature rise is measured at 75 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity.
- Thermal Class: UL/CSA Standards: 105 (A), EN Standards: 120 (E)
- Overheat Protective Device: Impedance Protected
- Operating Ambient Temperature: -10~+40 °C (Non-freezing)
- Operating Ambient Humidity: 85 % max. (Non-condensing)
- Degree of Protection: IP20
• Description of Specification Items
• The product name written on the motor nameplate is 2IK6A-AW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 100 VAC capacitor included (this product)
U: single-phase 110 VAC/115 VAC capacitor included. (2IK6A-AW2U)
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.199 A
single-Phase 100 VAC / 60 Hz / 0.217 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• The product name written on the motor nameplate is 2IK6A-CW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 200 VAC capacitor included (this product)
E: single-phase 220 VAC/230 VAC capacitor included. (2IK6A-CW2E)
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.1 A
single-Phase 200 VAC / 60 Hz / 0.103 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 45 mN·m
single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 200 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH08BFAUL, Capacity: 0.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 220 VAC / 50 Hz / 0.103 A
single-Phase 220 VAC / 60 Hz / 0.091 A
single-Phase 230 VAC / 50 Hz / 0.107 A
single-Phase 230 VAC / 60 Hz / 0.094 A - Starting Torque (Motor Shaft): single-Phase 220 VAC / 50 Hz: 38 mN·m
single-Phase 220 VAC / 60 Hz: 40 mN·m
single-Phase 230 VAC / 50 Hz: 45 mN·m
single-Phase 230 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 220 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 220 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 230 VAC / 50 Hz: 49 mN·m / 1200 r/min
single-Phase 230 VAC / 60 Hz: 41 mN·m / 1450 r/min - capacitor: Product name: CH06BFAUL, Capacity: 0.6 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.189 A
single-Phase 100 VAC / 60 Hz / 0.192 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 45 mN·m
single-Phase 100 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 40 mN·m / 1450 r/min - capacitor: Product name: CH30FAUL2, Capacity: 3.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.7 kg
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.097 A
single-Phase 200 VAC / 60 Hz / 0.096 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 40 mN·m
single-Phase 200 VAC / 60 Hz: 40 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 50 mN·m / 1200 r/min
single-Phase 200 VAC / 60 Hz: 40 mN·m / 1450 r/min - capacitor: Product name: CH075BFAUL, Capacity: 0.75 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.7 kg
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Items 11 - 20 of 479