Housings
Items 1 - 5 of 5
In stock
TA124 ABS PCB enclosure, TECHNOCASE type
Machined version with 230V main switch and red operating indicator
Holes for start switch and speed potentiometer
Internal dimensions 208x113x82 mm; external dimensions LxBxH 240x120x90 mm; mounting dimensions 226x106 mm
Front already machined for switch installation: 2x round, 1x rectangular
Material no. 201.124.000
Degree of protection: IP 66; concealed cover screws for a distinctive design; halogen-free ABS, -40°C to +80°C; captive stainless-steel cover screws; fully insulated according to VDE 0100; moulded silicone seal (-40°C to +120°C); separate screw channels outside the sealing area
In stock
External dimensions in mm LxBxH 360x200x150 Interior dimensions in mm LxBxH 315x190x142 Lightweight plastic housing for industrial applications; Plastic housing with high protection Individual built-in parts by domes in the lower part; IP 66, EN 60529; Surface resistance 4 x 1014 Ohm, VDE 0303 DIN 53486; dielectric strength 24 KV/mm, VDE 3030 DIN 53481; Insulation with full protection insulation, VDE 0100; burning behavior HB, UL 94; water absorption max. 0,2%, DIN 53495; toxic behaviour halogen-free; seals and temperature resistance CR seal, −40° C to +80° C; Colouration of light gray similar to RAL 7035
Sale 66%
The ZAG is a marine-grade aluminium enclosure for demanding industrial applications and provides high corrosion resistance.
External dimensions (L × W × D): 260 × 160 × 90 mm; internal dimensions (H × D × W): 150 × 83 × 220 mm
Degree of protection: IP66 with silicone cover gasket (labyrinth sealing system)
Temperature resistance: −40 °C to +80 °C
Captive stainless-steel cover screws
Standard colour: RAL 7001
Wall mounting via integrated screw channels outside the interior
Mounting plates, printed circuit boards and DIN rails can be secured in threaded holes in the base ribs
Aluminium alloy: Al-Si 12 (LM24)
Machining performed:
Aluminium base: 3 × PG 11 and 6 × M3
Cover to drawing W61-037 H, with openings for:
• 1 × on/off switch
• 1 × indicator light
• 1 × clockwise/counterclockwise selector switch
• 1 × potentiometer
• 1 × nameplate with three mounting holes
In stock
AK 163 aluminium enclosure; Series: aluKOM
External dimensions: LxBxH 360x160x90 mm; Internal dimensions: 318x149x81.5 mm
The enclosure is unmachined
R090/Article no. 106.163.000
Degree of protection: IP 66; aluminium casting alloy: EN AC-44300 DIN EN 1706; (GD Al Si 12 / DIN 1725); draft angle 1°; the internal clear dimensions reduce circumferentially by 1° toward the enclosure base; captive stainless-steel cover screws; seal: tongue-and-groove system with groove in the cover and oil- and petrol-resistant chloroprene seal (-30°C to + 100°C); temperature resistance -30°C to +100°C; mounting via separate screw channels; components: mounting points in the side ribs with threaded blind holes in the enclosure base.
In stock
AH 164 aluminium enclosure; Series: aluNORM
External dimensions: LxBxH 320x160x133 mm; Internal dimensions: 280x149x125 mm
The enclosure is unmachined
R090/Article no. 103.164.000
Degree of protection: IP 66; aluminium casting alloy: EN AC-44300 DIN EN 1706; (GD Al Si 12 / DIN 1725); draft angle 1°; the internal clear dimensions reduce circumferentially by 1° toward the enclosure base; captive stainless-steel cover screws; seal: tongue-and-groove system with groove in the cover and oil- and petrol-resistant chloroprene seal (-30°C to + 100°C); temperature resistance -30°C to +100°C; mounting via separate screw channels; components: mounting points in the side ribs with threaded blind holes in the enclosure base.
Items 1 - 5 of 5