HM series
Three-phase motors for operation with our frequency inverters, up to a maximum speed of 30,000 min-1. Available in air-cooled or water-cooled versions.
6.00 kW S1-100%; 220 V3AC; 18000 min-1; 300 Hz; 3.18 Nm; 21.8 A
7.20 kW S6-040% 220 V3AC; 18000 min-1; 300 Hz; 3.82 Nm; 26.8 A
5.50 kW S1-100%; 220 V3AC; 24000 min-1; 400 Hz; 2.19 Nm; 20.8 A
6.50 kW S6-040% 220 V3AC; 24000 min-1; 400 Hz; 2.59 Nm; 24.2 A
eta 0,82, cos phi 0,86; Wave thread right/direction of rotation left
Degree of protection IP50; double bearing (A-side) for, among other things, milling applications
insulation class F; terminal box at the top; Mounting at bottom
with bimetal temperature switch
Type ER32 DIN 6499 shaft with nut, without collet
7,0 kW S1/100%; 220/380 V 3AC; 14.000 1/min; 467 Hz; 4,8 Nm; 28,7/16,6 A
10,0 kW S6/40%; 220/380 V 3AC; 14.000 1/min; 467 Hz; 6,9 Nm; 41,0/23,7 A
7,0 kW S1/100%; 220/380 V 3AC; 18.000 1/min; 600 Hz; 3,7 Nm; 28,7/16,6 A
10,0 kW S6/40%; 220/380 V 3AC; 18.000 1/min; 600 Hz; 5,3 Nm; 41,0/23,7 A
6,0 kW S1/100%; 220/380 V 3AC; 24.000 1/min; 800 Hz; 2,4 Nm; 26,0/15,0 A
8,6 kW S6/40%; 220/380 V 3AC; 24.000 1/min; 800 Hz; 3,4 Nm; 37,0/21,4 A
efficiency 0,82; power factor 0,86; Wave thread on the right/direction of rotation on the left
Degree of protection IP50; 4-pole; Insulation class F; Mounting at bottom
With bi-metal temperature switch
A-side with angular ball bearings; B-side with deep-groove ball bearing
For constant torque until standstill
With external cooling, axial fan 92×92×38 mm, 6000 min−1
„3214 JN“ ebm-papst 24 VDC 0,27 A 6,5 W (11…28 VDC)
noise level 51 dB; temperature range –20 … +70 °C
Volume flow rate 130 m3/h
Life L10 at 40 °C: 70 000 h
Engine protection: Reversal of polarity and blocking protection
Authorisations: VDE, CSA, UL