Gearhead
Items 161 - 200 of 219
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVR gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 60
- Rotation Direction: opposite direction as the motor
- Mass: 1.4 kg
5GE25SA parallel-shaft gearhead NEW GE series
5GN36RAA right-angle gearhead RA series
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Gear Ratio: 250
- Rotation Direction: same direction as the motor shaft
- Mass: 1.4 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Gear Ratio: 300
- Rotation Direction: same direction as the motor shaft
- Mass: 1.4 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVH gearhead
- Gear Ratio: 250
- Rotation Direction: same direction as the motor shaft
- Mass: 1.4 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVH gearhead
- Gear Ratio: 300
- Rotation Direction: same direction as the motor shaft
- Mass: 1.4 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVR gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 100
- Rotation Direction: opposite direction as the motor
- Mass: 1.5 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVR gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 120
- Rotation Direction: same direction as the motor shaft
- Mass: 1.5 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVR gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 150
- Rotation Direction: same direction as the motor shaft
- Mass: 1.5 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVR gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 180
- Rotation Direction: same direction as the motor shaft
- Mass: 1.5 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVR gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 75
- Rotation Direction: opposite direction as the motor
- Mass: 1.5 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVR gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 90
- Rotation Direction: opposite direction as the motor
- Mass: 1.5 kg
5GE180SA parallel-shaft gearhead NEW GE series
5GN180RAA right-angle gearhead RA series
5GE12.5RA right-angle gearhead RA series
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
5GE3.6RA right-angle gearhead RA series
- Frame Size: 90 mm
- Shaft/Gear Type: Right-Angle Shaft Solid Shaft gearhead
- Gear Ratio: 3
- Rotation Direction: opposite direction as the motor shaft
- Mass: 2.5 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Right-Angle Shaft Solid Shaft gearhead
- Gear Ratio: 5
- Rotation Direction: opposite direction as the motor shaft
- Mass: 2.5 kg
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 90 mm
- Shaft/Gear Type: Right-Angle Shaft Solid Shaft gearhead
- Gear Ratio: 7.5
- Rotation Direction: opposite direction as the motor shaft
- Mass: 2.5 kg
5GE9RA right-angle gearhead RA series
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 250
- Rotation Direction: same direction as the motor shaft
- Mass: 1.4 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GV gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 300
- Rotation Direction: same direction as the motor shaft
- Mass: 1.4 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVH gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 250
- Rotation Direction: same direction as the motor shaft
- Mass: 1.4 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Parallel Shaft GVH gearhead
- Shaft Material: Stainless steel
- Gear Ratio: 300
- Rotation Direction: same direction as the motor shaft
- Mass: 1.4 kg
- Frame Size: 90 mm
- Shaft/Gear Type: Right-Angle Shaft Solid Shaft gearhead
- Gear Ratio: 100
- Rotation Direction: opposite direction as the motor shaft
- for motor 60 W or 90 W
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm, 60 W or 90 W
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 90 mm
- Shaft/Gear Type: Right-Angle Shaft Hollow Shaft gearhead
- Gear Ratio: 12.5
- Rotation Direction: opposite direction as the motor shaft
- Mass: 2.5 kg
Items 161 - 200 of 219