AC speed-control motors
Items 961 - 1000 of 1499
SCM26ECM-9 speed-control motor with electromagnetic brake MOTOR FOR K2 UNIT(CN
SCM26JCM-12.5 speed-control motor with electromagnetic brake MOTOR FOR K2 UNIT(CN
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 15
- capacitor: Product Name: CH08BFAUL, Capacitance: 0.8 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: single-Phase 200 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 1.5 kg (including gearhead）
SCM26JCM-18 speed-control motor with electromagnetic brake MOTOR FOR K2 UNIT(CN
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 7.5
- capacitor: Product Name: CH08BFAUL, Capacitance: 0.8 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: single-Phase 200 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 1.5 kg (including gearhead）
SCM26JCM-9 speed-control motor with electromagnetic brake MOTOR FOR K2 UNIT(CN
- Frame Size: 90 mm
- Maximum Output Power: 40 W
- Time Rating: Continuous
- Motor Type: Induction Motor
- Shaft/Gear Type: Round Shaft Type
- Gear Ratio: -
- Voltage/ Frequency/ Current/ Power Consumption: Single-Phase110 VAC / 60 Hz / 1.1 A / 102 W
single-Phase 115 VAC / 60 Hz / 1.1 A / 105 W - Starting Torque (Motor Shaft): Single-Phase110 VAC / 60 Hz: 180 mN·m
single-Phase 115 VAC / 60 Hz: 180 mN·m - Speed Control Range: 60Hz: 90-1600r/min
- Permissible Torque (Motor Shaft): single-Phase 115 VAC / 60 Hz, Setting speed90 r/min: 70 mN·m
Single-Phase110 VAC / 60 Hz, Setting speed1200 r/min: 260 mN·m
single-Phase 115 VAC / 60 Hz, Setting speed1200 r/min: 260 mN·m - Speed Setting Methods: Control Circuitpotentiometer on front panel
- Function: Speed Controller
- Maximum Extension Distance: Between Motor and Circuit 4.75 m
- Overheat Protective Device Type: Thermal protector
- Motor Section Mass: 2.6 kg
- Circuit Mass: 0.45 kg
• Certification for various safety standards is obtained for the motor unit product name and the circuit unit product name.
• The speed control range is the value at no load.
[Note]
• This indicates that there is a built-in thermal protector (automatic return type).If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the motor restarts automatically. Be sure to turn the power supply off before inspecting.
US540-401U2 speed-control motor US series(OVERSEAS V
USM560-001W-1 speed-control motor US series(OVERSEAS V
USM560-501W-1 speed-control motor US series(OVERSEAS V
SCM26JAM-12.5 speed-control motor with electromagnetic brake MOTOR FOR K2 UNIT(CN
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 15
- capacitor: Product Name: CH35FAUL2, Capacitance: 3.5 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: single-Phase 100 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 1.5 kg (including gearhead）
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 18
- capacitor: Product Name: CH35FAUL2, Capacitance: 3.5 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: single-Phase 100 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 1.5 kg (including gearhead）
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 7.5
- capacitor: Product Name: CH35FAUL2, Capacitance: 3.5 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: single-Phase 100 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 1.5 kg (including gearhead）
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 9
- capacitor: Product Name: CH35FAUL2, Capacitance: 3.5 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: single-Phase 100 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 1.5 kg (including gearhead）
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 12.5
- capacitor: Product Name: CH25FAUL2, Capacitance: 2.5 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: single-Phase 110/115VAC 60 Hz
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 1.5 kg (including gearhead）
SCM26UAM-15 speed-control motor with electromagnetic brake MOTOR FOR K2 UNIT(CN
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 18
- capacitor: Product Name: CH25FAUL2, Capacitance: 2.5 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: single-Phase 110/115VAC 60 Hz
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 1.5 kg (including gearhead）
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 7.5
- capacitor: Product Name: CH25FAUL2, Capacitance: 2.5 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: single-Phase 110/115VAC 60 Hz
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 1.5 kg (including gearhead）
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 9
- capacitor: Product Name: CH25FAUL2, Capacitance: 2.5 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: single-Phase 110/115VAC 60 Hz
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 1.5 kg (including gearhead）
SCM540KECM speed-control motor with electromagnetic brake MOTOR FOR K2 UNIT(CN
- Frame Size: 90 mm
- Maximum Output Power: 40 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/ Gear Type: Round Shaft (with key )
- Gear Ratio: -
- Rotation Direction: Depends on the combination gear head.
- capacitor: Product Name: CH30BFAUL, Capacitance: 3.0 µF, Rated Voltage: 450 VAC
- Mass: 3.2 kg
SCM540EC-100 speed-control motor MOTOR FOR K2 UNIT(CN
- Frame Size: 90 mm
- Output Power: 40 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Induction Motor
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 120
- capacitor: Product Name: CH23BFAUL, Capacitance: 2.3 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: single-Phase 220/230 VAC 50/60 Hz
- Overheat Protective Device Type: Thermal protector
- Motor Section Mass: 4.0 kg (including gearhead）
SCM540EC-150 speed-control motor MOTOR FOR K2 UNIT(CN
SCM540EC-180 speed-control motor MOTOR FOR K2 UNIT(CN
- Frame Size: 90 mm
- Output Power: 40 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Induction Motor
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 50
- capacitor: Product Name: CH23BFAUL, Capacitance: 2.3 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: single-Phase 220/230 VAC 50/60 Hz
- Overheat Protective Device Type: Thermal protector
- Motor Section Mass: 3.9 kg (including gearhead）
SCM540EC-60 speed-control motor MOTOR FOR K2 UNIT(CN
SCM540EC-75 speed-control motor MOTOR FOR K2 UNIT(CN
SCM540EC-90 speed-control motor MOTOR FOR K2 UNIT(CN
- Frame Size: 90 mm
- Output Power: 40 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Induction Motor
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 100
- capacitor: Product Name: CH30BFAUL, Capacitance: 3.0 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: single-Phase 200 VAC 50/60 Hz
- Overheat Protective Device Type: Thermal protector
- Motor Section Mass: 3.9 kg (including gearhead）
SCM540JC-120 speed-control motor MOTOR FOR K2 UNIT(CN
- Frame Size: 90 mm
- Output Power: 40 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Induction Motor
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 150
- capacitor: Product Name: CH30BFAUL, Capacitance: 3.0 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: single-Phase 200 VAC 50/60 Hz
- Overheat Protective Device Type: Thermal protector
- Motor Section Mass: 4.0 kg (including gearhead）
SCM540JC-180 speed-control motor MOTOR FOR K2 UNIT(CN
SCM540JC-50 speed-control motor MOTOR FOR K2 UNIT(CN
SCM540JC-60 speed-control motor MOTOR FOR K2 UNIT(CN
SCM540JC-75 speed-control motor MOTOR FOR K2 UNIT(CN
- Frame Size: 90 mm
- Output Power: 40 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Induction Motor
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 90
- capacitor: Product Name: CH30BFAUL, Capacitance: 3.0 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: single-Phase 200 VAC 50/60 Hz
- Overheat Protective Device Type: Thermal protector
- Motor Section Mass: 3.9 kg (including gearhead）
- Frame Size: 90 mm
- Maximum Output Power: 40 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/ Gear Type: Pinion Shaft Type
- Gear Ratio: -
- Rotation Direction: Depends on the combination gear head.
- capacitor: Product Name: CH23BFAUL, Capacitance: 2.3 µF, Rated Voltage: 450 VAC
SCM540GV-JCM speed-control motor with electromagnetic brake MOTOR FOR K2 UNIT(CN
Items 961 - 1000 of 1499