4Q for battery voltage

Motor In/Imax 5s: 25 A / 50 A

Maximum Motor power: 1,15 kW

Input voltage: 24 to 62 Vdc (option 12 Vdc)

Degree of protection: IP53

Control range: 1:1000; Control accuracy ±0,5% o. Actual value error

Dimensions HxBxT: 120x137x70 mm without plug

Setpoint value specification Speed and current limitation ±10V via optional 5 kOhm potentiometer or via setpoint current 0...±20 mA

Reversal of the direction of rotation with bipolar setpoint value or sep. Predetermination of the direction of rotation

Speed control and/or current control (torque control) 

Combined speed current control (specify when ordering)

Static and dynamic current limit (temperature control)

Measurement outputs for current and speed

Brake logic, main protector logic, release logic with quick stop

Power electronics with IGBT power semiconductors, generously dimensioned
(Attention:) no reverse polarity protection possible, output stage can be destroyed

DC tachogenerator connectable at maximum speed min 5 VDC, max 25 VDC at higher voltages

Motor In/Imax 5s: 050 A / 100 A Input voltage: 12 to 48 VDC Auxiliary voltage connection required: 24VDC ±20% max. 0,5A, waviness <20% Ausgangsspannung max. : 0,95 x Eingangsspannung degree of protection : IP53 Feuchtebeanspruchung : Klasse F nach DIN 40040 keine Betauung; Betriebsbereich : 0…45°C (60°C); Temperaturüberwachung 80°C Regelbereich : 1:1000; Regelgenauigkeit ±0,5% o. Istwertfehler Querschnitt Anschluß : Batterie min. 35 mm² bei 2 m (>5m additional capacitors required; Motor min 25 mm2; Safety 200 A Dimensions HxBxT: 120x137x70 mm The cooling plate can dissipate only a small power loss (about 50W). Further power loss must be dissipated through the mounting surface or an additional cooler (steel sheet is a poor heat conductor). - When energy is returned, ensure that the intermediate circuit overvoltage is limited to 20% and the power connection is not disconnected (throughput current = appliance peak current); Safeguarding with reverse current protective diode D1 - Setting the target value Speed and current limitation ±10V via optional 5 kOhm potentiometer or by reference value current 0...±20 mA - reversal of the direction of rotation with bipolar setpoint value or sep. Predetermination of the direction of rotation - speed control and/or current control (torque control) - combined speed current control (specify when ordering) - Static and dynamic current limit (temperature control) - Measurement outputs for current and speed - Brake logic, main protector logic, release logic with quick stop Power electronics with IGBT power semiconductors, generously dimensioned (Attention:) no reverse polarity protection possible, output stage can be destroyed DC tachogenerator connectable at maximum speed min 5 VDC, max 25 VDC Use series resistor at higher voltages incl. German installation and operating instructions When ordering, specify the exact battery and motor voltage!

Motor In/Imax 5s: 100 A / 200 A

Maximum Motor power: 4,4 kW

Input voltage: 24 to 62 Vdc (option 12 Vdc)

Degree of protection: IP53

Control range: 1:1000; Control accuracy ±0,5% o. Actual value error

Dimensions HxBxT: 120x137x70 mm without plug

Setpoint value specification Speed and current limitation ±10V via optional 5 kOhm potentiometer or via setpoint current 0...±20 mA

Reversal of the direction of rotation with bipolar setpoint value or sep. Predetermination of the direction of rotation

Speed control and/or current control (torque control) 

Combined speed current control (specify when ordering)

Static and dynamic current limit (temperature control)

Measurement outputs for current and speed

Brake logic, main protector logic, release logic with quick stop

Power electronics with IGBT power semiconductors, generously dimensioned
(Attention:) no reverse polarity protection possible, output stage can be destroyed

DC tachogenerator connectable at maximum speed min 5 VDC, max 25 VDC at higher voltages