ORIENTAL MOTOR
Items 9901 - 9950 of 16597
ARM98AK-T7.2 ALPHA STEP AR series DC TYPE
Description of Specification Items
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Maximum Holding Torque: 14 N·m
- Rotor Inertia J: 1090×10-7 kg·m2
- Gear Ratio: 10
- Resolution at 1000P/R Setting: 0.036°/pulse ※
- Permissible Torque: 14 N·m
- Maximum Instantaneous Torque: 20 N·m
- Holding Torque at Motor Standstill When Energized: 10 N·m
- Speed Range: 0–300 r/min
- Backlash: 15 arcmin (0.25°)
- Motor Section Mass: 3.1 kg
※ For SSCNETIII/H Compatible driver, the resolution is fixed to 10000 P/R.
AZM98AC-TS10L ALPHA STEP AZ series AC TYPE
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Maximum Holding Torque: 14 N·m
- Rotor Inertia J: 1090×10-7 kg·m2
- Gear Ratio: 10
- Resolution at 1000P/R Setting: 0.036°/pulse ※
- Permissible Torque: 14 N·m
- Maximum Instantaneous Torque: 20 N·m
- Holding Torque at Motor Standstill When Energized: 10 N·m
- Speed Range: 0–300 r/min
- Backlash: 15 arcmin (0.25°)
- Motor Section Mass: 3.1 kg
※ For SSCNETIII/H Compatible driver, the resolution is fixed to 10000 P/R.
AZM98AC-TS10U ALPHA STEP AZ series AC TYPE
AZM98AC-TS20 ALPHA STEP AZ series AC TYPE
AZM98AC-TS20L ALPHA STEP AZ series AC TYPE
AZM98AC-TS20R ALPHA STEP AZ series AC TYPE
AZM98AC-TS20U ALPHA STEP AZ series AC TYPE
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Maximum Holding Torque: 6 N·m
- Rotor Inertia J: 1090×10-7 kg·m2
- Gear Ratio: 3.6
- Resolution at 1000P/R Setting: 0.1°/pulse ※
- Permissible Torque: 6 N·m
- Maximum Instantaneous Torque: Refer to the characteristics diagram
- Holding Torque at Motor Standstill When Energized: 3.6 N·m
- Speed Range: 0–833 r/min
- Backlash: 25 arcmin (0.42°)
- Motor Section Mass: 3.1 kg
※ For SSCNETIII/H Compatible driver, the resolution is fixed to 10000 P/R.
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Maximum Holding Torque: 6 N·m
- Rotor Inertia J: 1090×10-7 kg·m2
- Gear Ratio: 3.6
- Resolution at 1000P/R Setting: 0.1°/pulse ※
- Permissible Torque: 6 N·m
- Maximum Instantaneous Torque: Refer to the characteristics diagram
- Holding Torque at Motor Standstill When Energized: 3.6 N·m
- Speed Range: 0–833 r/min
- Backlash: 25 arcmin (0.42°)
- Motor Section Mass: 3.1 kg
※ For SSCNETIII/H Compatible driver, the resolution is fixed to 10000 P/R.
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Maximum Holding Torque: 6 N·m
- Rotor Inertia J: 1090×10-7 kg·m2
- Gear Ratio: 3.6
- Resolution at 1000P/R Setting: 0.1°/pulse ※
- Permissible Torque: 6 N·m
- Maximum Instantaneous Torque: Refer to the characteristics diagram
- Holding Torque at Motor Standstill When Energized: 3.6 N·m
- Speed Range: 0–833 r/min
- Backlash: 25 arcmin (0.42°)
- Motor Section Mass: 3.1 kg
※ For SSCNETIII/H Compatible driver, the resolution is fixed to 10000 P/R.
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Maximum Holding Torque: 6 N·m
- Rotor Inertia J: 1090×10-7 kg·m2
- Gear Ratio: 3.6
- Resolution at 1000P/R Setting: 0.1°/pulse ※
- Permissible Torque: 6 N·m
- Maximum Instantaneous Torque: Refer to the characteristics diagram
- Holding Torque at Motor Standstill When Energized: 3.6 N·m
- Speed Range: 0–833 r/min
- Backlash: 25 arcmin (0.42°)
- Motor Section Mass: 3.1 kg
※ For SSCNETIII/H Compatible driver, the resolution is fixed to 10000 P/R.
AZM98AC-TS30 ALPHA STEP AZ series AC TYPE
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Maximum Holding Torque: 25 N·m
- Rotor Inertia J: 1090×10-7 kg·m2
- Gear Ratio: 30
- Resolution at 1000P/R Setting: 0.012°/pulse ※
- Permissible Torque: 25 N·m
- Maximum Instantaneous Torque: 45 N·m
- Holding Torque at Motor Standstill When Energized: 25 N·m
- Speed Range: 0–100 r/min
- Backlash: 10 arcmin (0.17°)
- Motor Section Mass: 3.1 kg
※ For SSCNETIII/H Compatible driver, the resolution is fixed to 10000 P/R.
AZM98AC-TS30R ALPHA STEP AZ series AC TYPE
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Maximum Holding Torque: 25 N·m
- Rotor Inertia J: 1090×10-7 kg·m2
- Gear Ratio: 30
- Resolution at 1000P/R Setting: 0.012°/pulse ※
- Permissible Torque: 25 N·m
- Maximum Instantaneous Torque: 45 N·m
- Holding Torque at Motor Standstill When Energized: 25 N·m
- Speed Range: 0–100 r/min
- Backlash: 10 arcmin (0.17°)
- Motor Section Mass: 3.1 kg
※ For SSCNETIII/H Compatible driver, the resolution is fixed to 10000 P/R.
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Maximum Holding Torque: 10 N·m
- Rotor Inertia J: 1090×10-7 kg·m2
- Gear Ratio: 7.2
- Resolution at 1000P/R Setting: 0.05°/pulse ※
- Permissible Torque: 10 N·m
- Maximum Instantaneous Torque: Refer to the characteristics diagram
- Holding Torque at Motor Standstill When Energized: 7.2 N·m
- Speed Range: 0–416 r/min
- Backlash: 15 arcmin (0.25°)
- Motor Section Mass: 3.1 kg
※ For SSCNETIII/H Compatible driver, the resolution is fixed to 10000 P/R.
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Maximum Holding Torque: 10 N·m
- Rotor Inertia J: 1090×10-7 kg·m2
- Gear Ratio: 7.2
- Resolution at 1000P/R Setting: 0.05°/pulse ※
- Permissible Torque: 10 N·m
- Maximum Instantaneous Torque: Refer to the characteristics diagram
- Holding Torque at Motor Standstill When Energized: 7.2 N·m
- Speed Range: 0–416 r/min
- Backlash: 15 arcmin (0.25°)
- Motor Section Mass: 3.1 kg
※ For SSCNETIII/H Compatible driver, the resolution is fixed to 10000 P/R.
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Maximum Holding Torque: 10 N·m
- Rotor Inertia J: 1090×10-7 kg·m2
- Gear Ratio: 7.2
- Resolution at 1000P/R Setting: 0.05°/pulse ※
- Permissible Torque: 10 N·m
- Maximum Instantaneous Torque: Refer to the characteristics diagram
- Holding Torque at Motor Standstill When Energized: 7.2 N·m
- Speed Range: 0–416 r/min
- Backlash: 15 arcmin (0.25°)
- Motor Section Mass: 3.1 kg
※ For SSCNETIII/H Compatible driver, the resolution is fixed to 10000 P/R.
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Maximum Holding Torque: 10 N·m
- Rotor Inertia J: 1090×10-7 kg·m2
- Gear Ratio: 7.2
- Resolution at 1000P/R Setting: 0.05°/pulse ※
- Permissible Torque: 10 N·m
- Maximum Instantaneous Torque: Refer to the characteristics diagram
- Holding Torque at Motor Standstill When Energized: 7.2 N·m
- Speed Range: 0–416 r/min
- Backlash: 15 arcmin (0.25°)
- Motor Section Mass: 3.1 kg
※ For SSCNETIII/H Compatible driver, the resolution is fixed to 10000 P/R.
- Type: Connection cable Set for RKII series (with Encoder)
- Connection Point: Motor~circuit
- cable Type: Standard
- Length: 20 m
DGII hollow-shaft actuator: direct mounting, high rigidity and precise positioning (up to ±15 arcsec). The data sheet is authoritative.
- Equipped Motor: αSTEP AZ series
- Motor Direction: Motor vertical mounting
- cable Outlet Direction: Down Side
- Motor Configuration: With Electromagnetic Brake Type
- Type of Output Table Supporting Bearing: Cross-Roller Bearing
- Electromagnetic Brake: Equipped
- Repetitive Positioning Accuracy: ±15 arcsec (±0.004°)
- Lost Motion: 2 arcmin (0.033°)
- Angular Transmission Accuracy: 3 arcmin (0.05°)
- Minimum Displacement of Output Table: 0.01 deg/STEP
- Holding Torque at Motor Standstill When Energized: 12 N·m
- Holding Torque at Motor Standstill Electromagnetic Brake: 12 N·m
- Permissible Torque: 12 N·m
- Max. Speed: 1200 deg/s (200 r/min)
- Inertia J: 199220×10-7 kg·m2
- Gear Ratio: 18
- Permissible Axial Load: 2000 N
- Permissible Moment: 160 N·m
- Runout of Output Table Surface: 0.015 mm
- Runout of Output Table Inner (Outer) Diameter: 0.015 mm
- Parallelism of Output Table: 0.030 mm
- Actuator Part Thermal Class: 130 (B) [UL/CSA 105 (A) certified]
- Actuator Part Degree of Protection: IP40 (IP20 for motor connector)
- Equipped Motor: αSTEP AZ series
- Motor Direction: Motor vertical mounting
- cable Outlet Direction: Down Side
- Motor Configuration: With Electromagnetic Brake Type
- Type of Output Table Supporting Bearing: Cross-Roller Bearing
- Electromagnetic Brake: Equipped
- Repetitive Positioning Accuracy: ±15 arcsec (±0.004°)
- Lost Motion: 2 arcmin (0.033°)
- Angular Transmission Accuracy: 3 arcmin (0.05°)
- Minimum Displacement of Output Table: 0.01 deg/STEP
- Holding Torque at Motor Standstill When Energized: 9 N·m
- Holding Torque at Motor Standstill Electromagnetic Brake: 9 N·m
- Permissible Torque: 12 N·m
- Max. Speed: 900 deg/s (150 r/min)
- Inertia J: 199220×10-7 kg·m2
- Gear Ratio: 18
- Permissible Axial Load: 2000 N
- Permissible Moment: 160 N·m
- Runout of Output Table Surface: 0.015 mm
- Runout of Output Table Inner (Outer) Diameter: 0.015 mm
- Parallelism of Output Table: 0.030 mm
- Actuator Part Thermal Class: 130 (B) [UL/CSA 105 (A) certified]
- Actuator Part Degree of Protection: IP40 (IP20 for motor connector)
- Actuator Part Mass: 3.1 kg
The UL mark of the actuator is made by the motor product name, not the actuator product name.
• When the motor is operated from 48 VDC input, as a reference, use an inertial load 10 times the rotor inertial ratio or less and twice the safety factor or more when calculating the acceleration torque.
[Note]
• The accuracy is measured at a constant temperature (normal ambient temperature) under a constant load.
• The motor part cannot be removed.
- Motor Type: αSTEP AZ series
- Direction of Motion: Parallel to the mounting foot surface
- Frame Size: 60 mm
- Stroke: 600 mm
- Electromagnetic Brake: Equipped
- Rack Permissible Rotational Torque (Moment): 0.3 N·m max.
- Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5%
- Electromagnetic Brake Power Supply Input Current: 0.25 A
- Rack and Pinion Motor Mass: 3.1 kg (Rack Mass Included)
- Rack Mass: 1.4 kg
* This is done by motor product name, not by actuator product name.
- Motor Type: αSTEP AZ series
- Direction of Motion: Vertical to the mounting foot surface
- Frame Size: 60 mm
- Stroke: 600 mm
- Electromagnetic Brake: Equipped
- Rack Permissible Rotational Torque (Moment): 0.3 N·m max.
- Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5%
- Electromagnetic Brake Power Supply Input Current: 0.25 A
- Rack and Pinion Motor Mass: 3.1 kg (Rack Mass Included)
- Rack Mass: 1.4 kg
* This is done by motor product name, not by actuator product name.
- Motor Type: αSTEP AZ series
- Direction of Motion: Parallel to the mounting foot surface
- Frame Size: 80 mm
- Stroke: 200 mm
- Electromagnetic Brake: Not Equipped
- Rack Permissible Rotational Torque (Moment): 0.5 N·m max.
- Rack and Pinion Motor Mass: 3.1 kg (Rack Mass Included)
- Rack Mass: 1.0 kg
* This is done by motor product name, not by actuator product name.
LM4F500AZAC-2 high-speed rack-and-pinion actuator αSTEP AZ-series
- series: MB series
- Type: Fan Only
- Size: Impeller Diameter ø120 mm
- Speed Control: None
- Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC/ 50 Hz / 0.6 A / 100 W
single-Phase 200 VAC/ 60 Hz / 0.8 A / 145 W
single-Phase 220 VAC/ 60 Hz / 0.8 A / 145 W
single-Phase 230 VAC/ 50 Hz / 0.6 A / 110 W
single-Phase 230 VAC/ 60 Hz / 0.8 A / 150 W - Operating Voltage Range: ±10%
- Rotation Speed: single-Phase 200 VAC / 50 Hz: 2850 r/min
single-Phase 200 VAC / 60 Hz: 3200 r/min
single-Phase 220 VAC / 60 Hz: 3300 r/min
single-Phase 230 VAC / 50 Hz: 2900 r/min
single-Phase 230 VAC / 60 Hz: 3300 r/min - Maximum Air Flow: single-Phase 200 VAC / 50 Hz: 4.4 m3/min
single-Phase 200 VAC / 60 Hz: 4.9 m3/min
single-Phase 220 VAC / 60 Hz: 5.1 m3/min
single-Phase 230 VAC / 50 Hz: 4.5 m3/min
single-Phase 230 VAC / 60 Hz: 5.2 m3/min - Maximum Static Pressure: single-Phase 200 VAC / 50 Hz: 314 Pa
single-Phase 200 VAC / 60 Hz: 451 Pa
single-Phase 220 VAC / 60 Hz: 451 Pa
single-Phase 230 VAC / 50 Hz: 314 Pa
single-Phase 230 VAC / 60 Hz: 451 Pa - Noise Level: single-Phase 200 VAC / 50 Hz: 67 dB (A)
single-Phase 200 VAC / 60 Hz: 69 dB (A)
single-Phase 220 VAC / 60 Hz: 71 dB (A)
single-Phase 230 VAC / 50 Hz: 67 dB (A)
single-Phase 230 VAC / 60 Hz: 71 dB (A) - Capacitance: 2.0 µF
- Materials: Motor Case: Aluminum die cast
Casing: Aluminum die cast
Impeller: Aluminum - Overheat Protection: Built-In Thermal Protector
- Bearing: Ball bearings
- Mass: 4 kg
PK299DW 2-phase stepper motor PK series
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Rotor Inertia J: 1100×10-7 kg·m2
- Gear Ratio: 10
- Basic Step Angle: 0.072°
- Backlash: 15 arcmin (0.25°)
- Rated Current: 0.75 A/Phase
- Motor Section Mass: 3.1 kg
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Rotor Inertia J: 1100×10-7 kg·m2
- Gear Ratio: 20
- Basic Step Angle: 0.036°
- Backlash: 10 arcmin (0.17°)
- Rated Current: 0.75 A/Phase
- Motor Section Mass: 3.1 kg
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Rotor Inertia J: 1100×10-7 kg·m2
- Gear Ratio: 3.6
- Basic Step Angle: 0.2°
- Backlash: 25 arcmin (0.42°)
- Rated Current: 0.75 A/Phase
- Motor Section Mass: 3.1 kg
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: single Shaft
- Electromagnetic Brake: Not Equipped
- Rotor Inertia J: 1100×10-7 kg·m2
- Gear Ratio: 30
- Basic Step Angle: 0.024°
- Backlash: 10 arcmin (0.17°)
- Rated Current: 0.75 A/Phase
- Motor Section Mass: 3.1 kg
PKE596AC-TS7.2 5-phase stepper motor RK2 series
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: double Shaft
- Electromagnetic Brake: Not Equipped
- Rotor Inertia J: 1100×10-7 kg·m2
- Gear Ratio: 10
- Basic Step Angle: 0.072°
- Backlash: 15 arcmin (0.25°)
- Rated Current: 0.75 A/Phase
- Motor Section Mass: 3.1 kg
PKE596BC-TS20 5-phase stepper motor RK2 series
PKE596BC-TS3.6 5-phase stepper motor RK2 series
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: double Shaft
- Electromagnetic Brake: Not Equipped
- Rotor Inertia J: 1100×10-7 kg·m2
- Gear Ratio: 30
- Basic Step Angle: 0.024°
- Backlash: 10 arcmin (0.17°)
- Rated Current: 0.75 A/Phase
- Motor Section Mass: 3.1 kg
- Frame Size: 90 mm
- Type: TS Geared
- Shaft Type: double Shaft
- Electromagnetic Brake: Not Equipped
- Rotor Inertia J: 1100×10-7 kg·m2
- Gear Ratio: 7.2
- Basic Step Angle: 0.1°
- Backlash: 15 arcmin (0.25°)
- Rated Current: 0.75 A/Phase
- Motor Section Mass: 3.1 kg
PKE599RC2 5-phase stepper motor RK2 series
- Frame Size: 80 mm
- Output Power: 25 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 100
- capacitor: Product Name: CH15BFAUL, Capacitance: 1.5 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: single-Phase 220/230 VAC 50/60 Hz
- Overheat Protective Device Type: Thermal protector
- Motor Section Mass: 3.1 kg (including gearhead）
SCM425ECM-120 speed-control motor with electromagnetic brake MOTOR FOR K2 UNIT(CN
- Frame Size: 80 mm
- Output Power: 25 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 30
- capacitor: Product Name: CH15BFAUL, Capacitance: 1.5 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: single-Phase 220/230 VAC 50/60 Hz
- Overheat Protective Device Type: Thermal protector
- Motor Section Mass: 3.1 kg (including gearhead）
- Frame Size: 80 mm
- Output Power: 25 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 36
- capacitor: Product Name: CH15BFAUL, Capacitance: 1.5 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: single-Phase 220/230 VAC 50/60 Hz
- Overheat Protective Device Type: Thermal protector
- Motor Section Mass: 3.1 kg (including gearhead）
SCM425ECM-50 speed-control motor with electromagnetic brake MOTOR FOR K2 UNIT(CN
SCM425ECM-60 speed-control motor with electromagnetic brake MOTOR FOR K2 UNIT(CN
- Frame Size: 80 mm
- Output Power: 25 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Electromagnetic brake Type
- Shaft/Gear Type: Parallel Shaft Combination Type
- Gear Ratio: 75
- capacitor: Product Name: CH15BFAUL, Capacitance: 1.5 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: single-Phase 220/230 VAC 50/60 Hz
- Overheat Protective Device Type: Thermal protector
- Motor Section Mass: 3.1 kg (including gearhead）
SCM425ECM-90 speed-control motor with electromagnetic brake MOTOR FOR K2 UNIT(CN
Items 9901 - 9950 of 16597