ORIENTAL MOTOR
Items 5191 - 5220 of 16597
3RK15GN-AW2J general-purpose motor WK2 series
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• Description of Specification Items
• The product name written on the motor nameplate is 3RK15GN-CW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 200 VAC capacitor included (this product)
E: single-phase 220 VAC/230 VAC capacitor included. (3RK15GN-CW2E)
- Frame Size: 70 mm
- Output Power: 15 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.21 A
single-Phase 200 VAC / 60 Hz / 0.24 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 100 mN·m
single-Phase 200 VAC / 60 Hz: 100 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 125 mN·m / 1200 r/min
single-Phase 200 VAC / 60 Hz: 105 mN·m / 1450 r/min - The Speed When Installing gearhead: Depends on the combination gearhead.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gearhead.
- Permissible Inertia J: Depends on the combination gearhead.
- capacitor: Product name: CH18BFAUL, Capacity: 1.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.1 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Frame Size: 70 mm
- Output Power: 15 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.418 A
single-Phase 100 VAC / 60 Hz / 0.456 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 95 mN·m
single-Phase 100 VAC / 60 Hz: 95 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 120 mN·m / 1210 r/min
single-Phase 100 VAC / 60 Hz: 95 mN·m / 1520 r/min - capacitor: Product name: CH70CFAUL2, Capacity: 7.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.1 kg
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Frame Size: 70 mm
- Output Power: 15 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.209 A
single-Phase 200 VAC / 60 Hz / 0.240 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 95 mN·m
single-Phase 200 VAC / 60 Hz: 95 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 120 mN·m / 1210 r/min
single-Phase 200 VAC / 60 Hz: 95 mN·m / 1520 r/min - capacitor: Product name: CH18BFAUL, Capacity: 1.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.1 kg
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Frame Size: 70 mm
- Output Power: 15 W
- Type: Lead Wire Type
- Shaft/Gear Type: Pinion Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: 30 MInutes
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.38 A
single-Phase 115 VAC / 60 Hz / 0.38 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 100 mN·m
single-Phase 115 VAC / 60 Hz: 115 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 94 mN·m / 1530 r/min
single-Phase 115 VAC / 60 Hz: 94 mN·m / 1530 r/min - capacitor: Product name: CH55FAUL2, Capacity: 5.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.1 kg
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped.
When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
High-efficiency reaction synchronous reluctance motor for constant-speed industrial applications with precise, slip-free operation.
High-efficiency reaction synchronous reluctance motor for constant-speed industrial applications with precise, slip-free operation.
High-efficiency reaction synchronous reluctance motor for constant-speed industrial applications with precise, slip-free operation.
High-efficiency reaction synchronous reluctance motor for constant-speed industrial applications with precise, slip-free operation.
K-series torque motor – variants (power, shaft type, voltage)
The K-series torque motors are suitable for applications with constant traction and simple speed control via the supply voltage.
Please select the service first; then the wave type and voltage are automatically limited to the available combinations.
Characteristics
- High start-up torque, falling torque-speed characteristic (torque ~ U2).
- Operation as a brake possible (direct current for constant tractive force).
- Integrated thermal protection (automatically resetting).
- Degree of protection IP20.
- contain capacitor (J/U/E depending on voltage); Not specified on the nameplate.
- Accessories such as capstan included; Gearbox available separately (can only be combined with pinion shaft); not included in this variant article.
Varianten & Hinweise
- Performance: 3 W, 6 W, 10 W, 20 W.
- Wellenart: Pinion shaft "GN" or round shaft "A" (round shaft can be combined without transmission).
Voltage: 100 V / 110-115 V / 200 V / 220-230 V.
- (Angular gears cannot be combined.)
(capacitor type J/U/E depending on the voltage variant); Not separately selectable.
Scope of delivery
- Motor including suitable operating capacitor and capacitor cap.
- for motor frame size: 90 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- for motor frame size: 90 mm
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Degree of protection IP20
- RoHS compliant
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 90 mm
- Rated Output Power: 120 W
- Shaft/Gear Type: Round Shaft with Shaft Flat
- Shaft Material: Stainless steel
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Motor Type: connector Type
- Rotor Inertia J: 0.23×10-4 kg·m2
- Motor Section Mass: 1.1 kg
- Frame Size: 90 mm
- Rated Output Power: 120 W
- Shaft/Gear Type: Round Shaft (with key )
- Gear Ratio: -
- Rotation Direction: Depends on the combination gear head.
- Electromagnetic Brake: Not Equipped
- Motor Type: connector Type
- Rotor Inertia J: 0.23×10-4 kg·m2
- Frame Size: 90 mm
- Rated Output Power: 100 W
- Shaft/Gear Type: Round Shaft Type
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- cable Outlet Direction: Drawing on the Counter-Output Shaft Side
- Rotor Inertia J: 0.252×10-4 kg·m2
- Motor Section Mass: 1.1 kg
- Frame Size: 90 mm
- Rated Output Power: 100 W
- Shaft/Gear Type: Round Shaft Type
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- cable Outlet Direction: Drawing on the Output Shaft Side
- Rotor Inertia J: 0.252×10-4 kg·m2
- Motor Section Mass: 1.1 kg
- Frame Size: 90 mm
- Rated Output Power: 100 W
- Electromagnetic Brake: Not Equipped
- cable Outlet Direction: Drawing on the Counter-Output Shaft Side
- Rotor Inertia J: 0.252×10-4 kg·m2
- Frame Size: 90 mm
- Rated Output Power: 100 W
- Electromagnetic Brake: Not Equipped
- cable Outlet Direction: Drawing on the Output Shaft Side
- Rotor Inertia J: 0.252×10-4 kg·m2
Items 5191 - 5220 of 16597