ORIENTAL MOTOR
Items 1 - 40 of 88
Description of Specification Items
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66MK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 6 mm
- Stroke: 150 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: ~30 kg
- Thrust: ~360 N
- Push Force: 500 N
- Holding Force: 360 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 4.7 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
EZSM6RE015AZAK AZ series (closed loop, absolute encoder) Width 74 mm × Height 66,5 mm Parallel motor right (reversed right) Slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
EZSM6RE015ARMK AR series (step motor) Width 74 mm × Height 66,5 mm Parallel motor right (reversed right) Slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66SAK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 6 mm
- Stroke: 150 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: -
- Thrust: ~360 N
- Push Force: 500 N
- Holding Force: 360 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 4.3 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
EZSM6RD015AZMK AZ series (closed loop, absolute encoder) Width 74 mm × Height 66,5 mm Parallel motor right (reversed right) Slope mm: 12 With electromagnetic brake DC supply (24/48 VDC)
EZSM6RD015AZAK AZ series (closed loop, absolute encoder) Width 74 mm × Height 66,5 mm Parallel motor right (reversed right) Slope mm: 12 single shaft / without electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66SMK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 12 mm
- Stroke: 150 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~15 kg
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 600 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.25 A min.
- Actuator part Mass: 4.6 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66SAK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 12 mm
- Stroke: 150 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 4.3 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
EZSM6LE015AZMK AZ series (closed loop, absolute encoder) width 74 mm × height 66,5 mm Parallel motor left (reversed left) slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66AK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 6 mm
- Stroke: 150 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: -
- Thrust: ~360 N
- Push Force: 500 N
- Holding Force: 360 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 4.3 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
EZSM6LE015ARMK AR series (step motor) Width 74 mm × Height 66,5 mm Parallel motor left (reversed left) Slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66SAK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 6 mm
- Stroke: 150 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: -
- Thrust: ~360 N
- Push Force: 500 N
- Holding Force: 360 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 4.3 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
EZSM6LD015AZMK AZ series (closed loop, absolute encoder) width 74 mm × height 66,5 mm Parallel motor left (reversed left) slope mm: 12 With electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66AK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 12 mm
- Stroke: 150 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Left Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 4.3 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
EZSM6LD015ARMK AR series (step motor) Width 74 mm × Height 66,5 mm Parallel motor left (reversed left) Slope mm: 12 With electromagnetic brake DC supply (24/48 VDC)
EZSM6LD015ARAK AR series (step motor) Width 74 mm × Height 66,5 mm Parallel motor left (reversed left) Slope mm: 12 single shaft / without electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66MK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 6 mm
- Stroke: 150 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: ~30 kg
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 4.7 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
EZSM6E015AZAK AZ series (closed loop, absolute encoder) width 74 mm × height 66,5 mm inline (standard) slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66SMK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 6 mm
- Stroke: 150 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: ~30 kg
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 300 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.25 A min.
- Actuator part Mass: 4.6 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66SAK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 6 mm
- Stroke: 150 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: -
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 4.3 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
EZSM6D015AZMK AZ series (closed loop, absolute encoder) width 74 mm × height 66,5 mm inline (standard) slope mm: 12 With electromagnetic brake DC supply (24/48 VDC)
EZSM6D015AZAK AZ series (closed loop, absolute encoder) width 74 mm × height 66,5 mm inline (standard) slope mm: 12 single shaft / without electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66SMK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 12 mm
- Stroke: 150 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~15 kg
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 600 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.25 A min.
- Actuator part Mass: 4.6 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM66SAK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Lead: 12 mm
- Stroke: 150 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 4.3 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66MK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Air Coupler for Suction Direction: Left direction
- Lead: 6 mm
- Stroke: 150 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~60 kg
- Transportable Mass Vertical: ~30 kg
- Thrust: ~400 N
- Push Force: 500 N
- Holding Force: 400 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 4.7 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
EZSM6CLE015AZAK AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
EZSM6CLE015ARMK AR series (step motor) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
EZSM6CLE015ARAK AR series (step motor) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM66MK
- Linear Slide Size: Width 74 mm×Height 66.5 mm
- Air Coupler for Suction Direction: Left direction
- Lead: 12 mm
- Stroke: 150 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Straight
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~15 kg
- Thrust: ~200 N
- Push Force: 400 N
- Holding Force: 200 N ※1
- Dynamic Permissible Moment: MP: 45.7 N·m, MY: 37.5 N·m, MR: 55.6 N·m
- Static Permissible Moment: MP: 290.0 N·m, MY: 187.0 N·m, MR: 340.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 4.7 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
EZSM6CLD015AZAK AZ series (Closed Loop, Absolute Encoder) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 12 single shaft / without electromagnetic brake DC supply (24/48 VDC)
EZSM6CLD015ARMK AR series (step motor) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 12 With electromagnetic brake DC supply (24/48 VDC)
EZSM6CLD015ARAK AR series (step motor) Width 74 mm × Height 66,5 mm clean room, air connection left slope mm: 12 single shaft / without electromagnetic brake DC supply (24/48 VDC)
EZSM4RE015AZMK AZ series (closed loop, absolute encoder) Width 74 mm × Height 50 mm Parallel motor right (reversed right) Slope mm: 6 With electromagnetic brake DC supply (24/48 VDC)
EZSM4RE015AZAK AZ series (closed loop, absolute encoder) Width 74 mm × Height 50 mm Parallel motor right (reversed right) Slope mm: 6 single shaft / without electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 150 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: ~12.5 kg
- Thrust: ~125 N
- Push Force: 200 N
- Holding Force: 125 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 300 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 2.6 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SAK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 6 mm
- Stroke: 150 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.006 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~30 kg
- Transportable Mass Vertical: -
- Thrust: ~125 N
- Push Force: 200 N
- Holding Force: 125 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 300 mm/s
- Actuator part Mass: 2.5 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AZ series
- Equipped Motor Product Name: AZM46MK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 150 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Minimum Step Angle (at Shipment): 0.01 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 2.6 kg
* The UL mark of the actuator is made by the motor product name, not the actuator product name.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• When performing a Push-Motion return-to-home on the rising side, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
EZSM4RD015AZAK AZ series (closed loop, absolute encoder) Width 74 mm × Height 50 mm Parallel motor right (reversed right) Slope mm: 12 single shaft / without electromagnetic brake DC supply (24/48 VDC)
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SMK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 150 mm
- Electromagnetic Brake: Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: ~7 kg
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N ※1
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Electromagnetic Brake Power Supply Input Voltage: 24 VDC ±5% ※2
- Electromagnetic Brake Power Supply Input Current: 0.08 A min.
- Actuator part Mass: 2.6 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
※1 The holding force of the electromagnetic brake is the same value as the holding force.
※2 If the wiring distance between the motor and driver is extended to 20 m or longer using an accessory cable (sold separately), the 24 VDC±4% specification applies.
For the pulse input type, a separate power supply for the electromagnetic brakes is required for the product with an electromagnetic brake.
[Note]
• For products with a 12mm lead, when performing a Push-Motion return-to-home on the rising side with a transportable mass of 4 kg or more, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
- Power Supply Input: DC Input
- Equipped Motor: αSTEP AR series
- Equipped Motor Product Name: ARM46SAK
- Linear Slide Size: Width 74 mm×Height 50 mm
- Lead: 12 mm
- Stroke: 150 mm
- Electromagnetic Brake: Not Equipped
- Motor Installation Direction: Reversed Motor Type (Right Side)
- Drive System: Ball Screw
- Repetitive Positioning Accuracy: ±0.02 mm
- Resolution: The setting can be configured arbitrarily between 100–10000 [P/R] of the motor.
- Minimum Step Angle (at Shipment): 0.012 mm
- Traveling Parallelism: 0.03 mm
- Transportable Mass Horizontal: ~15 kg
- Transportable Mass Vertical: -
- Thrust: ~70 N
- Push Force: 100 N
- Holding Force: 70 N
- Dynamic Permissible Moment: MP: 8.0 N·m, MY: 8.0 N·m, MR: 27.8 N·m
- Static Permissible Moment: MP: 51.2 N·m, MY: 42.5 N·m, MR: 176.0 N·m
- Maximum Speed: 600 mm/s
- Actuator part Mass: 2.5 kg
* This is done by motor product name, not by actuator product name.
• For the specifications and characteristics of 48 VDC input, please contact the nearest sales office.
[Note]
• For products with a 12mm lead, when performing a Push-Motion return-to-home on the rising side with a transportable mass of 4 kg or more, the home position may vary.
• Maximum speed of push-motion operation is 25 mm/s or less, and within the limit of the dynamic permissible moment.The pulse input type has a pushing operation function, but does not have a push-motion return-to-home operation.
• For DC Input, the maximum speed may be lower, depending on the ambient temperature and the length of the motor cable.
Items 1 - 40 of 88