Miscellaneous clearance stock
| Characteristics | Value |
|---|---|
| Sensor principle | Inductive |
| Structure/thread | M5 x 0,5 (threaded design), fittable flush |
| Structural length | L = 30 mm |
| Switching distance (Sn) | 0,8 mm |
| Real switching distance (Sr) | 0,8 mm ± 10 % |
| Working area | 0 … 0,65 mm |
| Output | PNP, normally open |
| Operating voltage | 10 … 36 V DC |
| Current consumption | 15 mA (for 24 V) |
| Continuous current switching output | 100 mA |
| Voltage drop switching output | max. 2,5 V |
| Switching frequency | 2000 Hz |
| Protective functions | Reversal protection, short circuit protection (pulsed), overload protection |
| Degree of protection | IP65 |
| Ambient temperature | -25... +70 °C |
| Material | stainless steel (303 / 1.4305); active area: POM |
| Connection | cable 2 m (PVC), 3 x 0,14 mm2; BN=L+, BU=L-, BK=OUT |
| Display | 1x LED yellow (switching state) |
| Scope of delivery | 2x lock nut |
| Weight | 42,9 g |
| Tightening torque | 2 Nm |
· Suitable for horizontal and vertical installation
· Up to 150 kg load-bearing aluminium frame
· Adjustable in 5° steps • Holds wind strengths up to 32 m/sec. standing • Suitable for boats, motorhomes, roofs and so on.
· 2 adjustable aluminum solar panel holders with 14,5" / 37 cm • Angle of attachment variable adjustable: in 5°-Schritten
· Measurements: per 370 x 50 x 25 mm, weight: per 850 g
· Suitable for horizontal and vertical installation
· Load capacity: Per 150 kg
· Holds wind strengths up to 32 m/sec. standing • Material frames: Aluminium, screws: Stainless steel
· 2 mounting sets consisting of 4 aluminum profile perforated plates, 2 locking plates, 6 M8-Schrauben, 6 wing nuts, 4 M6-Schrauben, 6 self-tapping screws ST and German instructions. Solar Panel Brick Roof Mountings - Also relevant or appropriate to: Solar module, PV • For individual orders, we send the item directly in the shipping-safe & shipping-optimized original product box. This saves packaging waste and protects the environment.
