MP-DC motors
Protection class IP40 - Voltages between 12V and 170 Volt are available. Speed 3000 min-1
These permanent magnet DC motors are manufactured in four outer diameter sizes - ø48, ø65, ø80 and ø110 mm - with different lengths, covering power ranges up to 500 watts. Each of these sizes can be customised in terms of power supply, speed, connection configuration, options and more. A standard self-ventilation system can be supplied on request to achieve a power increase of approx. 30 %. Additional options are available for power ranges above 500 watts to allow an even higher level of customisation: The technical department is ready to solve any project at no additional cost in order to obtain the most suitable product for the customer's requirements.
MP42.66 — Permanent magnet DC motor
Series overview. The operating points and mechanics of the selected article variant apply.
| Parameter | Value | Unit |
|---|---|---|
| Operating data · Operating point 1 (12 V DC) | ||
| Rated voltage | 12 | V DC |
| Output power | 60 | W |
| Speed | 1,500 | min⁻¹ |
| Rated current | 7.6 | A |
| Rated torque | On request | Nm |
| Maximum torque | On request | Nm |
| Duty type | S1 | |
| Maximum current | 30 | A |
| Armature resistance | On request | Ω |
| Armature inductance | On request | mH |
| Operating data · Operating point 2 (12 V DC) | ||
| Rated voltage | 12 | V DC |
| Output power | 60 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 7.6 | A |
| Rated torque | 0.2 | Nm |
| Maximum torque | 0.8 | Nm |
| Duty type | S1 | |
| Maximum current | 30 | A |
| Armature resistance | 0.45 | Ω |
| Armature inductance | 1 | mH |
| Operating data · Operating point 3 (24 V DC) | ||
| Rated voltage | 24 | V DC |
| Output power | 60 | W |
| Speed | 1,500 | min⁻¹ |
| Rated current | 3.8 | A |
| Rated torque | On request | Nm |
| Maximum torque | On request | Nm |
| Duty type | S1 | |
| Maximum current | 15 | A |
| Armature resistance | On request | Ω |
| Armature inductance | On request | mH |
| Operating data · Operating point 4 (24 V DC) | ||
| Rated voltage | 24 | V DC |
| Output power | 60 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 3.8 | A |
| Rated torque | 0.2 | Nm |
| Maximum torque | 0.8 | Nm |
| Duty type | S1 | |
| Maximum current | 15 | A |
| Armature resistance | 1 | Ω |
| Armature inductance | 2.5 | mH |
| Operating data · Operating point 5 (48 V DC) | ||
| Rated voltage | 48 | V DC |
| Output power | 60 | W |
| Speed | 1,500 | min⁻¹ |
| Rated current | 1.9 | A |
| Rated torque | On request | Nm |
| Maximum torque | On request | Nm |
| Duty type | S1 | |
| Maximum current | 7.5 | A |
| Armature resistance | On request | Ω |
| Armature inductance | On request | mH |
| Operating data · Operating point 6 (48 V DC) | ||
| Rated voltage | 48 | V DC |
| Output power | 60 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 1.9 | A |
| Rated torque | 0.2 | Nm |
| Maximum torque | 0.8 | Nm |
| Duty type | S1 | |
| Maximum current | 7.5 | A |
| Armature resistance | 3 | Ω |
| Armature inductance | 10 | mH |
| Operating data · Operating point 7 (170 V DC) | ||
| Rated voltage | 170 | V DC |
| Output power | 60 | W |
| Speed | 1,500 | min⁻¹ |
| Rated current | 0.6 | A |
| Rated torque | On request | Nm |
| Maximum torque | On request | Nm |
| Duty type | S1 | |
| Maximum current | 2.4 | A |
| Armature resistance | On request | Ω |
| Armature inductance | On request | mH |
| Operating data · Operating point 8 (170 V DC) | ||
| Rated voltage | 170 | V DC |
| Output power | 60 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 0.6 | A |
| Rated torque | 0.2 | Nm |
| Maximum torque | 0.8 | Nm |
| Duty type | S1 | |
| Maximum current | 2.4 | A |
| Armature resistance | 25 | Ω |
| Armature inductance | 60 | mH |
| Design and mechanics | ||
| Housing diameter | 65 | mm |
| Mounting | Depending on version | |
| Base motor rotor inertia | 0.00007 | kg·m² |
| Equipment | ||
| Motor design | Permanent magnet DC motor | |
| Degree of protection | IP40 | |
| Insulation class | F | |
| Cooling | Without fan | |
| Connection | Lead wires | |
| Bearings | Ball bearings | |
Series illustration; see data for configuration.
Unspecified values or values awaiting confirmation: on request. S6 duty and permissible overload: on request. Maximum current is not a permissible continuous current.
MP42.22 — Permanent magnet DC motor
| Parameter | Value | Unit |
|---|---|---|
| Operating data · Operating point 1 (12 V DC) | ||
| Rated voltage | 12 | V DC |
| Output power | 22 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 2.7 | A |
| Rated torque | 0.07 | Nm |
| Maximum torque | 0.3 | Nm |
| Duty type | S1 | |
| Maximum current | 11 | A |
| Armature resistance | 0.9 | Ω |
| Armature inductance | 2 | mH |
| Operating data · Operating point 2 (24 V DC) | ||
| Rated voltage | 24 | V DC |
| Output power | 22 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 1.4 | A |
| Rated torque | 0.07 | Nm |
| Maximum torque | 0.3 | Nm |
| Duty type | S1 | |
| Maximum current | 5.5 | A |
| Armature resistance | 3 | Ω |
| Armature inductance | 6 | mH |
| Operating data · Operating point 3 (48 V DC) | ||
| Rated voltage | 48 | V DC |
| Output power | 22 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 0.7 | A |
| Rated torque | 0.07 | Nm |
| Maximum torque | 0.3 | Nm |
| Duty type | S1 | |
| Maximum current | 2.7 | A |
| Armature resistance | 11 | Ω |
| Armature inductance | 25 | mH |
| Operating data · Operating point 4 (170 V DC) | ||
| Rated voltage | 170 | V DC |
| Output power | On request | W |
| Speed | On request | min⁻¹ |
| Rated current | 0.2 | A |
| Rated torque | On request | Nm |
| Maximum torque | On request | Nm |
| Duty type | S1 | |
| Maximum current | 0.76 | A |
| Armature resistance | On request | Ω |
| Armature inductance | On request | mH |
| Design and mechanics | ||
| Housing diameter | 65 | mm |
| Article weight | 0.85 | kg |
| Mounting | Mini flange | |
| Bolt circle | 33 | mm |
| Pilot diameter | On request | mm |
| Shaft Ø × length | 6 × 20 | mm |
| Base motor rotor inertia | 0.00003 | kg·m² |
| Equipment | ||
| Motor design | Permanent magnet DC motor | |
| Degree of protection | IP40 | |
| Insulation class | F | |
| Cooling | Without fan | |
| Connection | Lead wires | |
| Bearings | Ball bearings | |
Series illustration; see data for configuration.
Unspecified values or values awaiting confirmation: on request. S6 duty and permissible overload: on request. Maximum current is not a permissible continuous current.
MP42.33 — Permanent magnet DC motor
Series overview. The operating points and mechanics of the selected article variant apply.
| Parameter | Value | Unit |
|---|---|---|
| Operating data · Operating point 1 (12 V DC) | ||
| Rated voltage | 12 | V DC |
| Output power | 30 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 3.7 | A |
| Rated torque | 0.1 | Nm |
| Maximum torque | 0.4 | Nm |
| Duty type | S1 | |
| Maximum current | 15 | A |
| Armature resistance | 0.5 | Ω |
| Armature inductance | 1.5 | mH |
| Operating data · Operating point 2 (24 V DC) | ||
| Rated voltage | 24 | V DC |
| Output power | 15 | W |
| Speed | 1,500 | min⁻¹ |
| Rated current | 0.9 | A |
| Rated torque | On request | Nm |
| Maximum torque | On request | Nm |
| Duty type | S1 | |
| Maximum current | 3.8 | A |
| Armature resistance | On request | Ω |
| Armature inductance | On request | mH |
| Operating data · Operating point 3 (24 V DC) | ||
| Rated voltage | 24 | V DC |
| Output power | 30 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 1.9 | A |
| Rated torque | 0.1 | Nm |
| Maximum torque | 0.4 | Nm |
| Duty type | S1 | |
| Maximum current | 7.6 | A |
| Armature resistance | 2 | Ω |
| Armature inductance | 4 | mH |
| Operating data · Operating point 4 (48 V DC) | ||
| Rated voltage | 48 | V DC |
| Output power | 30 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 0.9 | A |
| Rated torque | 0.1 | Nm |
| Maximum torque | 0.4 | Nm |
| Duty type | S1 | |
| Maximum current | 3.8 | A |
| Armature resistance | 6.7 | Ω |
| Armature inductance | 15 | mH |
| Operating data · Operating point 5 (170 V DC) | ||
| Rated voltage | 170 | V DC |
| Output power | 30 | W |
| Speed | 3,000 | min⁻¹ |
| Rated current | 0.3 | A |
| Rated torque | 0.1 | Nm |
| Maximum torque | 0.4 | Nm |
| Duty type | S1 | |
| Maximum current | 1.2 | A |
| Armature resistance | 66 | Ω |
| Armature inductance | 130 | mH |
| Design and mechanics | ||
| Housing diameter | 65 | mm |
| Mounting | Depending on version | |
| Base motor rotor inertia | 0.00004 | kg·m² |
| Equipment | ||
| Motor design | Permanent magnet DC motor | |
| Degree of protection | IP40 | |
| Insulation class | F | |
| Cooling | Without fan | |
| Connection | Lead wires | |
| Bearings | Ball bearings | |
Series illustration; see data for configuration.
Unspecified values or values awaiting confirmation: on request. S6 duty and permissible overload: on request. Maximum current is not a permissible continuous current.