Induction motors
Items 1 - 29 of 29
0IK3A-BW2J general-purpose motor WK2 series
• Description of Specification Items
• The product name written on the motor nameplate is 0IK3A-BW3. The suffix (U) in the product name above indicates the type of capacitor.
- Frame Size: 42 mm
- Output Power: 3 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.115 A
single-Phase 115 VAC / 60 Hz / 0.118 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 6 mN·m
single-Phase 115 VAC / 60 Hz: 6 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 10 mN·m / 3000 r/min
single-Phase 115 VAC / 60 Hz: 10 mN·m / 3000 r/min - capacitor: Product name: CH15FAUL, Capacity: 1.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
• The product name written on the motor nameplate is 0IK3A-DW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 42 mm
- Output Power: 200 VAC / 50 Hz: 2.5 W
200 VAC / 60 Hz: 3 W - series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.057 A
single-Phase 200 VAC / 60 Hz / 0.064 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 5 mN·m
single-Phase 200 VAC / 60 Hz: 5 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 9.5 mN·m / 2500 r/min
single-Phase 200 VAC / 60 Hz: 9.5 mN·m / 3100 r/min - capacitor: Product name: CH045BFAUL, Capacity: 0.45 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The product name written on the motor nameplate is 0IK3GN-BW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 42 mm
- Output Power: 3 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.109 A
single-Phase 100 VAC / 60 Hz / 0.123 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 6 mN·m
single-Phase 100 VAC / 60 Hz: 6 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 12 mN·m / 2400 r/min
single-Phase 100 VAC / 60 Hz: 10 mN·m / 3000 r/min - The Speed When Installing gearhead: Depends on the combination gearhead.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gearhead.
- Permissible Inertia J: Depends on the combination gearhead.
- capacitor: Product name: CH18FAUL, Capacity: 1.8 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
0IK3GN-BW3U general-purpose motor WK2 series
- Frame Size: 42 mm
- Output Power: 200 VAC / 50 Hz: 2.5 W
200 VAC / 60 Hz: 3 W - series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gear head.
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.057 A
single-Phase 200 VAC / 60 Hz / 0.064 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 5 mN·m
single-Phase 200 VAC / 60 Hz: 5 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 9.5 mN·m / 2500 r/min
single-Phase 200 VAC / 60 Hz: 9.5 mN·m / 3100 r/min - The Speed When Installing gearhead:
This depends on the gearhead used.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gear head.
- Permissible Inertia J: Depends on the combination gear head.
- capacitor: Product name: CH045BFAUL, Capacity: 0.45 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Item: Specifications
- Insulation Resistance: After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
- Dielectric Strength: After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
- Temperature Rise: A gearhead or equivalent heat sink* connected to the motor and the winding temperature rise is measured at 75 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity.
- Thermal Class: UL/CSA Standards: 105 (A), EN Standards: 120 (E)
- Overheat Protective Device: Impedance Protected
- Operating Ambient Temperature: -10~+40 °C (Non-freezing)
- Operating Ambient Humidity: 85 % max. (Non-condensing)
- Degree of Protection: IP20
4IK40A-BW2J general-purpose motor WK2 series
- Output power: 40 W
- Speed 50 Hz: 3000 min-1, 60 Hz: 3600
- Engine frame size: 80 mm
- Degree of protection IP20
- RoHS compliant
- incl. a protective cap codenser for AC motors
- incl. fixing screws, washers and nuts
- Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• The product name written on the motor nameplate is 4IK40A-DW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 80 mm
- Output Power: 40 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.39 A
single-Phase 200 VAC / 60 Hz / 0.37 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 90 mN·m
single-Phase 200 VAC / 60 Hz: 90 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 160 mN·m / 2400 r/min
single-Phase 200 VAC / 60 Hz: 135 mN·m / 2900 r/min - capacitor: Product name: CH23BFAUL, Capacity: 2.3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.5 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Output power: 40 W
- Speed 50 Hz: 3000 min-1, 60 Hz: 3600
- Engine frame size: 80 mm
- Degree of protection IP20
- RoHS compliant
- incl. a protective cap codenser for AC motors
- incl. fixing screws, washers and nuts
- Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• The product name written on the motor nameplate is 4IK60A-BW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 100 VAC capacitor included (this product)
U: single-phase 110 VAC/115 VAC capacitor included. (4IK60A-BW2U)
- Frame Size: 80 mm
- Output Power: 60 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 1.09 A
single-Phase 100 VAC / 60 Hz / 1.25 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 160 mN·m
single-Phase 100 VAC / 60 Hz: 160 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 230 mN·m / 2500 r/min
single-Phase 100 VAC / 60 Hz: 190 mN·m / 3000 r/min - capacitor: Product name: CH140CFAUL2, Capacity: 14 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.8 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Output power: 60 W
- Speed 50 Hz: 3000 min-1, 60 Hz: 3600
- Engine frame size: 80 mm
- Degree of protection IP20
- RoHS compliant
- incl. a protective cap codenser for AC motors
- incl. fixing screws, washers and nuts
- Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• The product name written on the motor nameplate is 4IK60A-DW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 80 mm
- Output Power: 60 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.54 A
single-Phase 200 VAC / 60 Hz / 0.57 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 160 mN·m
single-Phase 200 VAC / 60 Hz: 160 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 230 mN·m / 2500 r/min
single-Phase 200 VAC / 60 Hz: 190 mN·m / 3000 r/min - capacitor: Product name: CH30BFAUL, Capacity: 3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.8 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Output power: 60 W
- Speed 50 Hz: 3000 min-1, 60 Hz: 3600
- Engine frame size: 80 mm
- Degree of protection IP20
- RoHS compliant
- incl. a protective cap codenser for AC motors
- incl. fixing screws, washers and nuts
- Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• The product name written on the motor nameplate is 5IK150A-BW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 100 VAC capacitor included (this product)
U: single-phase 110 VAC/115 VAC capacitor included. (5IK150A-BW2U)
- Frame Size: 90 mm
- Output Power: 150 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 2.39 A
single-Phase 100 VAC / 60 Hz / 2.49 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 380 mN·m
single-Phase 100 VAC / 60 Hz: 380 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 560 mN·m / 2650 r/min
single-Phase 100 VAC / 60 Hz: 460 mN·m / 3200 r/min - capacitor: Product name: CH400CFAUL2, Capacity: 40 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 3.2 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Output power: 150 W
- Speed 50 Hz: 3000 min-1, 60 Hz: 3600
- Engine frame size: 90 mm
- Degree of protection IP20
- RoHS compliant
- incl. a protective cap codenser for AC motors
- incl. fixing screws, washers and nuts
- Depending on the load, the actual speed 2-20 % is lower than the value listed here.
5IK150A-DW2J general-purpose motor WK2 series
- Output power: 150 W
- Speed 50 Hz: 3000 min-1, 60 Hz: 3600
- Engine frame size: 90 mm
- Degree of protection IP20
- RoHS compliant
- incl. a protective cap codenser for AC motors
- incl. fixing screws, washers and nuts
- Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 90 mm
- Output Power: 150 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 1.11 A
Three-Phase 200 VAC / 60 Hz / 0.93 A
Three-Phase 220 VAC / 60 Hz / 0.97 A
Three-Phase 230 VAC / 60 Hz / 1.01 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 680 mN·m
Three-Phase 200 VAC / 60 Hz: 570 mN·m
Three-Phase 220 VAC / 60 Hz: 570 mN·m
Three-Phase 230 VAC / 60 Hz: 570 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 550 mN·m / 2650 r/min
Three-Phase 200 VAC / 60 Hz: 460 mN·m / 3100 r/min
Three-Phase 220 VAC / 60 Hz: 460 mN·m / 3150 r/min
Three-Phase 230 VAC / 60 Hz: 460 mN·m / 3200 r/min - capacitor: -
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Output power: 150 W
- Speed 50 Hz: 3000 min-1, 60 Hz: 3600
- Engine frame size: 90 mm
- Degree of protection IP20
- RoHS compliant
- incl. a protective cap codenser for AC motors
- incl. fixing screws, washers and nuts
- Depending on the load, the actual speed 2-20 % is lower than the value listed here.
5IK60A-BW2J general-purpose motor WK2 series
• The product name written on the motor nameplate is 5IK60A-BW2. The suffix of the product name above indicates the type of capacitor.
U: single-phase 110 VAC/115 VAC capacitor included (this product)
J: single-phase 100 VAC capacitor included. (5IK60A-BW2J)
- Frame Size: 90 mm
- Output Power: 60 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.94 A
single-Phase 115 VAC / 60 Hz / 0.93 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 140 mN·m
single-Phase 115 VAC / 60 Hz: 140 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 185 mN·m / 3200 r/min
single-Phase 115 VAC / 60 Hz: 185 mN·m / 3200 r/min - capacitor: Product name: CH140CFAUL2, Capacity: 14 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 2.5 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
• The product name written on the motor nameplate is 5IK60A-DW2. The suffix (J) in the product name above indicates the type of capacitor.
- Frame Size: 90 mm
- Output Power: 60 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.51 A
single-Phase 200 VAC / 60 Hz / 0.52 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 140 mN·m
single-Phase 200 VAC / 60 Hz: 140 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 220 mN·m / 2650 r/min
single-Phase 200 VAC / 60 Hz: 185 mN·m / 3200 r/min - capacitor: Product name: CH40BFAUL, Capacity: 4 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 2.5 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
5IK60A-DW3E general-purpose motor WK2 series
• The product name written on the motor nameplate is 5IK90A-BW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 100 VAC capacitor included (this product)
U: single-phase 110 VAC/115 VAC capacitor included. (5IK90A-BW2U)
- Frame Size: 90 mm
- Output Power: 90 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 1.57 A
single-Phase 100 VAC / 60 Hz / 1.85 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 240 mN·m
single-Phase 100 VAC / 60 Hz: 240 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 330 mN·m / 2650 r/min
single-Phase 100 VAC / 60 Hz: 280 mN·m / 3200 r/min - capacitor: Product name: CH280CFAUL2, Capacity: 28 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 2.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Output power: 90 W
- Speed 50 Hz: 3000 min-1, 60 Hz: 3600
- Engine frame size: 90 mm
- Degree of protection IP20
- RoHS compliant
- incl. a protective cap codenser for AC motors
- incl. fixing screws, washers and nuts
- Depending on the load, the actual speed 2-20 % is lower than the value listed here.
5IK90A-DW2J general-purpose motor WK2 series
- Output power: 90 W
- Speed 50 Hz: 3000 min-1, 60 Hz: 3600
- Engine frame size: 90 mm
- Degree of protection IP20
- RoHS compliant
- incl. a protective cap codenser for AC motors
- incl. fixing screws, washers and nuts
- Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 90 W
- Speed 50 Hz: 3000 min-1, 60 Hz: 3600
- Engine frame size: 90 mm
- Degree of protection IP20
- RoHS compliant
- incl. a protective cap codenser for AC motors
- incl. fixing screws, washers and nuts
- Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Items 1 - 29 of 29