1AC single-phase motors
Items 1 - 5 of 5
IP55; 0,18 kW; S1; 2760 1/min; 230 V, 50 Hz ±60%; 1,47 A
End of shaft according to DIN/IEC Ø11 x 23 mm Heat class 155(F)
with operating capacitor nominal power at max 40° C and up to 1000 m above NN
dynamically balanced with half paste spring inserted; Vibration level "N"
incl. EG installation declaration with disassembly, operation & maintenance instructions
End of shaft according to DIN/IEC Ø11 x 23 mm Heat class 155(F)
with operating capacitor nominal power at max 40° C and up to 1000 m above NN
dynamically balanced with half paste spring inserted; Vibration level "N"
incl. EG installation declaration with disassembly, operation & maintenance instructions
IP55; 0,12 kW; S1; 1350 1/min; 230 V, 50 Hz ±5%; 0,97 A
Eff. 60%; Ms/Mn 0,68 Mmax/Mn 1,7; Is/In 3,2
End of shaft according to DIN/IEC Ø11 x 23 mm Heat class 155(F)
Rolling bearing 2x 6201/ZZ.C3
with operating capacitor nominal power at max 40° C and up to 1000 m above NN
dynamically balanced with half paste spring inserted; Vibration level "N"
incl. EG installation declaration with disassembly, operation & maintenance instructions
Eff. 60%; Ms/Mn 0,68 Mmax/Mn 1,7; Is/In 3,2
End of shaft according to DIN/IEC Ø11 x 23 mm Heat class 155(F)
Rolling bearing 2x 6201/ZZ.C3
with operating capacitor nominal power at max 40° C and up to 1000 m above NN
dynamically balanced with half paste spring inserted; Vibration level "N"
incl. EG installation declaration with disassembly, operation & maintenance instructions
IP55; 0,25 kW; S1; 2800/min; 230 V, 50 Hz ±5%; 1,91 A
End of shaft according to DIN/IEC Ø11 x 23 mm Heat class 155(F)
with operating capacitor nominal power at max 40° C and up to 1000 m above NN
dynamically balanced with half paste spring inserted; Vibration level "N"
incl. EG installation declaration with disassembly, operation & maintenance instructions
End of shaft according to DIN/IEC Ø11 x 23 mm Heat class 155(F)
with operating capacitor nominal power at max 40° C and up to 1000 m above NN
dynamically balanced with half paste spring inserted; Vibration level "N"
incl. EG installation declaration with disassembly, operation & maintenance instructions
IP55; 0,18 kW; S1; 1340 1/min; 230 V, 50 Hz ±5%; 1,52 A
Eff. 60%; Ms/Mn 0,68 Mmax/Mn 1,7; Is/In 3,2
End of shaft according to DIN/IEC Ø11 x 23 mm Heat class 155(F)
with operating capacitor nominal power at max 40° C and up to 1000 m above NN
dynamically balanced with half paste spring inserted; Vibration level "N"
incl. EG installation declaration with disassembly, operation & maintenance instructions
Eff. 60%; Ms/Mn 0,68 Mmax/Mn 1,7; Is/In 3,2
End of shaft according to DIN/IEC Ø11 x 23 mm Heat class 155(F)
with operating capacitor nominal power at max 40° C and up to 1000 m above NN
dynamically balanced with half paste spring inserted; Vibration level "N"
incl. EG installation declaration with disassembly, operation & maintenance instructions
- IP55
- 0,12 kW
- S1
- 930 1/min
- 230 V, 50 Hz ±5%
- 0,9 A
- End of shaft according to DIN/IEC Ø11 x 23 mm Heat class 155(F)
- Temperature protection: incl. 1 x PTC- PTC resistor
- terminal box layer at top
- housing of die cast aluminium
- Motor feet can be screwed on or unscrewed
- AC motors are suitable for both directions of rotation
- with operating capacitor nominal power at max 40° C and up to 1000 m above NN
- dynamically balanced with half paste spring inserted
- Vibration level "N"
- incl. EG installation declaration with disassembly, operation & maintenance instructions
- Due to the start-up and operating capacitor, the 230V motor has a stronger start-up torque.
- The start-up capacitor is switched off by a centrifugal force switch when the speed is reached.
- At low load, the temperature in the engine increases sharply and this can lead to failures.
- Therefore, it is recommended that single-phase motors should not be operated at a load below 25 % of the rated load.
Items 1 - 5 of 5