Reversible induction motors
Items 1 - 30 of 161
2RK6A-AW2MBJ motor with electromagnetic brake WK2 series
• Description of Specification Items
• The product name written on the motor nameplate is 2RK6A-AW2MB. The suffix of the product name above indicates the type of capacitor.
U: single-phase 110 VAC/115 VAC capacitor included (this product)
J: single-phase 100 VAC capacitor included. (2RK6A-AW2MBJ)
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.235 A
single-Phase 115 VAC / 60 Hz / 0.242 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 45 mN·m
single-Phase 115 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 41 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 41 mN·m / 1450 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 110 VAC / 60 Hz / 0.03 A / 3 W
single-Phase 115 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- capacitor: Product name: CH35FAUL2, Capacity: 3.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (U) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor.
2RK6A-AW2MJ motor with electromagnetic brake WK2 series
2RK6A-CW2MBE motor with electromagnetic brake WK2 series
• The product name written on the motor nameplate is 2RK6A-CW2MB. The suffix of the product name above indicates the type of capacitor.
J: single-phase 200 VAC capacitor included (this product)
E: single-phase 220 VAC/230 VAC capacitor included. (2RK6A-CW2MBE)
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.113 A
single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 50 mN·m
single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor.
• The product name written on the motor nameplate is 2RK6A-CW2M. The suffix of the product name above indicates the type of capacitor.
J: single-phase 200 VAC capacitor included (this product)
E: single-phase 220 VAC/230 VAC capacitor included. (2RK6A-CW2ME)
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.113 A
single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 50 mN·m
single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.9 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor.
2RK6A-JAM motor with electromagnetic brake K2 series
2RK6A-JCM motor with electromagnetic brake K2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 100
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.244 A
single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m
single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 15 r/min
single-Phase 100 VAC / 60 Hz: 18 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 3 N·m
single-Phase 100 VAC / 60 Hz: 2.7 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10-4 kg·m2
- capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 12.5
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.244 A
single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m
single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 120 r/min
single-Phase 100 VAC / 60 Hz: 144 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 0.5 N·m
single-Phase 100 VAC / 60 Hz: 0.42 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 9.6×10-4 kg·m2
- capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2RK6AMB-120S motor with electromagnetic brake WK2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 150
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.244 A
single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m
single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 10 r/min
single-Phase 100 VAC / 60 Hz: 12 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 3 N·m
single-Phase 100 VAC / 60 Hz: 3 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10-4 kg·m2
- capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 15
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.244 A
single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m
single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 100 r/min
single-Phase 100 VAC / 60 Hz: 120 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 0.6 N·m
single-Phase 100 VAC / 60 Hz: 0.5 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 13.9×10-4 kg·m2
- capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 180
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.244 A
single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m
single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 8.3 r/min
single-Phase 100 VAC / 60 Hz: 10 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 3 N·m
single-Phase 100 VAC / 60 Hz: 3 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10-4 kg·m2
- capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 18
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.244 A
single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m
single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 83 r/min
single-Phase 100 VAC / 60 Hz: 100 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 0.71 N·m
single-Phase 100 VAC / 60 Hz: 0.6 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 20×10-4 kg·m2
- capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2RK6AMB-25S motor with electromagnetic brake WK2 series
2RK6AMB-3.6S motor with electromagnetic brake WK2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 30
- Time Rating: 30 MInutes
- Rotation Direction: opposite direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.244 A
single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m
single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 50 r/min
single-Phase 100 VAC / 60 Hz: 60 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 1.1 N·m
single-Phase 100 VAC / 60 Hz: 0.9 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 55×10-4 kg·m2
- capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2RK6AMB-36S motor with electromagnetic brake WK2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 3
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.244 A
single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m
single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 500 r/min
single-Phase 100 VAC / 60 Hz: 600 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 0.12 N·m
single-Phase 100 VAC / 60 Hz: 0.1 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 0.55×10-4 kg·m2
- capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2RK6AMB-50S motor with electromagnetic brake WK2 series
2RK6AMB-5S motor with electromagnetic brake WK2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 60
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.244 A
single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m
single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 25 r/min
single-Phase 100 VAC / 60 Hz: 30 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 1.9 N·m
single-Phase 100 VAC / 60 Hz: 1.6 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10-4 kg·m2
- capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2RK6AMB-6S motor with electromagnetic brake WK2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 7.5
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.244 A
single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m
single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 200 r/min
single-Phase 100 VAC / 60 Hz: 240 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 0.3 N·m
single-Phase 100 VAC / 60 Hz: 0.25 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 3.4×10-4 kg·m2
- capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 75
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.244 A
single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m
single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 20 r/min
single-Phase 100 VAC / 60 Hz: 24 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 2.4 N·m
single-Phase 100 VAC / 60 Hz: 2 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10-4 kg·m2
- capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2RK6AMB-90S motor with electromagnetic brake WK2 series
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 9
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.244 A
single-Phase 100 VAC / 60 Hz / 0.295 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 50 mN·m
single-Phase 100 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing gearhead: single-Phase 100 VAC / 50 Hz: 167 r/min
single-Phase 100 VAC / 60 Hz: 200 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 100 VAC / 50 Hz: 0.36 N·m
single-Phase 100 VAC / 60 Hz: 0.3 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 100 VAC / 50 Hz / 0.03 A / 3 W
single-Phase 100 VAC / 60 Hz / 0.03 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 5×10-4 kg·m2
- capacitor: Product name: CH45FAUL2, Capacity: 4.5 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 100
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.113 A
single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 50 mN·m
single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing gearhead: single-Phase 200 VAC / 50 Hz: 15 r/min
single-Phase 200 VAC / 60 Hz: 18 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 200 VAC / 50 Hz: 3 N·m
single-Phase 200 VAC / 60 Hz: 2.7 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10-4 kg·m2
- capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 12.5
- Time Rating: 30 MInutes
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.113 A
single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 50 mN·m
single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - The Speed When Installing gearhead: single-Phase 200 VAC / 50 Hz: 120 r/min
single-Phase 200 VAC / 60 Hz: 144 r/min - Permissible Torque of gearhead Output Shaft: single-Phase 200 VAC / 50 Hz: 0.5 N·m
single-Phase 200 VAC / 60 Hz: 0.42 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 9.6×10-4 kg·m2
- capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
Items 1 - 30 of 161