ORIENTAL MOTOR
Items 781 - 800 of 16613
• Description of Specification Items
• The product name written on the motor nameplate is 4IK25A-AW2T. The suffix of the product name above indicates the type of capacitor.
J: single-phase 100 VAC capacitor included (this product)
U: single-phase 110 VAC/115 VAC capacitor included. (4IK25A-AW2TU)
- Frame Size: 80 mm
- Output Power: 25 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.51 A
single-Phase 100 VAC / 60 Hz / 0.52 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 130 mN·m
single-Phase 100 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 205 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 170 mN·m / 1450 r/min - capacitor: Product name: CH80CFAUL2, Capacity: 8 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• The product name written on the motor nameplate is 4IK25A-CW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 200 VAC capacitor included (this product)
E: single-phase 220 VAC/230 VAC capacitor included. (4IK25A-CW2E)
- Frame Size: 80 mm
- Output Power: 25 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.26 A
single-Phase 200 VAC / 60 Hz / 0.26 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 120 mN·m
single-Phase 200 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 205 mN·m / 1200 r/min
single-Phase 200 VAC / 60 Hz: 170 mN·m / 1450 r/min - capacitor: Product name: CH20BFAUL, Capacity: 2 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.5 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
4IK25A-CW2TJ general-purpose motor WK2 series
- Frame Size: 80 mm
- Output Power: 25 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 220 VAC / 50 Hz / 0.27 A
single-Phase 220 VAC / 60 Hz / 0.23 A
single-Phase 230 VAC / 50 Hz / 0.27 A
single-Phase 230 VAC / 60 Hz / 0.23 A - Starting Torque (Motor Shaft): single-Phase 220 VAC / 50 Hz: 110 mN·m
single-Phase 220 VAC / 60 Hz: 110 mN·m
single-Phase 230 VAC / 50 Hz: 120 mN·m
single-Phase 230 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 220 VAC / 50 Hz: 205 mN·m / 1200 r/min
single-Phase 220 VAC / 60 Hz: 170 mN·m / 1450 r/min
single-Phase 230 VAC / 50 Hz: 205 mN·m / 1200 r/min
single-Phase 230 VAC / 60 Hz: 170 mN·m / 1450 r/min - capacitor: Product name: CH15BFAUL, Capacity: 1.5 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.5 kg
- Frame Size: 80 mm
- Output Power: 25 W
- Type: With Terminal Box
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 220 VAC / 50 Hz / 0.27 A
single-Phase 220 VAC / 60 Hz / 0.23 A
single-Phase 230 VAC / 50 Hz / 0.27 A
single-Phase 230 VAC / 60 Hz / 0.23 A - Starting Torque (Motor Shaft): single-Phase 220 VAC / 50 Hz: 110 mN·m
single-Phase 220 VAC / 60 Hz: 110 mN·m
single-Phase 230 VAC / 50 Hz: 120 mN·m
single-Phase 230 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 220 VAC / 50 Hz: 205 mN·m / 1200 r/min
single-Phase 220 VAC / 60 Hz: 170 mN·m / 1450 r/min
single-Phase 230 VAC / 50 Hz: 205 mN·m / 1200 r/min
single-Phase 230 VAC / 60 Hz: 170 mN·m / 1450 r/min - capacitor: Product name: CH15BFAUL, Capacity: 1.5 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.8 kg
- Frame Size: 80 mm
- Output Power: 25 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.48 A
single-Phase 100 VAC / 60 Hz / 0.46 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 110 mN·m
single-Phase 100 VAC / 60 Hz: 110 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 190 mN·m / 1250 r/min
single-Phase 100 VAC / 60 Hz: 160 mN·m / 1550 r/min - capacitor: Product name: CH70CFAUL2, Capacity: 7.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 1.5 kg
- Frame Size: 80 mm
- Output Power: 25 W
- Type: With Terminal Box
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.48 A
single-Phase 100 VAC / 60 Hz / 0.46 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 110 mN·m
single-Phase 100 VAC / 60 Hz: 110 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 190 mN·m / 1250 r/min
single-Phase 100 VAC / 60 Hz: 160 mN·m / 1550 r/min - capacitor: Product name: CH70CFAUL2, Capacity: 7.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 1.8 kg
- Frame Size: 80 mm
- Output Power: 25 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.25 A
single-Phase 200 VAC / 60 Hz / 0.23 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 100 mN·m
single-Phase 200 VAC / 60 Hz: 100 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 190 mN·m / 1250 r/min
single-Phase 200 VAC / 60 Hz: 160 mN·m / 1500 r/min - capacitor: Product name: CH18BFAUL, Capacity: 1.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 1.5 kg
- Frame Size: 80 mm
- Output Power: 25 W
- Type: With Terminal Box
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.25 A
single-Phase 200 VAC / 60 Hz / 0.23 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 100 mN·m
single-Phase 200 VAC / 60 Hz: 100 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 190 mN·m / 1250 r/min
single-Phase 200 VAC / 60 Hz: 160 mN·m / 1500 r/min - capacitor: Product name: CH18BFAUL, Capacity: 1.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 1.8 kg
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 80 mm
- Output Power: 25 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.23 A
Three-Phase 200 VAC / 60 Hz / 0.21 A
Three-Phase 220 VAC / 60 Hz / 0.2 A
Three-Phase 230 VAC VAC / 60 Hz / 0.21 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 240 mN·m
Three-Phase 200 VAC / 60 Hz: 160 mN·m
Three-Phase 220 VAC / 60 Hz: 160 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 160 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 190 mN·m / 1300 r/min
Three-Phase 200 VAC / 60 Hz: 160 mN·m / 1550 r/min
Three-Phase 220 VAC / 60 Hz: 150 mN·m / 1600 r/min
Three-Phase 230 VAC VAC / 60 Hz: 150 mN·m / 1600 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.05 A / 7 W
single-Phase 200 VAC / 60 Hz / 0.05 A / 7 W
single-Phase 220 VAC / 60 Hz / 0.05 A / 7 W
single-Phase 230 VAC VAC / 60 Hz / 0.05 A / 7 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 100 mN·m
- capacitor: -
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 2.0 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. (The power supply to the electromagnetic brake is kept and the brake is released.) When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 80 mm
- Output Power: 25 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.44 A
single-Phase 115 VAC / 60 Hz / 0.43 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 120 mN·m
single-Phase 115 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 170 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 170 mN·m / 1450 r/min - capacitor: Product name: CH60CFAUL2, Capacity: 6.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 1.5 kg
- Frame Size: 80 mm
- Output Power: 25 W
- Type: With Terminal Box
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.44 A
single-Phase 115 VAC / 60 Hz / 0.43 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 120 mN·m
single-Phase 115 VAC / 60 Hz: 120 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 170 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 170 mN·m / 1450 r/min - capacitor: Product name: CH60CFAUL2, Capacity: 6.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 1.8 kg
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 25 W
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 80 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
Items 781 - 800 of 16613