ORIENTAL MOTOR
Items 41 - 49 of 49
• Description of Specification Items
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 180
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing gearhead: Three-Phase 200 VAC / 50 Hz: 8.3 r/min
Three-Phase 200 VAC / 60 Hz: 10 r/min
Three-Phase 220 VAC / 60 Hz: 10 r/min
Three-Phase 230 VAC VAC / 60 Hz: 10 r/min - Permissible Torque of gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 3 N·m
Three-Phase 200 VAC / 60 Hz: 3 N·m
Three-Phase 220 VAC / 60 Hz: 3 N·m
Three-Phase 230 VAC VAC / 60 Hz: 3 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10-4 kg·m2
- capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: 50
- Time Rating: Continuous
- Rotation Direction: same direction as the motor shaft
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.081 A
Three-Phase 200 VAC / 60 Hz / 0.072 A
Three-Phase 220 VAC / 60 Hz / 0.076 A
Three-Phase 230 VAC VAC / 60 Hz / 0.079 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m
Three-Phase 200 VAC / 60 Hz: 41 mN·m
Three-Phase 220 VAC / 60 Hz: 41 mN·m
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 49 mN·m / 1200 r/min
Three-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min
Three-Phase 220 VAC / 60 Hz: 41 mN·m / 1500 r/min
Three-Phase 230 VAC VAC / 60 Hz: 41 mN·m / 1500 r/min - The Speed When Installing gearhead: Three-Phase 200 VAC / 50 Hz: 30 r/min
Three-Phase 200 VAC / 60 Hz: 36 r/min
Three-Phase 220 VAC / 60 Hz: 36 r/min
Three-Phase 230 VAC VAC / 60 Hz: 36 r/min - Permissible Torque of gearhead Output Shaft: Three-Phase 200 VAC / 50 Hz: 1.6 N·m
Three-Phase 200 VAC / 60 Hz: 1.4 N·m
Three-Phase 220 VAC / 60 Hz: 1.4 N·m
Three-Phase 230 VAC VAC / 60 Hz: 1.4 N·m - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 220 VAC / 60 Hz / 0.02 A / 3 W
single-Phase 230 VAC VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- Permissible Inertia J: 155×10-4 kg·m2
- capacitor: -
- Overheat Protective Device Type: Impedance protected
- Mass: 1.7 kg (With gearhead)
• UL/CSA, CCC, CE mark apply to the Motor.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
• The speed when the gearhead is installed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less, depending on the load.
2IK6SMB-60S motor with electromagnetic brake WK2 series
2IK6SMB-75S motor with electromagnetic brake WK2 series
2IK6SMB-90S motor with electromagnetic brake WK2 series
- Frame Size: 90 mm
- Output Power: 60 W
- Type: cable Type
- Shaft/Gear Type: Pinion Shaft Type
- Gear Ratio: -
- Electromagnetic Brake: Equipped
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.5 A
Three-Phase 200 VAC / 60 Hz / 0.43 A
Three-Phase 220 VAC / 60 Hz / 0.45 A
Three-Phase 230 VAC / 60 Hz / 0.46 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 600 mN·m
Three-Phase 200 VAC / 60 Hz: 500 mN·m
Three-Phase 220 VAC / 60 Hz: 500 mN·m
Three-Phase 230 VAC / 60 Hz: 500 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 450 mN·m / 1300 r/min
Three-Phase 200 VAC / 60 Hz: 380 mN·m / 1550 r/min
Three-Phase 220 VAC / 60 Hz: 380 mN·m / 1600 r/min
Three-Phase 230 VAC / 60 Hz: 380 mN·m / 1600 r/min - The Speed When Installing gearhead: Depends on the combination gearhead.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gearhead.
- Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.07 A / 10 W
single-Phase 200 VAC / 60 Hz / 0.07 A / 10 W
single-Phase 220 VAC / 60 Hz / 0.07 A / 10 W
single-Phase 230 VAC / 60 Hz / 0.07 A / 10 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 500 mN·m
- capacitor: -
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 3.4 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
5IK90A-SW2M motor with electromagnetic brake WK2 series
5IK90GE-SW2M motor with electromagnetic brake WK2 series
- Frame Size: 90 mm
- Output Power: 90 W
- Type: cable Type
- Shaft/Gear Type: Pinion Shaft Type
- Gear Ratio: -
- Electromagnetic Brake: Equipped
- Time Rating: Continuous
- Rotation Direction: Depends on the combination gearhead.
- Voltage/ Frequency/ Current: Three-Phase 200 VAC / 50 Hz / 0.64 A
Three-Phase 200 VAC / 60 Hz / 0.59 A
Three-Phase 220 VAC / 60 Hz / 0.6 A
Three-Phase 230 VAC / 60 Hz / 0.61 A - Starting Torque (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 850 mN·m
Three-Phase 200 VAC / 60 Hz: 700 mN·m
Three-Phase 220 VAC / 60 Hz: 700 mN·m
Three-Phase 230 VAC / 60 Hz: 700 mN·m - Rated torque/ Rated Speed (Motor Shaft): Three-Phase 200 VAC / 50 Hz: 680 mN·m / 1300 r/min
Three-Phase 200 VAC / 60 Hz: 570 mN·m / 1550 r/min
Three-Phase 220 VAC / 60 Hz: 570 mN·m / 1600 r/min
Three-Phase 230 VAC / 60 Hz: 570 mN·m / 1600 r/min - The Speed When Installing gearhead: Depends on the combination gearhead.
- Permissible Torque of gearhead Output Shaft: Depends on the combination gearhead.
- Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.07 A / 10 W
single-Phase 200 VAC / 60 Hz / 0.07 A / 10 W
single-Phase 220 VAC / 60 Hz / 0.07 A / 10 W
single-Phase 230 VAC / 60 Hz / 0.07 A / 10 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 500 mN·m
- capacitor: -
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 3.9 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• It does no built-in simple brake similar to reversible motor
[Note]
• Torque motor has a sloping characteristic, so the torque at the time of starting is the maximum.
Items 41 - 49 of 49