ORIENTAL MOTOR
Items 41 - 80 of 338
• Description of Specification Items
• The product name written on the motor nameplate is 2RK6A-CW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 200 VAC capacitor included (this product)
E: single-phase 220 VAC/230 VAC capacitor included. (2RK6A-CW2E)
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.12 A
single-Phase 200 VAC / 60 Hz / 0.138 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 50 mN·m
single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.7 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
2RK6A-CW2MBE motor with electromagnetic brake WK2 series
• The product name written on the motor nameplate is 2RK6A-CW2MB. The suffix of the product name above indicates the type of capacitor.
J: single-phase 200 VAC capacitor included (this product)
E: single-phase 220 VAC/230 VAC capacitor included. (2RK6A-CW2MBE)
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: With Terminal Box
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.113 A
single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 50 mN·m
single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 1.3 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor.
- Output power: 6 W
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 60 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• The product name written on the motor nameplate is 2RK6A-CW2M. The suffix of the product name above indicates the type of capacitor.
J: single-phase 200 VAC capacitor included (this product)
E: single-phase 220 VAC/230 VAC capacitor included. (2RK6A-CW2ME)
- Frame Size: 60 mm
- Output Power: 6 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.113 A
single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 50 mN·m
single-Phase 200 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 49 mN·m / 1150 r/min
single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - Electromagnetic Brake Brake Type: Power off activated type
- Electromagnetic Brake Voltage/ Frequency/ Current/ Input: single-Phase 200 VAC / 50 Hz / 0.02 A / 3 W
single-Phase 200 VAC / 60 Hz / 0.02 A / 3 W - Electromagnetic Brake Static Friction Torque (Motor Shaft): 30 mN·m
- capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Mass: 0.9 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• It does no built-in simple brake similar to reversible motor.
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.239 A
single-Phase 100 VAC / 60 Hz / 0.263 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 49 mN·m
single-Phase 100 VAC / 60 Hz: 50 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 52 mN·m / 1100 r/min
single-Phase 100 VAC / 60 Hz: 41 mN·m / 1400 r/min - capacitor: Product name: CH40FAUL2, Capacity: 4.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.75 kg
2RK6A-JAM motor with electromagnetic brake K2 series
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.119 A
single-Phase 200 VAC / 60 Hz / 0.131 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 47 mN·m
single-Phase 200 VAC / 60 Hz: 48 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 52 mN·m / 1100 r/min
single-Phase 200 VAC / 60 Hz: 41 mN·m / 1400 r/min - capacitor: Product name: CH10BFAUL, Capacity: 1.0 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.75 kg
2RK6A-JCM motor with electromagnetic brake K2 series
- Frame Size: 60 mm
- Output Power: 6 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.220 A
single-Phase 115 VAC / 60 Hz / 0.225 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 40 mN·m
single-Phase 115 VAC / 60 Hz: 45 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 39 mN·m / 1490 r/min
single-Phase 115 VAC / 60 Hz: 39 mN·m / 1490 r/min - capacitor: Product name: CH30FAUL2, Capacity: 3.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Impedance protected
- Motor Section Mass: 0.75 kg
2RK6RA-AW2J speed-control motor WK2 series
The Product Name Listed on the Motor Nameplate: 2RK6RA-AW2
The product name is suffixed with a symbol indicating the type of capacitor.
U: capacitor for single-phase 110/115 VAC Is Included (Products)
J: single-phase 100 VAC capacitor is Included. (2RK6RA-AW2J)
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: 30 Minutes
- Motor Type: speed-control motor, Reversible Type
- Shaft/Gear Type: Round Shaft Type
- Type: Lead Wire Type
- capacitor: Product Name: CH35FAUL2, Capacitance: 3.5 µF, Rated Voltage: 250 VAC
- Power Supply Input Frequency: single-Phase 110/115VAC 60 Hz
- Overheat Protective Device Type: Impedance protected
2RK6RA-CW2E speed-control motor WK2 series
The Product Name Listed on the Motor Nameplate: 2RK6RA-CW2
The product name is suffixed with a symbol indicating the type of capacitor.
J: single-phase 200 VAC capacitor is included. (This product)
E: single-phase 220/230 VAC capacitors are Included. (2RK6RA-CW2E)
- Frame Size: 60 mm
- Output Power: 6 W
- Time Rating: 30 Minutes
- Motor Type: speed-control motor, Reversible Type
- Shaft/Gear Type: Round Shaft Type
- Type: Lead Wire Type
- capacitor: Product Name: CH10BFAUL, Capacitance: 1.0 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: single-Phase 200 VAC 50/60 Hz
- Overheat Protective Device Type: Impedance protected
High-efficiency reaction synchronous reluctance motor for constant-speed industrial applications with precise, slip-free operation.
High-efficiency reaction synchronous reluctance motor for constant-speed industrial applications with precise, slip-free operation.
- Frame Size: 60 mm
- Output Power: 3.5 W
- Shaft/Gear Type: Round Shaft Type
- Gear Ratio: -
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.25 A
- Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 23 mN·m
- Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 23 mN·m / 1500 r/min
- capacitor: Product name: CH15BUL, Capacity: 1.5 µF, Rated voltage: 400 VAC
- Overheat Protective Device Type: Impedance protected
In stock
2IK6A-CWE AC motor incl. ext. capacitor
6 Watt 230 V1AC; 50 Hz; without a terminal box; 0,10 A;
Startmoment 47 mNm; Nennmoment 50 mNm; 1200 1/min; Betriebskondensator 0,6 µF; IP20;
Katalog:
https://elektromotoren.de/Produkte/O039/O039_induktionsmotoren_a17-58.pdf
3IK15A-AW2J general-purpose motor WK2 series
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
3IK15A-CW2J general-purpose motor WK2 series
- Frame Size: 70 mm
- Output Power: 15 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 220 VAC / 50 Hz / 0.19 A
single-Phase 220 VAC / 60 Hz / 0.16 A
single-Phase 230 VAC / 50 Hz / 0.19 A
single-Phase 230 VAC / 60 Hz / 0.16 A - Starting Torque (Motor Shaft): single-Phase 220 VAC / 50 Hz: 70 mN·m
single-Phase 220 VAC / 60 Hz: 65 mN·m
single-Phase 230 VAC / 50 Hz: 75 mN·m
single-Phase 230 VAC / 60 Hz: 65 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 220 VAC / 50 Hz: 125 mN·m / 1200 r/min
single-Phase 220 VAC / 60 Hz: 105 mN·m / 1450 r/min
single-Phase 230 VAC / 50 Hz: 125 mN·m / 1200 r/min
single-Phase 230 VAC / 60 Hz: 105 mN·m / 1450 r/min - capacitor: Product name: CH10BFAUL, Capacity: 1 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.1 kg
- Frame Size: 70 mm
- Output Power: 15 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 100 VAC / 50 Hz / 0.35 A
single-Phase 100 VAC / 60 Hz / 0.33 A - Starting Torque (Motor Shaft): single-Phase 100 VAC / 50 Hz: 73 mN·m
single-Phase 100 VAC / 60 Hz: 65 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 100 VAC / 50 Hz: 120 mN·m / 1200 r/min
single-Phase 100 VAC / 60 Hz: 100 mN·m / 1500 r/min - capacitor: Product name: CH50FAUL2, Capacity: 5.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 1.1 kg
- Frame Size: 70 mm
- Output Power: 15 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.17 A
single-Phase 200 VAC / 60 Hz / 0.17 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 80 mN·m
single-Phase 200 VAC / 60 Hz: 65 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 120 mN·m / 1200 r/min
single-Phase 200 VAC / 60 Hz: 100 mN·m / 1500 r/min - capacitor: Product name: CH13BFAUL, Capacity: 1.3 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 1.1 kg
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Frame Size: 70 mm
- Output Power: 15 W
- Type: Lead Wire Type
- Shaft/Gear Type: Round Shaft Type
- Shaft Material: iron
- Gear Ratio: -
- Electromagnetic Brake: Not Equipped
- Time Rating: Continuous
- Voltage/ Frequency/ Current: single-Phase 110 VAC / 60 Hz / 0.31 A
single-Phase 115 VAC / 60 Hz / 0.31 A - Starting Torque (Motor Shaft): single-Phase 110 VAC / 60 Hz: 65 mN·m
single-Phase 115 VAC / 60 Hz: 65 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 110 VAC / 60 Hz: 105 mN·m / 1450 r/min
single-Phase 115 VAC / 60 Hz: 105 mN·m / 1450 r/min - capacitor: Product name: CH40FAUL2, Capacity: 4.0 µF, Rated voltage: 250 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Motor Section Mass: 1.1 kg
3IK15RA-AW2J speed-control motor WK2 series
3IK15RA-AW2U speed-control motor WK2 series
The Product Name Listed on the Motor Nameplate: 3IK15RA-CW2
The product name is suffixed with a symbol indicating the type of capacitor.
E: single-phase 220/230 VAC capacitors are included. (Products)
J: single-phase 200 VAC capacitor is Included. (3IK15RA-CW2J)
- Frame Size: 70 mm
- Output Power: 15 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Induction Motor
- Shaft/Gear Type: Round Shaft Type
- Type: Lead Wire Type
- capacitor: Product Name: CH10BFAUL, Capacitance: 1.0 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: single-Phase 220/230 VAC 50/60 Hz
- Overheat Protective Device Type: Thermal protector
The Product Name Listed on the Motor Nameplate: 3IK15RA-CW2
The product name is suffixed with a symbol indicating the type of capacitor.
J: single-phase 200 VAC capacitor is included. (This product)
E: single-phase 220/230 VAC capacitors are Included. (3IK15RA-CW2E)
- Frame Size: 70 mm
- Output Power: 15 W
- Time Rating: Continuous
- Motor Type: speed-control motor, Induction Motor
- Shaft/Gear Type: Round Shaft Type
- Type: Lead Wire Type
- capacitor: Product Name: CH15BFAUL, Capacitance: 1.5 µF, Rated Voltage: 450 VAC
- Power Supply Input Frequency: single-Phase 200 VAC 50/60 Hz
- Overheat Protective Device Type: Thermal protector
3RK15A-AW2J general-purpose motor WK2 series
3RK15A-AW2MJ motor with electromagnetic brake WK2 series
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Output power: 15 W
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
- Motor frame size: 70 mm
Optional with holding brake
Degree of protection IP20
- RoHS compliant
- incl. a codenser with protective cap for AC motors
Includes fixing screws, washers and nuts
The engine speed is calculated by synchronous engine speed (50 Hz): 1500 min-1, 60 Hz: 1800 min-1) is divided by the transmission reduction.
Depending on the load, the actual speed 2-20 % is lower than the value listed here.
• The product name written on the motor nameplate is 3RK15A-CW2. The suffix of the product name above indicates the type of capacitor.
J: single-phase 200 VAC capacitor included (this product)
E: single-phase 220 VAC/230 VAC capacitor included. (3RK15A-CW2E)
- Frame Size: 70 mm
- Output Power: 15 W
- series: World K series
- Type: Lead Wire Type
- Gear Ratio: -
- Time Rating: 30 MInutes
- Voltage/ Frequency/ Current: single-Phase 200 VAC / 50 Hz / 0.21 A
single-Phase 200 VAC / 60 Hz / 0.24 A - Starting Torque (Motor Shaft): single-Phase 200 VAC / 50 Hz: 100 mN·m
single-Phase 200 VAC / 60 Hz: 100 mN·m - Rated torque/ Rated Speed (Motor Shaft): single-Phase 200 VAC / 50 Hz: 125 mN·m / 1200 r/min
single-Phase 200 VAC / 60 Hz: 105 mN·m / 1450 r/min - capacitor: Product name: CH18BFAUL, Capacity: 1.8 µF, Rated voltage: 450 VAC
- Overheat Protective Device Type: Thermal protector (Automatic return type)
- Mass: 1.1 kg
• Certification regarding various safety standards is acquired for the product name on the motor nameplate.
• The product name listed on the motor nameplate does not include the code (J) that indicates the type of capacitor.
• The rated torque and starting torque of the reversible motor are shown without the friction brake installed.
[Note]
• If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting.
Items 41 - 80 of 338